Merge git://git.denx.de/u-boot-fdt
[platform/kernel/u-boot.git] / include / configs / nitrogen6x.h
1 /*
2  * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
3  *
4  * Configuration settings for the Boundary Devices Nitrogen6X
5  * and Freescale i.MX6Q Sabre Lite boards.
6  *
7  * SPDX-License-Identifier:     GPL-2.0+
8  */
9
10 #ifndef __CONFIG_H
11 #define __CONFIG_H
12
13 #include "mx6_common.h"
14
15 #define CONFIG_MACH_TYPE        3769
16
17 /* Size of malloc() pool */
18 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
19
20 #define CONFIG_BOARD_EARLY_INIT_F
21 #define CONFIG_MISC_INIT_R
22 #define CONFIG_USBD_HS
23 #define CONFIG_USB_ETHER
24 #define CONFIG_USB_ETH_CDC
25 #define CONFIG_NETCONSOLE
26
27 #define CONFIG_MXC_UART
28 #define CONFIG_MXC_UART_BASE           UART2_BASE
29
30 #ifdef CONFIG_CMD_SF
31 #define CONFIG_MXC_SPI
32 #define CONFIG_SF_DEFAULT_BUS  0
33 #define CONFIG_SF_DEFAULT_CS   0
34 #define CONFIG_SF_DEFAULT_SPEED 25000000
35 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
36 #endif
37
38 /* I2C Configs */
39 #define CONFIG_SYS_I2C
40 #define CONFIG_SYS_I2C_MXC
41 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
42 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
43 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
44 #define CONFIG_SYS_I2C_SPEED            100000
45 #define CONFIG_I2C_EDID
46
47 /* MMC Configs */
48 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
49 #define CONFIG_SYS_FSL_USDHC_NUM       2
50
51 #ifdef CONFIG_MX6Q
52 #define CONFIG_CMD_SATA
53 #endif
54
55 /*
56  * SATA Configs
57  */
58 #ifdef CONFIG_CMD_SATA
59 #define CONFIG_DWC_AHSATA
60 #define CONFIG_SYS_SATA_MAX_DEVICE      1
61 #define CONFIG_DWC_AHSATA_PORT_ID       0
62 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
63 #define CONFIG_LBA48
64 #define CONFIG_LIBATA
65 #endif
66
67 #define CONFIG_FEC_MXC
68 #define CONFIG_MII
69 #define IMX_FEC_BASE                    ENET_BASE_ADDR
70 #define CONFIG_FEC_XCV_TYPE             RGMII
71 #define CONFIG_ETHPRIME                 "FEC"
72 #define CONFIG_FEC_MXC_PHYADDR          6
73 #define CONFIG_PHYLIB
74 #define CONFIG_PHY_MICREL
75 #define CONFIG_PHY_MICREL_KSZ9021
76
77 /* USB Configs */
78 #define CONFIG_USB_EHCI
79 #define CONFIG_USB_EHCI_MX6
80 #define CONFIG_USB_HOST_ETHER
81 #define CONFIG_USB_ETHER_ASIX
82 #define CONFIG_USB_ETHER_MCS7830
83 #define CONFIG_USB_ETHER_SMSC95XX
84 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
85 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET        /* For OTG port */
86 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
87 #define CONFIG_MXC_USB_FLAGS    0
88 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
89
90 /* Miscellaneous commands */
91 #define CONFIG_CMD_BMODE
92
93 /* Framebuffer and LCD */
94 #define CONFIG_VIDEO_IPUV3
95 #define CONFIG_VIDEO_BMP_RLE8
96 #define CONFIG_SPLASH_SCREEN
97 #define CONFIG_SPLASH_SCREEN_ALIGN
98 #define CONFIG_VIDEO_BMP_GZIP
99 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (6 * 1024 * 1024)
100 #define CONFIG_BMP_16BPP
101 #define CONFIG_IPUV3_CLK 260000000
102 #define CONFIG_CMD_HDMIDETECT
103 #define CONFIG_IMX_HDMI
104 #define CONFIG_IMX_VIDEO_SKIP
105
106 #define CONFIG_PREBOOT                 ""
107
108 #ifdef CONFIG_CMD_SATA
109 #define CONFIG_DRIVE_SATA "sata "
110 #else
111 #define CONFIG_DRIVE_SATA
112 #endif
113
114 #ifdef CONFIG_CMD_MMC
115 #define CONFIG_DRIVE_MMC "mmc "
116 #else
117 #define CONFIG_DRIVE_MMC
118 #endif
119
120 #ifdef CONFIG_USB_STORAGE
121 #define CONFIG_DRIVE_USB "usb "
122 #else
123 #define CONFIG_DRIVE_USB
124 #endif
125
126 #define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC CONFIG_DRIVE_USB
127 #define CONFIG_UMSDEVS CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC
128
129 #if defined(CONFIG_SABRELITE)
130 #define CONFIG_EXTRA_ENV_SETTINGS \
131         "script=boot.scr\0" \
132         "uimage=uImage\0" \
133         "console=ttymxc1\0" \
134         "fdt_high=0xffffffff\0" \
135         "initrd_high=0xffffffff\0" \
136         "fdt_file=imx6q-sabrelite.dtb\0" \
137         "fdt_addr=0x18000000\0" \
