Merge tag 'signed-efi-next' of git://github.com/agraf/u-boot
[platform/kernel/u-boot.git] / include / configs / nitrogen6x.h
1 /*
2  * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
3  *
4  * Configuration settings for the Boundary Devices Nitrogen6X
5  * and Freescale i.MX6Q Sabre Lite boards.
6  *
7  * SPDX-License-Identifier:     GPL-2.0+
8  */
9
10 #ifndef __CONFIG_H
11 #define __CONFIG_H
12
13 #include "mx6_common.h"
14
15 #define CONFIG_MACH_TYPE        3769
16
17 /* Size of malloc() pool */
18 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
19
20 #define CONFIG_MISC_INIT_R
21 #define CONFIG_USBD_HS
22 #define CONFIG_USB_ETHER
23 #define CONFIG_USB_ETH_CDC
24 #define CONFIG_NETCONSOLE
25
26 #define CONFIG_MXC_UART
27 #define CONFIG_MXC_UART_BASE           UART2_BASE
28
29 #ifdef CONFIG_CMD_SF
30 #define CONFIG_MXC_SPI
31 #define CONFIG_SF_DEFAULT_BUS  0
32 #define CONFIG_SF_DEFAULT_CS   0
33 #define CONFIG_SF_DEFAULT_SPEED 25000000
34 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
35 #endif
36
37 /* I2C Configs */
38 #define CONFIG_SYS_I2C
39 #define CONFIG_SYS_I2C_MXC
40 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
41 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
42 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
43 #define CONFIG_SYS_I2C_SPEED            100000
44 #define CONFIG_I2C_EDID
45
46 /* MMC Configs */
47 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
48 #define CONFIG_SYS_FSL_USDHC_NUM       2
49
50 /*
51  * SATA Configs
52  */
53 #ifdef CONFIG_CMD_SATA
54 #define CONFIG_DWC_AHSATA
55 #define CONFIG_SYS_SATA_MAX_DEVICE      1
56 #define CONFIG_DWC_AHSATA_PORT_ID       0
57 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
58 #define CONFIG_LBA48
59 #define CONFIG_LIBATA
60 #endif
61
62 #define CONFIG_FEC_MXC
63 #define CONFIG_MII
64 #define IMX_FEC_BASE                    ENET_BASE_ADDR
65 #define CONFIG_FEC_XCV_TYPE             RGMII
66 #define CONFIG_ETHPRIME                 "FEC"
67 #define CONFIG_FEC_MXC_PHYADDR          6
68 #define CONFIG_PHYLIB
69 #define CONFIG_PHY_MICREL
70 #define CONFIG_PHY_MICREL_KSZ9021
71
72 /* USB Configs */
73 #define CONFIG_USB_HOST_ETHER
74 #define CONFIG_USB_ETHER_ASIX
75 #define CONFIG_USB_ETHER_MCS7830
76 #define CONFIG_USB_ETHER_SMSC95XX
77 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
78 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET        /* For OTG port */
79 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
80 #define CONFIG_MXC_USB_FLAGS    0
81 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
82
83 /* Framebuffer and LCD */
84 #define CONFIG_VIDEO_IPUV3
85 #define CONFIG_VIDEO_BMP_RLE8
86 #define CONFIG_SPLASH_SCREEN
87 #define CONFIG_SPLASH_SCREEN_ALIGN
88 #define CONFIG_VIDEO_BMP_GZIP
89 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (6 * 1024 * 1024)
90 #define CONFIG_BMP_16BPP
91 #define CONFIG_IPUV3_CLK 260000000
92 #define CONFIG_IMX_HDMI
93 #define CONFIG_IMX_VIDEO_SKIP
94
95 #define CONFIG_PREBOOT                 ""
96
97 #ifdef CONFIG_CMD_SATA
98 #define CONFIG_DRIVE_SATA "sata "
99 #else
100 #define CONFIG_DRIVE_SATA
101 #endif
102
103 #ifdef CONFIG_CMD_MMC
104 #define CONFIG_DRIVE_MMC "mmc "
105 #else
106 #define CONFIG_DRIVE_MMC
107 #endif
108
109 #ifdef CONFIG_USB_STORAGE
110 #define CONFIG_DRIVE_USB "usb "
111 #else
112 #define CONFIG_DRIVE_USB
113 #endif
114
115 #define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC CONFIG_DRIVE_USB
116 #define CONFIG_UMSDEVS CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC
117
118 #if defined(CONFIG_SABRELITE)
119 #define CONFIG_EXTRA_ENV_SETTINGS \
120         "script=boot.scr\0" \
121         "uimage=uImage\0" \
122         "console=ttymxc1\0" \
123         "fdt_high=0xffffffff\0" \
124         "initrd_high=0xffffffff\0" \
125         "fdt_file=imx6q-sabrelite.dtb\0" \
126         "fdt_addr=0x18000000\0" \
127         "boot_fdt=try\0" \
128         "ip_dyn=yes\0" \
129         "usb_pgood_delay=2000\0" \
130         "mmcdevs=0 1\0" \
