Move PHY_MICREL and PHY_MICREL_KSZ90X1 to Kconfig
[platform/kernel/u-boot.git] / include / configs / nitrogen6x.h
1 /*
2  * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
3  *
4  * Configuration settings for the Boundary Devices Nitrogen6X
5  * and Freescale i.MX6Q Sabre Lite boards.
6  *
7  * SPDX-License-Identifier:     GPL-2.0+
8  */
9
10 #ifndef __CONFIG_H
11 #define __CONFIG_H
12
13 #include "mx6_common.h"
14
15 #define CONFIG_MACH_TYPE        3769
16
17 /* Size of malloc() pool */
18 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
19
20 #define CONFIG_MISC_INIT_R
21 #define CONFIG_USBD_HS
22 #define CONFIG_USB_ETHER
23 #define CONFIG_USB_ETH_CDC
24 #define CONFIG_NETCONSOLE
25
26 #define CONFIG_MXC_UART
27 #define CONFIG_MXC_UART_BASE           UART2_BASE
28
29 #ifdef CONFIG_CMD_SF
30 #define CONFIG_MXC_SPI
31 #define CONFIG_SF_DEFAULT_BUS  0
32 #define CONFIG_SF_DEFAULT_CS   0
33 #define CONFIG_SF_DEFAULT_SPEED 25000000
34 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
35 #endif
36
37 /* I2C Configs */
38 #define CONFIG_SYS_I2C
39 #define CONFIG_SYS_I2C_MXC
40 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
41 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
42 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
43 #define CONFIG_SYS_I2C_SPEED            100000
44 #define CONFIG_I2C_EDID
45
46 /* MMC Configs */
47 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
48 #define CONFIG_SYS_FSL_USDHC_NUM       2
49
50 /*
51  * SATA Configs
52  */
53 #ifdef CONFIG_CMD_SATA
54 #define CONFIG_DWC_AHSATA
55 #define CONFIG_SYS_SATA_MAX_DEVICE      1
56 #define CONFIG_DWC_AHSATA_PORT_ID       0
57 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
58 #define CONFIG_LBA48
59 #define CONFIG_LIBATA
60 #endif
61
62 #define CONFIG_FEC_MXC
63 #define CONFIG_MII
64 #define IMX_FEC_BASE                    ENET_BASE_ADDR
65 #define CONFIG_FEC_XCV_TYPE             RGMII
66 #define CONFIG_ETHPRIME                 "FEC"
67 #define CONFIG_FEC_MXC_PHYADDR          6
68
69 /* USB Configs */
70 #define CONFIG_USB_HOST_ETHER
71 #define CONFIG_USB_ETHER_ASIX
72 #define CONFIG_USB_ETHER_MCS7830
73 #define CONFIG_USB_ETHER_SMSC95XX
74 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
75 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET        /* For OTG port */
76 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
77 #define CONFIG_MXC_USB_FLAGS    0
78 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
79
80 /* Framebuffer and LCD */
81 #define CONFIG_VIDEO_IPUV3
82 #define CONFIG_VIDEO_BMP_RLE8
83 #define CONFIG_SPLASH_SCREEN
84 #define CONFIG_SPLASH_SCREEN_ALIGN
85 #define CONFIG_VIDEO_BMP_GZIP
86 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (6 * 1024 * 1024)
87 #define CONFIG_BMP_16BPP
88 #define CONFIG_IPUV3_CLK 260000000
89 #define CONFIG_IMX_HDMI
90 #define CONFIG_IMX_VIDEO_SKIP
91
92 #define CONFIG_PREBOOT                 ""
93
94 #ifdef CONFIG_CMD_SATA
95 #define CONFIG_DRIVE_SATA "sata "
96 #else
97 #define CONFIG_DRIVE_SATA
98 #endif
99
100 #ifdef CONFIG_CMD_MMC
101 #define CONFIG_DRIVE_MMC "mmc "
102 #else
103 #define CONFIG_DRIVE_MMC
104 #endif
105
106 #ifdef CONFIG_USB_STORAGE
107 #define CONFIG_DRIVE_USB "usb "
108 #else
109 #define CONFIG_DRIVE_USB
110 #endif
111
112 #define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC CONFIG_DRIVE_USB
113 #define CONFIG_UMSDEVS CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC
114
115 #if defined(CONFIG_SABRELITE)
116 #define CONFIG_EXTRA_ENV_SETTINGS \
117         "script=boot.scr\0" \
118         "uimage=uImage\0" \
119         "console=ttymxc1\0" \
120         "fdt_high=0xffffffff\0" \
121         "initrd_high=0xffffffff\0" \
122         "fdt_file=imx6q-sabrelite.dtb\0" \
123         "fdt_addr=0x18000000\0" \
124         "boot_fdt=try\0" \
125         "ip_dyn=yes\0" \
126         "usb_pgood_delay=2000\0" \
127         "mmcdevs=0 1\0" \
128         "mmcpart=1\0" \
129         "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