138         "boot_fdt=try\0" \
139         "ip_dyn=yes\0" \
140         "mmcdevs=0 1\0" \
141         "mmcpart=1\0" \
142         "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
143         "mmcargs=setenv bootargs console=${console},${baudrate} " \
144                 "root=${mmcroot}\0" \
145         "loadbootscript=" \
146                 "load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
147         "bootscript=echo Running bootscript from mmc ...; " \
148                 "source\0" \
149         "loaduimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
150         "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
151         "mmcboot=echo Booting from mmc ...; " \
152                 "run mmcargs; " \
153                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
154                         "if run loadfdt; then " \
155                                 "bootm ${loadaddr} - ${fdt_addr}; " \
156                         "else " \
157                                 "if test ${boot_fdt} = try; then " \
158                                         "bootm; " \
159                                 "else " \
160                                         "echo WARN: Cannot load the DT; " \
161                                 "fi; " \
162                         "fi; " \
163                 "else " \
164                         "bootm; " \
165                 "fi;\0" \
166         "netargs=setenv bootargs console=${console},${baudrate} " \
167                 "root=/dev/nfs " \
168         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
169                 "netboot=echo Booting from net ...; " \
170                 "run netargs; " \
171                 "if test ${ip_dyn} = yes; then " \
172                         "setenv get_cmd dhcp; " \
173                 "else " \
174                         "setenv get_cmd tftp; " \
175                 "fi; " \
176                 "${get_cmd} ${uimage}; " \
177                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
178                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
179                                 "bootm ${loadaddr} - ${fdt_addr}; " \
180                         "else " \
181                                 "if test ${boot_fdt} = try; then " \
182                                         "bootm; " \
183                                 "else " \
184                                         "echo WARN: Cannot load the DT; " \
185                                 "fi; " \
186                         "fi; " \
187                 "else " \
188                         "bootm; " \
189                 "fi;\0"
190
191 #define CONFIG_BOOTCOMMAND \
192         "for mmcdev in ${mmcdevs}; do " \
193                 "mmc dev ${mmcdev}; " \
194                 "if mmc rescan; then " \
195                         "if run loadbootscript; then " \
196                                 "run bootscript; " \
197                         "else " \
198                                 "if run loaduimage; then " \
199                                         "run mmcboot; " \
200                                 "fi; " \
201                         "fi; " \
202                 "fi; " \
203         "done; " \
204         "run netboot; "
205 #else
206 #define CONFIG_EXTRA_ENV_SETTINGS \
207         "bootdevs=" CONFIG_DRIVE_TYPES "\0" \
208         "umsdevs=" CONFIG_UMSDEVS "\0" \
209         "console=ttymxc1\0" \
210         "clearenv=if sf probe || sf probe || sf probe 1 ; then " \
211                 "sf erase 0xc0000 0x2000 && " \
212                 "echo restored environment to factory default ; fi\0" \
213         "bootcmd=for dtype in ${bootdevs}" \
214                 "; do " \
215                         "if itest.s \"xusb\" == \"x${dtype}\" ; then " \
216                                 "usb start ;" \
217                         "fi; " \
218                         "for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
219                                 "load " \
220                                         "${dtype} ${disk}:1 " \
221                                         "10008000 " \
