include/configs/novena.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Configuration settings for the Novena U-Boot.
   4  *
   5  * Copyright (C) 2014 Marek Vasut <marex@denx.de>
   6  */
   7
   8 #ifndef __CONFIG_H
   9 #define __CONFIG_H
  10
  11 /* System configurations */
  12 #define CONFIG_KEYBOARD
  13
  14 #include "mx6_common.h"
  15
  16 /* U-Boot Commands */
  17
  18 /* U-Boot general configurations */
  19
  20 /* U-Boot environment */
  21 /*
  22  * Environment is on MMC, starting at offset 512KiB from start of the card.
  23  * Please place first partition at offset 1MiB from the start of the card
  24  * as recommended by GNU/fdisk. See below for details:
  25  * http://homepage.ntlworld.com./jonathan.deboynepollard/FGA/disc-partition-alignment.html
  26  */
  27 #ifdef CONFIG_CMD_MMC
  28 #define CONFIG_SYS_MMC_ENV_DEV          0
  29 #endif
  30
  31 /* Booting Linux */
  32 #define CONFIG_BOOTFILE                 "fitImage"
  33 #define CONFIG_HOSTNAME                 "novena"
  34
  35 /* Physical Memory Map */
  36 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
  37
  38 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
  39 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
  40 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
  41
  42 #define CONFIG_SYS_INIT_SP_OFFSET \
  43         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  44 #define CONFIG_SYS_INIT_SP_ADDR \
  45         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  46
  47 #define CONFIG_SYS_MEMTEST_START        0x10000000
  48 #define CONFIG_SYS_MEMTEST_END          0x20000000
  49
  50 #define CONFIG_SYS_MALLOC_LEN           (64 * 1024 * 1024)
  51
  52 /* SPL */
  53 #include "imx6_spl.h"                   /* common IMX6 SPL configuration */
  54
  55 /* Ethernet Configuration */
  56 #ifdef CONFIG_CMD_NET
  57 #define CONFIG_FEC_MXC
  58 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  59 #define CONFIG_FEC_XCV_TYPE             RGMII
  60 #define CONFIG_ETHPRIME                 "FEC"
  61 #define CONFIG_FEC_MXC_PHYADDR          0x7
  62 #define CONFIG_ARP_TIMEOUT              200UL
  63 #endif
  64
  65 /* I2C */
  66 #define CONFIG_SYS_I2C
  67 #define CONFIG_SYS_I2C_MXC
  68 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  69 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  70 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  71 #define CONFIG_I2C_MULTI_BUS
  72 #define CONFIG_SYS_I2C_SPEED            100000
  73 #define CONFIG_SYS_SPD_BUS_NUM          0
  74
  75 /* I2C EEPROM */
  76 #ifdef CONFIG_CMD_EEPROM
  77 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2
  78 #define CONFIG_SYS_I2C_EEPROM_BUS       2
  79 #endif
  80
  81 /* MMC Configs */
  82 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  83 #define CONFIG_SYS_FSL_USDHC_NUM        2
  84
  85 /* PCI express */
  86 #ifdef CONFIG_CMD_PCI
  87 #define CONFIG_PCI_SCAN_SHOW
  88 #define CONFIG_PCIE_IMX
  89 #define CONFIG_PCIE_IMX_PERST_GPIO      IMX_GPIO_NR(3, 29)
  90 #define CONFIG_PCIE_IMX_POWER_GPIO      IMX_GPIO_NR(7, 12)
  91 #endif
  92
  93 /* PMIC */
  94 #define CONFIG_POWER
  95 #define CONFIG_POWER_I2C
  96 #define CONFIG_POWER_PFUZE100
  97 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
  98
  99 /* SATA Configs */
 100 #define CONFIG_LBA48
 101
 102 /* UART */
 103 #define CONFIG_MXC_UART
 104 #define CONFIG_MXC_UART_BASE            UART2_BASE
 105
 106 /* USB Configs */
 107 #ifdef CONFIG_CMD_USB
 108 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 109 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
 110 #define CONFIG_MXC_USB_FLAGS            0
 111 /* Gadget part */
 112 #define CONFIG_USBD_HS
 113 #define CONFIG_NETCONSOLE
 114 #endif
 115
 116 /* Video output */
 117 #define CONFIG_VIDEO_BMP_RLE8
 118 #define CONFIG_SPLASH_SCREEN
 119 #define CONFIG_BMP_16BPP
 120 #define CONFIG_VIDEO_LOGO
 121 #define CONFIG_IMX_HDMI
 122 #define CONFIG_IMX_VIDEO_SKIP
 123
 124 /* Extra U-Boot environment. */
 125 #ifndef CONFIG_SPL_BUILD
 126 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 127         "fdt_high=0xffffffff\0"                                         \
 128         "initrd_high=0xffffffff\0"                                      \
 129         "consdev=ttymxc1\0"                                             \
 130         "baudrate=115200\0"                                             \
 131         "bootdev=/dev/mmcblk0p1\0"                                      \
 132         "rootdev=/dev/mmcblk0p2\0"                                      \
