include/configs/novena.h

   1 /*
   2  * Configuration settings for the Novena U-boot.
   3  *
   4  * Copyright (C) 2014 Marek Vasut <marex@denx.de>
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 /* System configurations */
  13 #define CONFIG_MX6
  14 #define CONFIG_BOARD_EARLY_INIT_F
  15 #define CONFIG_BOARD_LATE_INIT
  16 #define CONFIG_MISC_INIT_R
  17 #define CONFIG_DISPLAY_BOARDINFO
  18 #define CONFIG_DISPLAY_CPUINFO
  19 #define CONFIG_DOS_PARTITION
  20 #define CONFIG_FAT_WRITE
  21 #define CONFIG_FIT
  22 #define CONFIG_KEYBOARD
  23 #define CONFIG_MXC_GPIO
  24 #define CONFIG_OF_LIBFDT
  25 #define CONFIG_REGEX
  26 #define CONFIG_SYS_GENERIC_BOARD
  27 #define CONFIG_SYS_NO_FLASH
  28
  29 #include "configs/mx6_common.h"
  30 #include <asm/arch/imx-regs.h>
  31 #include <asm/imx-common/gpio.h>
  32 #include <config_cmd_default.h>
  33
  34 /* U-Boot Commands */
  35 #define CONFIG_CMD_ASKENV
  36 #define CONFIG_CMD_BMODE
  37 #define CONFIG_CMD_BOOTZ
  38 #define CONFIG_CMD_CACHE
  39 #define CONFIG_CMD_DHCP
  40 #define CONFIG_CMD_EEPROM
  41 #define CONFIG_CMD_EXT4
  42 #define CONFIG_CMD_EXT4_WRITE
  43 #define CONFIG_CMD_FAT
  44 #define CONFIG_CMD_FS_GENERIC
  45 #define CONFIG_CMD_I2C
  46 #define CONFIG_CMD_FUSE
  47 #define CONFIG_CMD_MII
  48 #define CONFIG_CMD_MMC
  49 #define CONFIG_CMD_NET
  50 #define CONFIG_CMD_PCI
  51 #define CONFIG_CMD_PING
  52 #define CONFIG_CMD_SATA
  53 #define CONFIG_CMD_SETEXPR
  54 #define CONFIG_CMD_TIME
  55 #define CONFIG_CMD_USB
  56 #define CONFIG_VIDEO
  57
  58 /* U-Boot general configurations */
  59 #define CONFIG_SYS_LONGHELP
  60 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O buffer size */
  61 #define CONFIG_SYS_MAXARGS      32              /* Max number of command args */
  62 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
  63                                                 /* Boot argument buffer size */
  64 #define CONFIG_VERSION_VARIABLE                 /* U-BOOT version */
  65 #define CONFIG_AUTO_COMPLETE                    /* Command auto complete */
  66 #define CONFIG_CMDLINE_EDITING                  /* Command history etc */
  67 #define CONFIG_SYS_HUSH_PARSER
  68
  69 /* U-Boot environment */
  70 #define CONFIG_ENV_OVERWRITE
  71 #define CONFIG_ENV_SIZE                 (16 * 1024)
  72 /*
  73  * Environment is on MMC, starting at offset 512KiB from start of the card.
  74  * Please place first partition at offset 1MiB from the start of the card
  75  * as recommended by GNU/fdisk. See below for details:
  76  * http://homepage.ntlworld.com./jonathan.deboynepollard/FGA/disc-partition-alignment.html
  77  */
  78 #ifdef CONFIG_CMD_MMC
  79 #define CONFIG_ENV_IS_IN_MMC
  80 #define CONFIG_SYS_MMC_ENV_DEV          0
  81 #define CONFIG_ENV_OFFSET               (512 * 1024)
  82 #define CONFIG_ENV_SIZE_REDUND          CONFIG_ENV_SIZE
  83 #define CONFIG_ENV_OFFSET_REDUND        \
  84                 (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
  85 #else
  86 #define CONFIG_ENV_IS_NOWHERE
  87 #endif
  88
  89 /* Booting Linux */
  90 #define CONFIG_BOOTDELAY                5
  91 #define CONFIG_BOOTFILE                 "fitImage"
  92 #define CONFIG_BOOTARGS                 "console=ttymxc1,115200 "
  93 #define CONFIG_BOOTCOMMAND              "run net_nfs"
  94 #define CONFIG_LOADADDR                 0x18000000
  95 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
  96 #define CONFIG_HOSTNAME                 novena
  97
  98 /* Physical Memory Map */
  99 #define CONFIG_NR_DRAM_BANKS            1
 100 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 101 #define PHYS_SDRAM_SIZE                 0xF0000000
 102
 103 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 104 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 105 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 106
 107 #define CONFIG_SYS_INIT_SP_OFFSET \
 108         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 109 #define CONFIG_SYS_INIT_SP_ADDR \
 110         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 111
 112 #define CONFIG_SYS_MEMTEST_START        0x10000000
