include/configs/novena.h

   1 /*
   2  * Configuration settings for the Novena U-boot.
   3  *
   4  * Copyright (C) 2014 Marek Vasut <marex@denx.de>
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 /* System configurations */
  13 #define CONFIG_BOARD_EARLY_INIT_F
  14 #define CONFIG_BOARD_LATE_INIT
  15 #define CONFIG_MISC_INIT_R
  16 #define CONFIG_FIT
  17 #define CONFIG_KEYBOARD
  18
  19 #include "mx6_common.h"
  20
  21 /* U-Boot Commands */
  22 #define CONFIG_CMD_ASKENV
  23 #define CONFIG_CMD_BMODE
  24 #define CONFIG_CMD_CACHE
  25 #define CONFIG_CMD_DHCP
  26 #define CONFIG_CMD_EEPROM
  27 #define CONFIG_CMD_I2C
  28 #define CONFIG_CMD_FUSE
  29 #define CONFIG_CMD_MII
  30 #define CONFIG_CMD_MMC
  31 #define CONFIG_CMD_NET
  32 #define CONFIG_CMD_PCI
  33 #define CONFIG_CMD_PING
  34 #define CONFIG_CMD_SATA
  35 #define CONFIG_CMD_SETEXPR
  36 #define CONFIG_CMD_TIME
  37 #define CONFIG_CMD_USB
  38 #define CONFIG_VIDEO
  39
  40 /* U-Boot general configurations */
  41 #define CONFIG_VERSION_VARIABLE                 /* U-BOOT version */
  42
  43 /* U-Boot environment */
  44 #define CONFIG_ENV_SIZE                 (16 * 1024)
  45 /*
  46  * Environment is on MMC, starting at offset 512KiB from start of the card.
  47  * Please place first partition at offset 1MiB from the start of the card
  48  * as recommended by GNU/fdisk. See below for details:
  49  * http://homepage.ntlworld.com./jonathan.deboynepollard/FGA/disc-partition-alignment.html
  50  */
  51 #ifdef CONFIG_CMD_MMC
  52 #define CONFIG_ENV_IS_IN_MMC
  53 #define CONFIG_SYS_MMC_ENV_DEV          0
  54 #define CONFIG_ENV_OFFSET               (512 * 1024)
  55 #define CONFIG_ENV_SIZE_REDUND          CONFIG_ENV_SIZE
  56 #define CONFIG_ENV_OFFSET_REDUND        \
  57                 (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
  58 #else
  59 #define CONFIG_ENV_IS_NOWHERE
  60 #endif
  61
  62 /* Booting Linux */
  63 #define CONFIG_BOOTFILE                 "fitImage"
  64 #define CONFIG_BOOTARGS                 "console=ttymxc1,115200 "
  65 #define CONFIG_BOOTCOMMAND              "run net_nfs"
  66 #define CONFIG_HOSTNAME                 novena
  67
  68 /* Physical Memory Map */
  69 #define CONFIG_NR_DRAM_BANKS            1
  70 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
  71 #define PHYS_SDRAM_SIZE                 0xF0000000
  72
  73 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
  74 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
  75 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
  76
  77 #define CONFIG_SYS_INIT_SP_OFFSET \
  78         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  79 #define CONFIG_SYS_INIT_SP_ADDR \
  80         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  81
  82 #define CONFIG_SYS_MEMTEST_START        0x10000000
  83 #define CONFIG_SYS_MEMTEST_END          0x20000000
  84
  85 #define CONFIG_SYS_MALLOC_LEN           (64 * 1024 * 1024)
  86
  87 /* SPL */
  88 #define CONFIG_SPL_FAT_SUPPORT
  89 #define CONFIG_SPL_MMC_SUPPORT
  90 #include "imx6_spl.h"                   /* common IMX6 SPL configuration */
  91
  92 /* Ethernet Configuration */
  93 #ifdef CONFIG_CMD_NET
  94 #define CONFIG_FEC_MXC
  95 #define CONFIG_MII
  96 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  97 #define CONFIG_FEC_XCV_TYPE             RGMII
  98 #define CONFIG_ETHPRIME                 "FEC"
  99 #define CONFIG_FEC_MXC_PHYADDR          0x7
 100 #define CONFIG_PHYLIB
 101 #define CONFIG_PHY_MICREL
 102 #define CONFIG_PHY_MICREL_KSZ9021
 103 #define CONFIG_ARP_TIMEOUT              200UL
 104 #endif
