include/configs/npi_imx6ull.h

   1 /* SPDX-License-Identifier: GPL-2.0+
   2  *
   3  * Copyright (c) 2021 Linumiz
   4  * Author: Navin Sankar Velliangiri <navin@linumiz.com>
   5  */
   6
   7 #ifndef _NPI_IMX6ULL_H
   8 #define _NPI_IMX6ULL_H
   9
  10 #include <linux/sizes.h>
  11 #include "mx6_common.h"
  12
  13 /* SPL options */
  14 #include "imx6_spl.h"
  15
  16 #define CONFIG_SYS_FSL_USDHC_NUM        1
  17
  18 /* Console configs */
  19 #define CONFIG_MXC_UART_BASE            UART1_BASE
  20
  21 /* MMC Configs */
  22 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC2_BASE_ADDR
  23
  24 #define CONFIG_NETMASK                  255.255.255.0
  25
  26 #define CONFIG_SYS_HZ                   1000
  27
  28 /* Physical Memory Map */
  29 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
  30
  31 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
  32 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
  33 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
  34
  35 #define CONFIG_SYS_INIT_SP_OFFSET \
  36         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  37 #define CONFIG_SYS_INIT_SP_ADDR \
  38         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  39
  40 /* environment settings */
  41 #if defined(CONFIG_ENV_IS_IN_MMC)
  42 #define CONFIG_SYS_MMC_ENV_DEV          0
  43 #elif defined(CONFIG_ENV_IS_IN_NAND)
  44 #undef CONFIG_ENV_SIZE
  45 #define CONFIG_ENV_SECT_SIZE            (128 << 10)
  46 #define CONFIG_ENV_SIZE                 CONFIG_ENV_SECT_SIZE
  47 #endif
  48
  49 /* NAND */
  50 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  51 #define CONFIG_SYS_NAND_BASE            0x40000000
  52
  53 /* USB Configs */
  54 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  55 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
  56 #define CONFIG_MXC_USB_FLAGS            0
  57 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1
  58
  59 #ifdef CONFIG_CMD_NET
  60 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  61 #define CONFIG_FEC_MXC_PHYADDR          0x1
  62 #define CONFIG_FEC_XCV_TYPE             RMII
  63 #define CONFIG_ETHPRIME                 "eth0"
  64 #endif
  65
  66 #define CONFIG_IMX_THERMAL
  67
  68 #define CONFIG_FEC_ENET_DEV             1
  69
  70 #define CONFIG_EXTRA_ENV_SETTINGS \
  71         "console=ttymxc0,115200n8\0" \
  72         "image=zImage\0" \
  73         "fdtfile=imx6ull-seeed-npi-dev-board.dtb\0" \
  74         "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
  75         "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
  76         "fdt_addr_r=0x82000000\0" \
  77         "kernel_addr_r=0x81000000\0" \
  78         "pxefile_addr_r=0x87100000\0" \
  79         "ramdisk_addr_r=0x82100000\0" \
  80         "scriptaddr=0x87000000\0" \
  81         "root=/dev/mmcblk0p2 rootwait\0" \
  82         BOOTENV
  83
  84 #define BOOT_TARGET_DEVICES(func) \
  85         func(MMC, mmc, 0) \
  86         func(UBIFS, ubifs, 0) \
  87         func(PXE, pxe, na) \
  88         func(DHCP, dhcp, na)
  89
  90 #include <config_distro_bootcmd.h>
  91
  92 #endif /* _NPI_IMX6ULL_H */