 113 #define CONFIG_SYS_MEMTEST_END          0x20000000
 114
 115 #define CONFIG_SYS_MALLOC_LEN           (64 * 1024 * 1024)
 116
 117 /* SPL */
 118 #define CONFIG_SPL_FAT_SUPPORT
 119 #define CONFIG_SPL_MMC_SUPPORT
 120 #include "imx6_spl.h"                   /* common IMX6 SPL configuration */
 121
 122 #define CONFIG_CMDLINE_TAG
 123 #define CONFIG_SETUP_MEMORY_TAGS
 124 #define CONFIG_INITRD_TAG
 125 #define CONFIG_REVISION_TAG
 126
 127 /* Ethernet Configuration */
 128 #ifdef CONFIG_CMD_NET
 129 #define CONFIG_FEC_MXC
 130 #define CONFIG_MII
 131 #define IMX_FEC_BASE                    ENET_BASE_ADDR
 132 #define CONFIG_FEC_XCV_TYPE             RGMII
 133 #define CONFIG_ETHPRIME                 "FEC"
 134 #define CONFIG_FEC_MXC_PHYADDR          0x7
 135 #define CONFIG_PHYLIB
 136 #define CONFIG_PHY_MICREL
 137 #define CONFIG_PHY_MICREL_KSZ9021
 138 #define CONFIG_ARP_TIMEOUT              200UL
 139 #endif
 140
 141 /* I2C */
 142 #define CONFIG_SYS_I2C
 143 #define CONFIG_SYS_I2C_MXC
 144 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 145 #define CONFIG_I2C_MULTI_BUS
 146 #define CONFIG_I2C_MXC
 147 #define CONFIG_SYS_I2C_SPEED            100000
 148
 149 /* I2C EEPROM */
 150 #ifdef CONFIG_CMD_EEPROM
 151 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2
 152 #define CONFIG_SYS_SPD_BUS_NUM          2
 153 #endif
 154
 155 /* MMC Configs */
 156 #ifdef CONFIG_CMD_MMC
 157 #define CONFIG_MMC
 158 #define CONFIG_GENERIC_MMC
 159 #define CONFIG_BOUNCE_BUFFER
 160 #define CONFIG_FSL_ESDHC
 161 #define CONFIG_FSL_USDHC
 162 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
 163 #define CONFIG_SYS_FSL_USDHC_NUM        2
 164 #endif
 165
 166 /* OCOTP Configs */
 167 #ifdef CONFIG_CMD_FUSE
 168 #define CONFIG_MXC_OCOTP
 169 #endif
 170
 171 /* PCI express */
 172 #ifdef CONFIG_CMD_PCI
 173 #define CONFIG_PCI
 174 #define CONFIG_PCI_PNP
 175 #define CONFIG_PCI_SCAN_SHOW
 176 #define CONFIG_PCIE_IMX
 177 #define CONFIG_PCIE_IMX_PERST_GPIO      IMX_GPIO_NR(3, 29)
 178 #define CONFIG_PCIE_IMX_POWER_GPIO      IMX_GPIO_NR(7, 12)
 179 #endif
 180
 181 /* PMIC */
 182 #define CONFIG_POWER
 183 #define CONFIG_POWER_I2C
 184 #define CONFIG_POWER_PFUZE100
 185 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
 186
 187 /* SATA Configs */
 188 #ifdef CONFIG_CMD_SATA
 189 #define CONFIG_DWC_AHSATA
 190 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 191 #define CONFIG_DWC_AHSATA_PORT_ID       0
 192 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
 193 #define CONFIG_LBA48
 194 #define CONFIG_LIBATA
 195 #endif
 196
 197 /* UART */
 198 #define CONFIG_MXC_UART
 199 #define CONFIG_MXC_UART_BASE            UART2_BASE
 200 #define CONFIG_BAUDRATE                 115200
 201 #define CONFIG_CONS_INDEX               1
 202
 203 /* USB Configs */
 204 #ifdef CONFIG_CMD_USB
 205 #define CONFIG_USB_EHCI
 206 #define CONFIG_USB_EHCI_MX6
 207 #define CONFIG_USB_STORAGE
 208 #define CONFIG_USB_KEYBOARD
 209 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
 210 #define CONFIG_USB_HOST_ETHER
 211 #define CONFIG_USB_ETHER_ASIX
 212 #define CONFIG_USB_ETHER_SMSC95XX
 213 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 214 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
 215 #define CONFIG_MXC_USB_FLAGS            0
 216 /* Gadget part */
 217 #define CONFIG_CI_UDC
 218 #define CONFIG_USBD_HS
 219 #define CONFIG_USB_GADGET_DUALSPEED
 220 #define CONFIG_USB_ETHER
 221 #define CONFIG_USB_ETH_CDC
 222 #define CONFIG_NETCONSOLE
 223 #endif
 224
 225 /* Video output */
 226 #ifdef CONFIG_VIDEO
 227 #define CONFIG_VIDEO_IPUV3
 228 #define CONFIG_CFB_CONSOLE
 229 #define CONFIG_VGA_AS_SINGLE_DEVICE
 230 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 231 #define CONFIG_VIDEO_BMP_RLE8
 232 #define CONFIG_SPLASH_SCREEN
 233 #define CONFIG_BMP_16BPP
 234 #define CONFIG_VIDEO_LOGO
 235 #define CONFIG_IPUV3_CLK                260000000
 236 #define CONFIG_CMD_HDMIDETECT
 237 #define CONFIG_CONSOLE_MUX
 238 #define CONFIG_IMX_HDMI
 239 #define CONFIG_IMX_VIDEO_SKIP
 240 #endif
 241
 242 /* Extra U-Boot environment. */