 105
 106 /* I2C */
 107 #define CONFIG_SYS_I2C
 108 #define CONFIG_SYS_I2C_MXC
 109 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 110 #define CONFIG_I2C_MULTI_BUS
 111 #define CONFIG_I2C_MXC
 112 #define CONFIG_SYS_I2C_SPEED            100000
 113
 114 /* I2C EEPROM */
 115 #ifdef CONFIG_CMD_EEPROM
 116 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2
 117 #define CONFIG_SYS_SPD_BUS_NUM          2
 118 #endif
 119
 120 /* MMC Configs */
 121 #ifdef CONFIG_CMD_MMC
 122 #define CONFIG_MMC
 123 #define CONFIG_GENERIC_MMC
 124 #define CONFIG_BOUNCE_BUFFER
 125 #define CONFIG_FSL_ESDHC
 126 #define CONFIG_FSL_USDHC
 127 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
 128 #define CONFIG_SYS_FSL_USDHC_NUM        2
 129 #endif
 130
 131 /* OCOTP Configs */
 132 #ifdef CONFIG_CMD_FUSE
 133 #define CONFIG_MXC_OCOTP
 134 #endif
 135
 136 /* PCI express */
 137 #ifdef CONFIG_CMD_PCI
 138 #define CONFIG_PCI
 139 #define CONFIG_PCI_PNP
 140 #define CONFIG_PCI_SCAN_SHOW
 141 #define CONFIG_PCIE_IMX
 142 #define CONFIG_PCIE_IMX_PERST_GPIO      IMX_GPIO_NR(3, 29)
 143 #define CONFIG_PCIE_IMX_POWER_GPIO      IMX_GPIO_NR(7, 12)
 144 #endif
 145
 146 /* PMIC */
 147 #define CONFIG_POWER
 148 #define CONFIG_POWER_I2C
 149 #define CONFIG_POWER_PFUZE100
 150 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
 151
 152 /* SATA Configs */
 153 #ifdef CONFIG_CMD_SATA
 154 #define CONFIG_DWC_AHSATA
 155 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 156 #define CONFIG_DWC_AHSATA_PORT_ID       0
 157 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
 158 #define CONFIG_LBA48
 159 #define CONFIG_LIBATA
 160 #endif
 161
 162 /* UART */
 163 #define CONFIG_MXC_UART
 164 #define CONFIG_MXC_UART_BASE            UART2_BASE
 165
 166 /* USB Configs */
 167 #ifdef CONFIG_CMD_USB
 168 #define CONFIG_USB_EHCI
 169 #define CONFIG_USB_EHCI_MX6
 170 #define CONFIG_USB_STORAGE
 171 #define CONFIG_USB_KEYBOARD
 172 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
 173 #define CONFIG_USB_HOST_ETHER
 174 #define CONFIG_USB_ETHER_ASIX
 175 #define CONFIG_USB_ETHER_SMSC95XX
 176 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 177 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
 178 #define CONFIG_MXC_USB_FLAGS            0
 179 /* Gadget part */
 180 #define CONFIG_CI_UDC
 181 #define CONFIG_USBD_HS
 182 #define CONFIG_USB_GADGET_DUALSPEED
 183 #define CONFIG_USB_ETHER
 184 #define CONFIG_USB_ETH_CDC
 185 #define CONFIG_NETCONSOLE
 186 #endif
 187
 188 /* Video output */
 189 #ifdef CONFIG_VIDEO
 190 #define CONFIG_VIDEO_IPUV3
 191 #define CONFIG_CFB_CONSOLE
 192 #define CONFIG_VGA_AS_SINGLE_DEVICE
 193 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 194 #define CONFIG_VIDEO_BMP_RLE8
 195 #define CONFIG_SPLASH_SCREEN
 196 #define CONFIG_BMP_16BPP
 197 #define CONFIG_VIDEO_LOGO
 198 #define CONFIG_IPUV3_CLK                260000000
 199 #define CONFIG_CMD_HDMIDETECT
 200 #define CONFIG_CONSOLE_MUX
 201 #define CONFIG_IMX_HDMI
 202 #define CONFIG_IMX_VIDEO_SKIP
 203 #endif
 204
 205 /* Extra U-Boot environment. */
 206 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 207         "fdt_high=0xffffffff\0"                                         \
 208         "initrd_high=0xffffffff\0"                                      \
 209         "consdev=ttymxc1\0"                                             \
 210         "baudrate=115200\0"                                             \
 211         "bootdev=/dev/mmcblk0p1\0"                                      \
 212         "rootdev=/dev/mmcblk0p2\0"                                      \