130         "mmcargs=setenv bootargs console=${console},${baudrate} " \
131                 "root=${mmcroot}\0" \
132         "loadbootscript=" \
133                 "load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
134         "bootscript=echo Running bootscript from mmc ...; " \
135                 "source\0" \
136         "loaduimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
137         "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
138         "mmcboot=echo Booting from mmc ...; " \
139                 "run mmcargs; " \
140                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
141                         "if run loadfdt; then " \
142                                 "bootm ${loadaddr} - ${fdt_addr}; " \
143                         "else " \
144                                 "if test ${boot_fdt} = try; then " \
145                                         "bootm; " \
146                                 "else " \
147                                         "echo WARN: Cannot load the DT; " \
148                                 "fi; " \
149                         "fi; " \
150                 "else " \
151                         "bootm; " \
152                 "fi;\0" \
153         "netargs=setenv bootargs console=${console},${baudrate} " \
154                 "root=/dev/nfs " \
155         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
156                 "netboot=echo Booting from net ...; " \
157                 "run netargs; " \
158                 "if test ${ip_dyn} = yes; then " \
159                         "setenv get_cmd dhcp; " \
160                 "else " \
161                         "setenv get_cmd tftp; " \
162                 "fi; " \
163                 "${get_cmd} ${uimage}; " \
164                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
165                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
166                                 "bootm ${loadaddr} - ${fdt_addr}; " \
167                         "else " \
168                                 "if test ${boot_fdt} = try; then " \
169                                         "bootm; " \
170                                 "else " \
171                                         "echo WARN: Cannot load the DT; " \
172                                 "fi; " \
173                         "fi; " \
174                 "else " \
175                         "bootm; " \
176                 "fi;\0"
177
178 #define CONFIG_BOOTCOMMAND \
179         "for mmcdev in ${mmcdevs}; do " \
180                 "mmc dev ${mmcdev}; " \
181                 "if mmc rescan; then " \
182                         "if run loadbootscript; then " \
183                                 "run bootscript; " \
184                         "else " \
185                                 "if run loaduimage; then " \
186                                         "run mmcboot; " \
187                                 "fi; " \
188                         "fi; " \
189                 "fi; " \
190         "done; " \
191         "run netboot; "
192 #else
193 #define CONFIG_EXTRA_ENV_SETTINGS \
194         "bootdevs=" CONFIG_DRIVE_TYPES "\0" \
195         "umsdevs=" CONFIG_UMSDEVS "\0" \
196         "usb_pgood_delay=2000\0" \
197         "console=ttymxc1\0" \
198         "clearenv=if sf probe || sf probe || sf probe 1 ; then " \
199                 "sf erase 0xc0000 0x2000 && " \
200                 "echo restored environment to factory default ; fi\0" \
201         "bootcmd=for dtype in ${bootdevs}" \
202                 "; do " \
203                         "if itest.s \"xusb\" == \"x${dtype}\" ; then " \
204                                 "usb start ;" \
205                         "fi; " \
206                         "for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
207                                 "load " \
208                                         "${dtype} ${disk}:1 " \