131         "mmcpart=1\0" \
132         "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
133         "mmcargs=setenv bootargs console=${console},${baudrate} " \
134                 "root=${mmcroot}\0" \
135         "loadbootscript=" \
136                 "load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
137         "bootscript=echo Running bootscript from mmc ...; " \
138                 "source\0" \
139         "loaduimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
140         "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
141         "mmcboot=echo Booting from mmc ...; " \
142                 "run mmcargs; " \
143                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
144                         "if run loadfdt; then " \
145                                 "bootm ${loadaddr} - ${fdt_addr}; " \
146                         "else " \
147                                 "if test ${boot_fdt} = try; then " \
148                                         "bootm; " \
149                                 "else " \
150                                         "echo WARN: Cannot load the DT; " \
151                                 "fi; " \
152                         "fi; " \
153                 "else " \
154                         "bootm; " \
155                 "fi;\0" \
156         "netargs=setenv bootargs console=${console},${baudrate} " \
157                 "root=/dev/nfs " \
158         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
159                 "netboot=echo Booting from net ...; " \
160                 "run netargs; " \
161                 "if test ${ip_dyn} = yes; then " \
162                         "setenv get_cmd dhcp; " \
163                 "else " \
164                         "setenv get_cmd tftp; " \
165                 "fi; " \
166                 "${get_cmd} ${uimage}; " \
167                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
168                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
169                                 "bootm ${loadaddr} - ${fdt_addr}; " \
170                         "else " \
171                                 "if test ${boot_fdt} = try; then " \
172                                         "bootm; " \
173                                 "else " \
174                                         "echo WARN: Cannot load the DT; " \
175                                 "fi; " \
176                         "fi; " \
177                 "else " \
178                         "bootm; " \
179                 "fi;\0"
180
181 #define CONFIG_BOOTCOMMAND \
182         "for mmcdev in ${mmcdevs}; do " \
183                 "mmc dev ${mmcdev}; " \
184                 "if mmc rescan; then " \
185                         "if run loadbootscript; then " \
186                                 "run bootscript; " \
187                         "else " \
188                                 "if run loaduimage; then " \
189                                         "run mmcboot; " \
190                                 "fi; " \
191                         "fi; " \
192                 "fi; " \
193         "done; " \
194         "run netboot; "
195 #else
196 #define CONFIG_EXTRA_ENV_SETTINGS \
197         "bootdevs=" CONFIG_DRIVE_TYPES "\0" \
198         "umsdevs=" CONFIG_UMSDEVS "\0" \
199         "usb_pgood_delay=2000\0" \
200         "console=ttymxc1\0" \
201         "clearenv=if sf probe || sf probe || sf probe 1 ; then " \
202                 "sf erase 0xc0000 0x2000 && " \
203                 "echo restored environment to factory default ; fi\0" \
204         "bootcmd=for dtype in ${bootdevs}" \
205                 "; do " \
206                         "if itest.s \"xusb\" == \"x${dtype}\" ; then " \
207                                 "usb start ;" \
208                         "fi; " \
209                         "for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
210                                 "load " \