 213         "netdev=eth0\0"                                                 \
 214         "kernel_addr_r=0x18000000\0"                                    \
 215         "addcons="                                                      \
 216                 "setenv bootargs ${bootargs} "                          \
 217                 "console=${consdev},${baudrate}\0"                      \
 218         "addip="                                                        \
 219                 "setenv bootargs ${bootargs} "                          \
 220                 "ip=${ipaddr}:${serverip}:${gatewayip}:"                \
 221                         "${netmask}:${hostname}:${netdev}:off\0"        \
 222         "addmisc="                                                      \
 223                 "setenv bootargs ${bootargs} ${miscargs}\0"             \
 224         "addargs=run addcons addmisc\0"                                 \
 225         "mmcload="                                                      \
 226                 "mmc rescan ; "                                         \
 227                 "ext4load mmc 0:1 ${kernel_addr_r} ${bootfile}\0"       \
 228         "netload="                                                      \
 229                 "tftp ${kernel_addr_r} ${hostname}/${bootfile}\0"       \
 230         "miscargs=nohlt panic=1\0"                                      \
 231         "mmcargs=setenv bootargs root=${rootdev} rw rootwait\0"         \
 232         "nfsargs="                                                      \
 233                 "setenv bootargs root=/dev/nfs rw "                     \
 234                         "nfsroot=${serverip}:${rootpath},v3,tcp\0"      \
 235         "mmc_mmc="                                                      \
 236                 "run mmcload mmcargs addargs ; "                        \
 237                 "bootm ${kernel_addr_r}\0"                              \
 238         "mmc_nfs="                                                      \
 239                 "run mmcload nfsargs addip addargs ; "                  \
 240                 "bootm ${kernel_addr_r}\0"                              \
 241         "net_mmc="                                                      \
 242                 "run netload mmcargs addargs ; "                        \
 243                 "bootm ${kernel_addr_r}\0"                              \
 244         "net_nfs="                                                      \
 245                 "run netload nfsargs addip addargs ; "                  \
 246                 "bootm ${kernel_addr_r}\0"                              \
 247         "update_sd_spl_filename=SPL\0"                                  \
 248         "update_sd_uboot_filename=u-boot.img\0"                         \
 249         "update_sd_firmware="   /* Update the SD firmware partition */  \
 250                 "if mmc rescan ; then "                                 \
 251                 "if dhcp ${update_sd_spl_filename} ; then "             \
 252                 "mmc write ${loadaddr} 2 0x200 ; "                      \
 253                 "fi ; "                                                 \
 254                 "if dhcp ${update_sd_uboot_filename} ; then "           \
 255                 "fatwrite mmc 0:1 ${loadaddr} u-boot.img ${filesize} ; "\
 256                 "fi ; "                                                 \
 257                 "fi\0"                                                  \
 258
 259 #endif                          /* __CONFIG_H */