222                                         "/6x_bootscript" \
223                                         "&& source 10008000 ; " \
224                         "done ; " \
225                 "done; " \
226                 "setenv stdout serial,vga ; " \
227                 "echo ; echo 6x_bootscript not found ; " \
228                 "echo ; echo serial console at 115200, 8N1 ; echo ; " \
229                 "echo details at http://boundarydevices.com/6q_bootscript ; " \
230                 "setenv stdout serial;" \
231                 "setenv stdin serial,usbkbd;" \
232                 "for dtype in ${umsdevs} ; do " \
233                         "if itest.s sata == ${dtype}; then " \
234                                 "initcmd='sata init' ;" \
235                         "else " \
236                                 "initcmd='mmc rescan' ;" \
237                         "fi; " \
238                         "for disk in 0 1 ; do " \
239                                 "if $initcmd && $dtype dev $disk ; then " \
240                                         "setenv stdout serial,vga; " \
241                                         "echo expose ${dtype} ${disk} " \
242                                                 "over USB; " \
243                                         "ums 0 $dtype $disk ;" \
244                                 "fi; " \
245                 "       done; " \
246                 "done ;" \
247                 "setenv stdout serial,vga; " \
248                 "echo no block devices found;" \
249                 "\0" \
250         "initrd_high=0xffffffff\0" \
251         "upgradeu=for dtype in ${bootdevs}" \
252                 "; do " \
253                 "for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
254                         "load ${dtype} ${disk}:1 10008000 " \
255                                 "/6x_upgrade " \
256                                 "&& source 10008000 ; " \
257                 "done ; " \
258         "done\0" \
259
260 #endif
261 /* Miscellaneous configurable options */
262 #define CONFIG_SYS_MEMTEST_START       0x10000000
263 #define CONFIG_SYS_MEMTEST_END         0x10010000
264 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
265
266 /* Physical Memory Map */
267 #define CONFIG_NR_DRAM_BANKS           1
268 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
269
270 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
271 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
272 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
273
274 #define CONFIG_SYS_INIT_SP_OFFSET \
275         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
276 #define CONFIG_SYS_INIT_SP_ADDR \
277         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
278
279 /* Environment organization */
280 #define CONFIG_ENV_SIZE                 (8 * 1024)
281
282 #if defined(CONFIG_SABRELITE)
283 #define CONFIG_ENV_IS_IN_MMC
284 #else
285 #define CONFIG_ENV_IS_IN_SPI_FLASH
286 #endif
287
288 #if defined(CONFIG_ENV_IS_IN_MMC)
289 #define CONFIG_ENV_OFFSET               (6 * 64 * 1024)
290 #define CONFIG_SYS_MMC_ENV_DEV          0
291 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
292 #define CONFIG_ENV_OFFSET               (768 * 1024)
293 #define CONFIG_ENV_SECT_SIZE            (8 * 1024)
294 #define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
295 #define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
296 #define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
297 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
298 #endif
299
300 #define CONFIG_CMD_BMP
301
302 #define CONFIG_SYS_ALT_MEMTEST
303
304 /*
305  * PCI express
306  */
307 #ifdef CONFIG_CMD_PCI
308 #define CONFIG_PCI
309 #define CONFIG_PCI_PNP
310 #define CONFIG_PCI_SCAN_SHOW
311 #define CONFIG_PCIE_IMX
312 #endif
313
314 #define CONFIG_USB_FUNCTION_MASS_STORAGE
315
316 #define CONFIG_USB_FUNCTION_FASTBOOT
317 #define CONFIG_CMD_FASTBOOT
318 #define CONFIG_ANDROID_BOOT_IMAGE
319 #define CONFIG_FASTBOOT_BUF_ADDR   CONFIG_SYS_LOAD_ADDR
320 #define CONFIG_FASTBOOT_BUF_SIZE   0x07000000
321
322 #endif         /* __CONFIG_H */