 243 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 244         "fdt_high=0xffffffff\0"                                         \
 245         "initrd_high=0xffffffff\0"                                      \
 246         "consdev=ttymxc1\0"                                             \
 247         "baudrate=115200\0"                                             \
 248         "bootdev=/dev/mmcblk0p1\0"                                      \
 249         "rootdev=/dev/mmcblk0p2\0"                                      \
 250         "netdev=eth0\0"                                                 \
 251         "kernel_addr_r=0x18000000\0"                                    \
 252         "addcons="                                                      \
 253                 "setenv bootargs ${bootargs} "                          \
 254                 "console=${consdev},${baudrate}\0"                      \
 255         "addip="                                                        \
 256                 "setenv bootargs ${bootargs} "                          \
 257                 "ip=${ipaddr}:${serverip}:${gatewayip}:"                \
 258                         "${netmask}:${hostname}:${netdev}:off\0"        \
 259         "addmisc="                                                      \
 260                 "setenv bootargs ${bootargs} ${miscargs}\0"             \
 261         "addargs=run addcons addmisc\0"                                 \
 262         "mmcload="                                                      \
 263                 "mmc rescan ; "                                         \
 264                 "ext4load mmc 0:1 ${kernel_addr_r} ${bootfile}\0"       \
 265         "netload="                                                      \
 266                 "tftp ${kernel_addr_r} ${hostname}/${bootfile}\0"       \
 267         "miscargs=nohlt panic=1\0"                                      \
 268         "mmcargs=setenv bootargs root=${rootdev} rw rootwait\0"         \
 269         "nfsargs="                                                      \
 270                 "setenv bootargs root=/dev/nfs rw "                     \
 271                         "nfsroot=${serverip}:${rootpath},v3,tcp\0"      \
 272         "mmc_mmc="                                                      \
 273                 "run mmcload mmcargs addargs ; "                        \
 274                 "bootm ${kernel_addr_r}\0"                              \
 275         "mmc_nfs="                                                      \
 276                 "run mmcload nfsargs addip addargs ; "                  \
 277                 "bootm ${kernel_addr_r}\0"                              \
 278         "net_mmc="                                                      \
 279                 "run netload mmcargs addargs ; "                        \
 280                 "bootm ${kernel_addr_r}\0"                              \
 281         "net_nfs="                                                      \
 282                 "run netload nfsargs addip addargs ; "                  \
 283                 "bootm ${kernel_addr_r}\0"                              \
 284         "update_sd_spl_filename=SPL\0"                                  \
 285         "update_sd_uboot_filename=u-boot.img\0"                         \
 286         "update_sd_firmware="   /* Update the SD firmware partition */  \
 287                 "if mmc rescan ; then "                                 \
 288                 "if dhcp ${update_sd_spl_filename} ; then "             \
 289                 "mmc write ${loadaddr} 2 0x200 ; "                      \
 290                 "fi ; "                                                 \
 291                 "if dhcp ${update_sd_uboot_filename} ; then "           \
 292                 "fatwrite mmc 0:1 ${loadaddr} u-boot.img ${filesize} ; "\
 293                 "fi ; "                                                 \
 294                 "fi\0"                                                  \
 295
 296 #endif                          /* __CONFIG_H */