include/configs/npi_imx6ull.h

   1 /* SPDX-License-Identifier: GPL-2.0+
   2  *
   3  * Copyright (c) 2021 Linumiz
   4  * Author: Navin Sankar Velliangiri <navin@linumiz.com>
   5  */
   6
   7 #ifndef _NPI_IMX6ULL_H
   8 #define _NPI_IMX6ULL_H
   9
  10 #include <linux/sizes.h>
  11 #include "mx6_common.h"
  12
  13 /* SPL options */
  14 #include "imx6_spl.h"
  15
  16 #define CONFIG_SYS_FSL_USDHC_NUM        1
  17
  18 /* Size of malloc() poll */
  19 #define CONFIG_SYS_MALLOC_LEN           SZ_2M
  20
  21 /* Console configs */
  22 #define CONFIG_MXC_UART_BASE            UART1_BASE
  23
  24 /* MMC Configs */
  25 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC2_BASE_ADDR
  26
  27 #define CONFIG_NETMASK                  255.255.255.0
  28
  29 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
  30 #define CONFIG_SYS_HZ                   1000
  31
  32 /* Physical Memory Map */
  33 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
  34
  35 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
  36 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
  37 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
  38
  39 #define CONFIG_SYS_INIT_SP_OFFSET \
  40         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  41 #define CONFIG_SYS_INIT_SP_ADDR \
  42         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  43
  44 /* environment settings */
  45 #if defined(CONFIG_ENV_IS_IN_MMC)
  46 #define CONFIG_SYS_MMC_ENV_DEV          0
  47 #elif defined(CONFIG_ENV_IS_IN_NAND)
  48 #undef CONFIG_ENV_SIZE
  49 #define CONFIG_ENV_SECT_SIZE            (128 << 10)
  50 #define CONFIG_ENV_SIZE                 CONFIG_ENV_SECT_SIZE
  51 #endif
  52
  53 /* NAND */
  54 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  55 #define CONFIG_SYS_NAND_BASE            0x40000000
  56
  57 /* USB Configs */
  58 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  59 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
  60 #define CONFIG_MXC_USB_FLAGS            0
  61 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1
  62
  63 #ifdef CONFIG_CMD_NET
  64 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  65 #define CONFIG_FEC_MXC_PHYADDR          0x1
  66 #define CONFIG_FEC_XCV_TYPE             RMII
  67 #define CONFIG_ETHPRIME                 "eth0"
  68 #endif
  69
  70 #define CONFIG_IMX_THERMAL
  71
  72 #define CONFIG_FEC_ENET_DEV             1
  73
  74 #define CONFIG_EXTRA_ENV_SETTINGS \
  75         "console=ttymxc0,115200n8\0" \
  76         "image=zImage\0" \
  77         "fdtfile=imx6ull-seeed-npi-dev-board.dtb\0" \
  78         "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
  79         "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
  80         "fdt_addr_r=0x82000000\0" \
  81         "kernel_addr_r=0x81000000\0" \
  82         "pxefile_addr_r=0x87100000\0" \
  83         "ramdisk_addr_r=0x82100000\0" \
  84         "scriptaddr=0x87000000\0" \
  85         "root=/dev/mmcblk0p2 rootwait\0" \
  86         BOOTENV
  87
  88 #define BOOT_TARGET_DEVICES(func) \
  89         func(MMC, mmc, 0) \
  90         func(UBIFS, ubifs, 0) \
  91         func(PXE, pxe, na) \
  92         func(DHCP, dhcp, na)
  93
  94 #include <config_distro_bootcmd.h>
  95
  96 #endif /* _NPI_IMX6ULL_H */