211                                         "${dtype} ${disk}:1 " \
212                                         "10008000 " \
213                                         "/6x_bootscript" \
214                                         "&& source 10008000 ; " \
215                         "done ; " \
216                 "done; " \
217                 "setenv stdout serial,vga ; " \
218                 "echo ; echo 6x_bootscript not found ; " \
219                 "echo ; echo serial console at 115200, 8N1 ; echo ; " \
220                 "echo details at http://boundarydevices.com/6q_bootscript ; " \
221                 "setenv stdout serial;" \
222                 "setenv stdin serial,usbkbd;" \
223                 "for dtype in ${umsdevs} ; do " \
224                         "if itest.s sata == ${dtype}; then " \
225                                 "initcmd='sata init' ;" \
226                         "else " \
227                                 "initcmd='mmc rescan' ;" \
228                         "fi; " \
229                         "for disk in 0 1 ; do " \
230                                 "if $initcmd && $dtype dev $disk ; then " \
231                                         "setenv stdout serial,vga; " \
232                                         "echo expose ${dtype} ${disk} " \
233                                                 "over USB; " \
234                                         "ums 0 $dtype $disk ;" \
235                                 "fi; " \
236                 "       done; " \
237                 "done ;" \
238                 "setenv stdout serial,vga; " \
239                 "echo no block devices found;" \
240                 "\0" \
241         "initrd_high=0xffffffff\0" \
242         "upgradeu=for dtype in ${bootdevs}" \
243                 "; do " \
244                 "for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
245                         "load ${dtype} ${disk}:1 10008000 " \
246                                 "/6x_upgrade " \
247                                 "&& source 10008000 ; " \
248                 "done ; " \
249         "done\0" \
250
251 #endif
252 /* Miscellaneous configurable options */
253 #define CONFIG_SYS_MEMTEST_START       0x10000000
254 #define CONFIG_SYS_MEMTEST_END         0x10010000
255 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
256
257 /* Physical Memory Map */
258 #define CONFIG_NR_DRAM_BANKS           1
259 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
260
261 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
262 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
263 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
264
265 #define CONFIG_SYS_INIT_SP_OFFSET \
266         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
267 #define CONFIG_SYS_INIT_SP_ADDR \
268         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
269
270 /* Environment organization */
271 #define CONFIG_ENV_SIZE                 (8 * 1024)
272
273 #if defined(CONFIG_ENV_IS_IN_MMC)
274 #define CONFIG_ENV_OFFSET               (6 * 64 * 1024)
275 #define CONFIG_SYS_MMC_ENV_DEV          0
276 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
277 #define CONFIG_ENV_OFFSET               (768 * 1024)
278 #define CONFIG_ENV_SECT_SIZE            (8 * 1024)
279 #define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
280 #define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
281 #define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
282 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
283 #endif
284
285 #define CONFIG_SYS_ALT_MEMTEST
286
287 /*
288  * PCI express
289  */
290 #ifdef CONFIG_CMD_PCI
291 #define CONFIG_PCI_SCAN_SHOW
292 #define CONFIG_PCIE_IMX
293 #endif
294
295 #define CONFIG_USB_FUNCTION_MASS_STORAGE
296
297 #define CONFIG_USB_FUNCTION_FASTBOOT
298 #define CONFIG_CMD_FASTBOOT
299 #define CONFIG_ANDROID_BOOT_IMAGE
300 #define CONFIG_FASTBOOT_BUF_ADDR   CONFIG_SYS_LOAD_ADDR
301 #define CONFIG_FASTBOOT_BUF_SIZE   0x07000000
302
303 #endif         /* __CONFIG_H */