include/configs/nitrogen6x.h

   1 /*
   2  * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Boundary Devices Nitrogen6X
   5  * and Freescale i.MX6Q Sabre Lite boards.
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #include "mx6_common.h"
  14
  15 #define CONFIG_MACH_TYPE        3769
  16
  17 /* Size of malloc() pool */
  18 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
  19
  20 #define CONFIG_BOARD_EARLY_INIT_F
  21 #define CONFIG_MISC_INIT_R
  22 #define CONFIG_CI_UDC
  23 #define CONFIG_USBD_HS
  24 #define CONFIG_USB_GADGET_DUALSPEED
  25 #define CONFIG_USB_ETHER
  26 #define CONFIG_USB_ETH_CDC
  27 #define CONFIG_NETCONSOLE
  28
  29 #define CONFIG_CMD_FUSE
  30 #ifdef CONFIG_CMD_FUSE
  31 #define CONFIG_MXC_OCOTP
  32 #endif
  33
  34 #define CONFIG_MXC_UART
  35 #define CONFIG_MXC_UART_BASE           UART2_BASE
  36
  37 #define CONFIG_CMD_SF
  38 #ifdef CONFIG_CMD_SF
  39 #define CONFIG_SPI_FLASH
  40 #define CONFIG_SPI_FLASH_SST
  41 #define CONFIG_MXC_SPI
  42 #define CONFIG_SF_DEFAULT_BUS  0
  43 #define CONFIG_SF_DEFAULT_CS   0
  44 #define CONFIG_SF_DEFAULT_SPEED 25000000
  45 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
  46 #endif
  47
  48 /* I2C Configs */
  49 #define CONFIG_CMD_I2C
  50 #define CONFIG_SYS_I2C
  51 #define CONFIG_SYS_I2C_MXC
  52 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  53 #define CONFIG_SYS_I2C_SPEED            100000
  54 #define CONFIG_I2C_EDID
  55
  56 /* MMC Configs */
  57 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  58 #define CONFIG_SYS_FSL_USDHC_NUM       2
  59
  60 #ifdef CONFIG_MX6Q
  61 #define CONFIG_CMD_SATA
  62 #endif
  63
  64 /*
  65  * SATA Configs
  66  */
  67 #ifdef CONFIG_CMD_SATA
  68 #define CONFIG_DWC_AHSATA
  69 #define CONFIG_SYS_SATA_MAX_DEVICE      1
  70 #define CONFIG_DWC_AHSATA_PORT_ID       0
  71 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  72 #define CONFIG_LBA48
  73 #define CONFIG_LIBATA
  74 #endif
  75
  76 #define CONFIG_CMD_PING
  77 #define CONFIG_CMD_DHCP
  78 #define CONFIG_CMD_MII
  79 #define CONFIG_CMD_NET
  80 #define CONFIG_FEC_MXC
  81 #define CONFIG_MII
  82 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  83 #define CONFIG_FEC_XCV_TYPE             RGMII
  84 #define CONFIG_ETHPRIME                 "FEC"
  85 #define CONFIG_FEC_MXC_PHYADDR          6
  86 #define CONFIG_PHYLIB
  87 #define CONFIG_PHY_MICREL
  88 #define CONFIG_PHY_MICREL_KSZ9021
  89
  90 /* USB Configs */
  91 #define CONFIG_CMD_USB
  92 #define CONFIG_USB_EHCI
  93 #define CONFIG_USB_EHCI_MX6
  94 #define CONFIG_USB_STORAGE
  95 #define CONFIG_USB_HOST_ETHER
  96 #define CONFIG_USB_ETHER_ASIX
  97 #define CONFIG_USB_ETHER_MCS7830
  98 #define CONFIG_USB_ETHER_SMSC95XX
  99 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 100 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET        /* For OTG port */
 101 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
 102 #define CONFIG_MXC_USB_FLAGS    0
 103 #define CONFIG_USB_KEYBOARD
 104 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
 105
 106 /* Miscellaneous commands */
 107 #define CONFIG_CMD_BMODE
 108
 109 /* Framebuffer and LCD */
 110 #define CONFIG_VIDEO
 111 #define CONFIG_VIDEO_IPUV3
 112 #define CONFIG_CFB_CONSOLE
 113 #define CONFIG_VGA_AS_SINGLE_DEVICE
 114 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 115 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 116 #define CONFIG_VIDEO_BMP_RLE8
 117 #define CONFIG_SPLASH_SCREEN
 118 #define CONFIG_SPLASH_SCREEN_ALIGN
 119 #define CONFIG_VIDEO_BMP_GZIP
 120 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (6 * 1024 * 1024)
 121 #define CONFIG_BMP_16BPP
 122 #define CONFIG_IPUV3_CLK 260000000
 123 #define CONFIG_CMD_HDMIDETECT
 124 #define CONFIG_CONSOLE_MUX
 125 #define CONFIG_IMX_HDMI
 126 #define CONFIG_IMX_VIDEO_SKIP
 127
 128 #define CONFIG_PREBOOT                 ""
 129
 130 #ifdef CONFIG_CMD_SATA
 131 #define CONFIG_DRIVE_SATA "sata "
 132 #else
 133 #define CONFIG_DRIVE_SATA
 134 #endif
 135
 136 #ifdef CONFIG_CMD_MMC
 137 #define CONFIG_DRIVE_MMC "mmc "
 138 #else
 139 #define CONFIG_DRIVE_MMC
 140 #endif
 141
 142 #ifdef CONFIG_USB_STORAGE
 143 #define CONFIG_DRIVE_USB "usb "
 144 #else
 145 #define CONFIG_DRIVE_USB
 146 #endif
 147
 148 #define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC CONFIG_DRIVE_USB
 149 #define CONFIG_UMSDEVS CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC
 150
 151 #if defined(CONFIG_SABRELITE)
 152 #define CONFIG_EXTRA_ENV_SETTINGS \
 153         "script=boot.scr\0" \