209                                         "10008000 " \
210                                         "/6x_bootscript" \
211                                         "&& source 10008000 ; " \
212                         "done ; " \
213                 "done; " \
214                 "setenv stdout serial,vga ; " \
215                 "echo ; echo 6x_bootscript not found ; " \
216                 "echo ; echo serial console at 115200, 8N1 ; echo ; " \
217                 "echo details at http://boundarydevices.com/6q_bootscript ; " \
218                 "setenv stdout serial;" \
219                 "setenv stdin serial,usbkbd;" \
220                 "for dtype in ${umsdevs} ; do " \
221                         "if itest.s sata == ${dtype}; then " \
222                                 "initcmd='sata init' ;" \
223                         "else " \
224                                 "initcmd='mmc rescan' ;" \
225                         "fi; " \
226                         "for disk in 0 1 ; do " \
227                                 "if $initcmd && $dtype dev $disk ; then " \
228                                         "setenv stdout serial,vga; " \
229                                         "echo expose ${dtype} ${disk} " \
230                                                 "over USB; " \
231                                         "ums 0 $dtype $disk ;" \
232                                 "fi; " \
233                 "       done; " \
234                 "done ;" \
235                 "setenv stdout serial,vga; " \
236                 "echo no block devices found;" \
237                 "\0" \
238         "initrd_high=0xffffffff\0" \
239         "upgradeu=for dtype in ${bootdevs}" \
240                 "; do " \
241                 "for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
242                         "load ${dtype} ${disk}:1 10008000 " \
243                                 "/6x_upgrade " \
244                                 "&& source 10008000 ; " \
245                 "done ; " \
246         "done\0" \
247
248 #endif
249 /* Miscellaneous configurable options */
250 #define CONFIG_SYS_MEMTEST_START       0x10000000
251 #define CONFIG_SYS_MEMTEST_END         0x10010000
252 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
253
254 /* Physical Memory Map */
255 #define CONFIG_NR_DRAM_BANKS           1
256 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
257
258 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
259 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
260 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
261
262 #define CONFIG_SYS_INIT_SP_OFFSET \
263         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
264 #define CONFIG_SYS_INIT_SP_ADDR \
265         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
266
267 /* Environment organization */
268 #define CONFIG_ENV_SIZE                 (8 * 1024)
269
270 #if defined(CONFIG_ENV_IS_IN_MMC)
271 #define CONFIG_ENV_OFFSET               (6 * 64 * 1024)
272 #define CONFIG_SYS_MMC_ENV_DEV          0
273 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
274 #define CONFIG_ENV_OFFSET               (768 * 1024)
275 #define CONFIG_ENV_SECT_SIZE            (8 * 1024)
276 #define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
277 #define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
278 #define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
279 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
280 #endif
281
282 #define CONFIG_SYS_ALT_MEMTEST
283
284 /*
285  * PCI express
286  */
287 #ifdef CONFIG_CMD_PCI
288 #define CONFIG_PCI_SCAN_SHOW
289 #define CONFIG_PCIE_IMX
290 #endif
291
292 #define CONFIG_USB_FUNCTION_MASS_STORAGE
293
294 #define CONFIG_USB_FUNCTION_FASTBOOT
295 #define CONFIG_CMD_FASTBOOT
296 #define CONFIG_ANDROID_BOOT_IMAGE
297 #define CONFIG_FASTBOOT_BUF_ADDR   CONFIG_SYS_LOAD_ADDR
298 #define CONFIG_FASTBOOT_BUF_SIZE   0x07000000
299
300 #endif         /* __CONFIG_H */