 133         "netdev=eth0\0"                                                 \
 134         "kernel_addr_r="__stringify(CONFIG_LOADADDR)"\0"                \
 135         "pxefile_addr_r="__stringify(CONFIG_LOADADDR)"\0"               \
 136         "scriptaddr="__stringify(CONFIG_LOADADDR)"\0"                   \
 137         "ramdisk_addr_r=0x28000000\0"                                   \
 138         "fdt_addr_r=0x18000000\0"                                       \
 139         "fdtfile=imx6q-novena.dtb\0"                                    \
 140         "stdout=serial,vidconsole\0"                                    \
 141         "stderr=serial,vidconsole\0"                                    \
 142         "addcons="                                                      \
 143                 "setenv bootargs ${bootargs} "                          \
 144                 "console=${consdev},${baudrate}\0"                      \
 145         "addip="                                                        \
 146                 "setenv bootargs ${bootargs} "                          \
 147                 "ip=${ipaddr}:${serverip}:${gatewayip}:"                \
 148                         "${netmask}:${hostname}:${netdev}:off\0"        \
 149         "addmisc="                                                      \
 150                 "setenv bootargs ${bootargs} ${miscargs}\0"             \
 151         "addargs=run addcons addmisc\0"                                 \
 152         "mmcload="                                                      \
 153                 "mmc rescan ; "                                         \
 154                 "ext4load mmc 0:1 ${kernel_addr_r} ${bootfile}\0"       \
 155         "netload="                                                      \
 156                 "tftp ${kernel_addr_r} ${hostname}/${bootfile}\0"       \
 157         "miscargs=nohlt panic=1\0"                                      \
 158         "mmcargs=setenv bootargs root=${rootdev} rw rootwait\0"         \
 159         "nfsargs="                                                      \
 160                 "setenv bootargs root=/dev/nfs rw "                     \
 161                         "nfsroot=${serverip}:${rootpath},v3,tcp\0"      \
 162         "mmc_mmc="                                                      \
 163                 "run mmcload mmcargs addargs ; "                        \
 164                 "bootm ${kernel_addr_r}\0"                              \
 165         "mmc_nfs="                                                      \
 166                 "run mmcload nfsargs addip addargs ; "                  \
 167                 "bootm ${kernel_addr_r}\0"                              \
 168         "net_mmc="                                                      \
 169                 "run netload mmcargs addargs ; "                        \
 170                 "bootm ${kernel_addr_r}\0"                              \
 171         "net_nfs="                                                      \
 172                 "run netload nfsargs addip addargs ; "                  \
 173                 "bootm ${kernel_addr_r}\0"                              \
 174         "update_sd_spl_filename=SPL\0"                                  \
 175         "update_sd_uboot_filename=u-boot.img\0"                         \
 176         "update_sd_firmware="   /* Update the SD firmware partition */  \
 177                 "if mmc rescan ; then "                                 \
 178                 "if dhcp ${update_sd_spl_filename} ; then "             \
 179                 "mmc write ${loadaddr} 2 0x200 ; "                      \
 180                 "fi ; "                                                 \
 181                 "if dhcp ${update_sd_uboot_filename} ; then "           \
 182                 "fatwrite mmc 0:1 ${loadaddr} u-boot.img ${filesize} ; "\
 183                 "fi ; "                                                 \
 184                 "fi\0"                                                  \
 185         BOOTENV
 186
 187 #define BOOT_TARGET_DEVICES(func) \
 188         func(MMC, mmc, 0) \
 189         func(USB, usb, 0) \
 190         func(SATA, sata, 0) \
 191         func(PXE, pxe, na) \
 192         func(DHCP, dhcp, na)
 193
 194 #include <config_distro_bootcmd.h>
 195
 196 #else
 197 #define CONFIG_EXTRA_ENV_SETTINGS
 198 #endif /* CONFIG_SPL_BUILD */
 199
 200 #endif                          /* __CONFIG_H */