 154         "uimage=uImage\0" \
 155         "console=ttymxc1\0" \
 156         "fdt_high=0xffffffff\0" \
 157         "initrd_high=0xffffffff\0" \
 158         "fdt_file=imx6q-sabrelite.dtb\0" \
 159         "fdt_addr=0x18000000\0" \
 160         "boot_fdt=try\0" \
 161         "ip_dyn=yes\0" \
 162         "mmcdevs=0 1\0" \
 163         "mmcpart=1\0" \
 164         "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
 165         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 166                 "root=${mmcroot}\0" \
 167         "loadbootscript=" \
 168                 "load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 169         "bootscript=echo Running bootscript from mmc ...; " \
 170                 "source\0" \
 171         "loaduimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
 172         "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 173         "mmcboot=echo Booting from mmc ...; " \
 174                 "run mmcargs; " \
 175                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 176                         "if run loadfdt; then " \
 177                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 178                         "else " \
 179                                 "if test ${boot_fdt} = try; then " \
 180                                         "bootm; " \
 181                                 "else " \
 182                                         "echo WARN: Cannot load the DT; " \
 183                                 "fi; " \
 184                         "fi; " \
 185                 "else " \
 186                         "bootm; " \
 187                 "fi;\0" \
 188         "netargs=setenv bootargs console=${console},${baudrate} " \
 189                 "root=/dev/nfs " \
 190         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 191                 "netboot=echo Booting from net ...; " \
 192                 "run netargs; " \
 193                 "if test ${ip_dyn} = yes; then " \
 194                         "setenv get_cmd dhcp; " \
 195                 "else " \
 196                         "setenv get_cmd tftp; " \
 197                 "fi; " \
 198                 "${get_cmd} ${uimage}; " \
 199                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 200                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 201                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 202                         "else " \
 203                                 "if test ${boot_fdt} = try; then " \
 204                                         "bootm; " \
 205                                 "else " \
 206                                         "echo WARN: Cannot load the DT; " \
 207                                 "fi; " \
 208                         "fi; " \
 209                 "else " \
 210                         "bootm; " \
 211                 "fi;\0"
 212
 213 #define CONFIG_BOOTCOMMAND \
 214         "for mmcdev in ${mmcdevs}; do " \
 215                 "mmc dev ${mmcdev}; " \
 216                 "if mmc rescan; then " \
 217                         "if run loadbootscript; then " \
 218                                 "run bootscript; " \
 219                         "else " \
 220                                 "if run loaduimage; then " \
 221                                         "run mmcboot; " \
 222                                 "fi; " \
 223                         "fi; " \
 224                 "fi; " \
 225         "done; " \
 226         "run netboot; "
 227 #else
 228 #define CONFIG_EXTRA_ENV_SETTINGS \
 229         "bootdevs=" CONFIG_DRIVE_TYPES "\0" \
 230         "umsdevs=" CONFIG_UMSDEVS "\0" \
 231         "console=ttymxc1\0" \
 232         "clearenv=if sf probe || sf probe || sf probe 1 ; then " \
 233                 "sf erase 0xc0000 0x2000 && " \
 234                 "echo restored environment to factory default ; fi\0" \
 235         "bootcmd=for dtype in ${bootdevs}" \
 236                 "; do " \
 237                         "if itest.s \"xusb\" == \"x${dtype}\" ; then " \
 238                                 "usb start ;" \
 239                         "fi; " \
 240                         "for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
 241                                 "load " \
 242                                         "${dtype} ${disk}:1 " \
 243                                         "10008000 " \
 244                                         "/6x_bootscript" \
