colibri-imx6ull: specify MTD partitions on command line
[platform/kernel/u-boot.git] / include / configs / novena.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Configuration settings for the Novena U-Boot.
4  *
5  * Copyright (C) 2014 Marek Vasut <marex@denx.de>
6  */
7
8 #ifndef __CONFIG_H
9 #define __CONFIG_H
10
11 /* System configurations */
12
13 #include "mx6_common.h"
14
15 /* U-Boot Commands */
16
17 /* U-Boot general configurations */
18
19 /* U-Boot environment */
20 /*
21  * Environment is on MMC, starting at offset 512KiB from start of the card.
22  * Please place first partition at offset 1MiB from the start of the card
23  * as recommended by GNU/fdisk. See below for details:
24  * http://homepage.ntlworld.com./jonathan.deboynepollard/FGA/disc-partition-alignment.html
25  */
26
27 /* Booting Linux */
28
29 /* Physical Memory Map */
30 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
31
32 #define CFG_SYS_SDRAM_BASE              PHYS_SDRAM
33 #define CFG_SYS_INIT_RAM_ADDR   IRAM_BASE_ADDR
34 #define CFG_SYS_INIT_RAM_SIZE   IRAM_SIZE
35
36 /* I2C EEPROM */
37
38 /* MMC Configs */
39 #define CFG_SYS_FSL_ESDHC_ADDR  0
40 #define CFG_SYS_FSL_USDHC_NUM   2
41
42 /* PCI express */
43 #ifdef CONFIG_CMD_PCI
44 #define CFG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(3, 29)
45 #define CFG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(7, 12)
46 #endif
47
48 /* PMIC */
49 #define CFG_POWER_PFUZE100_I2C_ADDR     0x08
50
51 /* UART */
52 #define CFG_MXC_UART_BASE               UART2_BASE
53
54 /* USB Configs */
55 #ifdef CONFIG_CMD_USB
56 #define CFG_MXC_USB_PORTSC              (PORT_PTS_UTMI | PORT_PTS_PTW)
57 #define CFG_MXC_USB_FLAGS               0
58 #endif
59
60 /* Extra U-Boot environment. */
61 #define CFG_EXTRA_ENV_SETTINGS                                  \
62         "fdt_high=0xffffffff\0"                                         \
63         "initrd_high=0xffffffff\0"                                      \
64         "consdev=ttymxc1\0"                                             \
65         "baudrate=115200\0"                                             \
66         "bootdev=/dev/mmcblk0p1\0"                                      \
67         "rootdev=/dev/mmcblk0p2\0"                                      \
68         "netdev=eth0\0"                                                 \
69         "kernel_addr_r="__stringify(CONFIG_SYS_LOAD_ADDR)"\0"           \
70         "pxefile_addr_r="__stringify(CONFIG_SYS_LOAD_ADDR)"\0"          \
71         "scriptaddr="__stringify(CONFIG_SYS_LOAD_ADDR)"\0"                      \
72         "ramdisk_addr_r=0x28000000\0"                                   \
73         "fdt_addr_r=0x18000000\0"                                       \
74         "fdtfile=imx6q-novena.dtb\0"                                    \
75         "stdout=serial,vidconsole\0"                                    \
76         "stderr=serial,vidconsole\0"                                    \
77         "addcons="                                                      \
78                 "setenv bootargs ${bootargs} "                          \
79                 "console=${consdev},${baudrate}\0"                      \
80         "addip="                                                        \
81                 "setenv bootargs ${bootargs} "                          \
82                 "ip=${ipaddr}:${serverip}:${gatewayip}:"                \
83                         "${netmask}:${hostname}:${netdev}:off\0"        \
84         "addmisc="                                                      \
85                 "setenv bootargs ${bootargs} ${miscargs}\0"             \
86         "addargs=run addcons addmisc\0"                                 \
87         "mmcload="                                                      \
88                 "mmc rescan ; "                                         \
89                 "ext4load mmc 0:1 ${kernel_addr_r} ${bootfile}\0"       \
90         "netload="                                                      \
91                 "tftp ${kernel_addr_r} ${hostname}/${bootfile}\0"       \
92         "miscargs=nohlt panic=1\0"                                      \
93         "mmcargs=setenv bootargs root=${rootdev} rw rootwait\0"         \
94         "nfsargs="                                                      \
95                 "setenv bootargs root=/dev/nfs rw "                     \
96                         "nfsroot=${serverip}:${rootpath},v3,tcp\0"      \
97         "mmc_mmc="                                                      \
98                 "run mmcload mmcargs addargs ; "                        \
99                 "bootm ${kernel_addr_r}\0"                              \
100         "mmc_nfs="                                                      \
101                 "run mmcload nfsargs addip addargs ; "                  \
102                 "bootm ${kernel_addr_r}\0"                              \
103         "net_mmc="                                                      \
104                 "run netload mmcargs addargs ; "                        \
105                 "bootm ${kernel_addr_r}\0"                              \
106         "net_nfs="                                                      \
107                 "run netload nfsargs addip addargs ; "                  \
108                 "bootm ${kernel_addr_r}\0"                              \
109         "update_sd_spl_filename=SPL\0"                                  \
110         "update_sd_uboot_filename=u-boot.img\0"                         \
111         "update_sd_firmware="   /* Update the SD firmware partition */  \
112                 "if mmc rescan ; then "                                 \
113                 "if dhcp ${update_sd_spl_filename} ; then "             \
114                 "mmc write ${loadaddr} 2 0x200 ; "                      \
115                 "fi ; "                                                 \
116                 "if dhcp ${update_sd_uboot_filename} ; then "           \
117                 "fatwrite mmc 0:1 ${loadaddr} u-boot.img ${filesize} ; "\
118                 "fi ; "                                                 \
119                 "fi\0"                                                  \
120         BOOTENV
121
122 #define BOOT_TARGET_DEVICES(func) \
123         func(MMC, mmc, 0) \
124         func(USB, usb, 0) \
125         func(SATA, sata, 0) \
126         func(PXE, pxe, na) \
127         func(DHCP, dhcp, na)
128
129 #include <config_distro_bootcmd.h>
130
131 #endif                          /* __CONFIG_H */