 245                                         "&& source 10008000 ; " \
 246                         "done ; " \
 247                 "done; " \
 248                 "setenv stdout serial,vga ; " \
 249                 "echo ; echo 6x_bootscript not found ; " \
 250                 "echo ; echo serial console at 115200, 8N1 ; echo ; " \
 251                 "echo details at http://boundarydevices.com/6q_bootscript ; " \
 252                 "setenv stdout serial;" \
 253                 "setenv stdin serial,usbkbd;" \
 254                 "for dtype in ${umsdevs} ; do " \
 255                         "if itest.s sata == ${dtype}; then " \
 256                                 "initcmd='sata init' ;" \
 257                         "else " \
 258                                 "initcmd='mmc rescan' ;" \
 259                         "fi; " \
 260                         "for disk in 0 1 ; do " \
 261                                 "if $initcmd && $dtype dev $disk ; then " \
 262                                         "setenv stdout serial,vga; " \
 263                                         "echo expose ${dtype} ${disk} " \
 264                                                 "over USB; " \
 265                                         "ums 0 $dtype $disk ;" \
 266                                 "fi; " \
 267                 "       done; " \
 268                 "done ;" \
 269                 "setenv stdout serial,vga; " \
 270                 "echo no block devices found;" \
 271                 "\0" \
 272         "initrd_high=0xffffffff\0" \
 273         "upgradeu=for dtype in ${bootdevs}" \
 274                 "; do " \
 275                 "for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
 276                         "load ${dtype} ${disk}:1 10008000 " \
 277                                 "/6x_upgrade " \
 278                                 "&& source 10008000 ; " \
 279                 "done ; " \
 280         "done\0" \
 281
 282 #endif
 283 /* Miscellaneous configurable options */
 284 #define CONFIG_SYS_MEMTEST_START       0x10000000
 285 #define CONFIG_SYS_MEMTEST_END         0x10010000
 286 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 287
 288 /* Physical Memory Map */
 289 #define CONFIG_NR_DRAM_BANKS           1
 290 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 291
 292 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 293 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 294 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 295
 296 #define CONFIG_SYS_INIT_SP_OFFSET \
 297         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 298 #define CONFIG_SYS_INIT_SP_ADDR \
 299         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 300
 301 /* Environment organization */
 302 #define CONFIG_ENV_SIZE                 (8 * 1024)
 303
 304 #if defined(CONFIG_SABRELITE)
 305 #define CONFIG_ENV_IS_IN_MMC
 306 #else
 307 #define CONFIG_ENV_IS_IN_SPI_FLASH
 308 #endif
 309
 310 #if defined(CONFIG_ENV_IS_IN_MMC)
 311 #define CONFIG_ENV_OFFSET               (6 * 64 * 1024)
 312 #define CONFIG_SYS_MMC_ENV_DEV          0
 313 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
 314 #define CONFIG_ENV_OFFSET               (768 * 1024)
 315 #define CONFIG_ENV_SECT_SIZE            (8 * 1024)
 316 #define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
 317 #define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
 318 #define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
 319 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
 320 #endif
 321
 322 #define CONFIG_CMD_BMP
 323
 324 #define CONFIG_CMD_TIME
 325 #define CONFIG_CMD_MEMTEST
 326 #define CONFIG_SYS_ALT_MEMTEST
 327
 328 /*
 329  * PCI express
 330  */
 331 #ifdef CONFIG_CMD_PCI
 332 #define CONFIG_PCI
 333 #define CONFIG_PCI_PNP
 334 #define CONFIG_PCI_SCAN_SHOW
 335 #define CONFIG_PCIE_IMX
 336 #endif
 337
 338 #define CONFIG_CMD_ELF
 339
 340 #define CONFIG_USB_GADGET
 341 #define CONFIG_CMD_USB_MASS_STORAGE
 342 #define CONFIG_USB_GADGET_MASS_STORAGE
 343 #define CONFIG_USBDOWNLOAD_GADGET
 344 #define CONFIG_USB_GADGET_VBUS_DRAW     2
 345
 346 /* Netchip IDs */
 347 #define CONFIG_G_DNL_VENDOR_NUM 0x0525
 348 #define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
 349 #define CONFIG_G_DNL_MANUFACTURER "Boundary"
 350
 351 #define CONFIG_CMD_FASTBOOT
 352 #define CONFIG_ANDROID_BOOT_IMAGE
 353 #define CONFIG_USB_FASTBOOT_BUF_ADDR   CONFIG_SYS_LOAD_ADDR
 354 #define CONFIG_USB_FASTBOOT_BUF_SIZE   0x07000000
 355
 356 #endif         /* __CONFIG_H */