include/configs/nitrogen6x.h

   1 /*
   2  * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Boundary Devices Nitrogen6X
   5  * and Freescale i.MX6Q Sabre Lite boards.
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #include "mx6_common.h"
  14 #define CONFIG_MX6
  15 #define CONFIG_DISPLAY_CPUINFO
  16 #define CONFIG_DISPLAY_BOARDINFO
  17
  18 #define CONFIG_MACH_TYPE        3769
  19
  20 #include <asm/arch/imx-regs.h>
  21 #include <asm/imx-common/gpio.h>
  22
  23 #define CONFIG_CMDLINE_TAG
  24 #define CONFIG_SETUP_MEMORY_TAGS
  25 #define CONFIG_INITRD_TAG
  26 #define CONFIG_REVISION_TAG
  27 #define CONFIG_SYS_GENERIC_BOARD
  28
  29 /* Size of malloc() pool */
  30 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
  31
  32 #define CONFIG_BOARD_EARLY_INIT_F
  33 #define CONFIG_MISC_INIT_R
  34 #define CONFIG_MXC_GPIO
  35 #define CONFIG_CMD_GPIO
  36 #define CONFIG_CI_UDC
  37 #define CONFIG_USBD_HS
  38 #define CONFIG_USB_GADGET_DUALSPEED
  39 #define CONFIG_USB_ETHER
  40 #define CONFIG_USB_ETH_CDC
  41 #define CONFIG_NETCONSOLE
  42
  43 #define CONFIG_CMD_FUSE
  44 #ifdef CONFIG_CMD_FUSE
  45 #define CONFIG_MXC_OCOTP
  46 #endif
  47
  48 #define CONFIG_MXC_UART
  49 #define CONFIG_MXC_UART_BASE           UART2_BASE
  50
  51 #define CONFIG_CMD_SF
  52 #ifdef CONFIG_CMD_SF
  53 #define CONFIG_SPI_FLASH
  54 #define CONFIG_SPI_FLASH_SST
  55 #define CONFIG_MXC_SPI
  56 #define CONFIG_SF_DEFAULT_BUS  0
  57 #define CONFIG_SF_DEFAULT_CS   0
  58 #define CONFIG_SF_DEFAULT_SPEED 25000000
  59 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
  60 #endif
  61
  62 /* I2C Configs */
  63 #define CONFIG_CMD_I2C
  64 #define CONFIG_SYS_I2C
  65 #define CONFIG_SYS_I2C_MXC
  66 #define CONFIG_SYS_I2C_SPEED            100000
  67 #define CONFIG_I2C_EDID
  68
  69 /* MMC Configs */
  70 #define CONFIG_FSL_ESDHC
  71 #define CONFIG_FSL_USDHC
  72 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  73 #define CONFIG_SYS_FSL_USDHC_NUM       2
  74
  75 #define CONFIG_MMC
  76 #define CONFIG_CMD_MMC
  77 #define CONFIG_GENERIC_MMC
  78 #define CONFIG_BOUNCE_BUFFER
  79 #define CONFIG_CMD_EXT2
  80 #define CONFIG_CMD_EXT4
  81 #define CONFIG_CMD_EXT4_WRITE
  82 #define CONFIG_CMD_FAT
  83 #define CONFIG_DOS_PARTITION
  84
  85 #ifdef CONFIG_MX6Q
  86 #define CONFIG_CMD_SATA
  87 #endif
  88
  89 /*
  90  * SATA Configs
  91  */
  92 #ifdef CONFIG_CMD_SATA
  93 #define CONFIG_DWC_AHSATA
  94 #define CONFIG_SYS_SATA_MAX_DEVICE      1
  95 #define CONFIG_DWC_AHSATA_PORT_ID       0
  96 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  97 #define CONFIG_LBA48
  98 #define CONFIG_LIBATA
  99 #endif
 100
 101 #define CONFIG_CMD_PING
 102 #define CONFIG_CMD_DHCP
 103 #define CONFIG_CMD_MII
 104 #define CONFIG_CMD_NET
 105 #define CONFIG_FEC_MXC
 106 #define CONFIG_MII
 107 #define IMX_FEC_BASE                    ENET_BASE_ADDR
 108 #define CONFIG_FEC_XCV_TYPE             RGMII
 109 #define CONFIG_ETHPRIME                 "FEC"
 110 #define CONFIG_FEC_MXC_PHYADDR          6
 111 #define CONFIG_PHYLIB
 112 #define CONFIG_PHY_MICREL
 113 #define CONFIG_PHY_MICREL_KSZ9021
 114
 115 /* USB Configs */
 116 #define CONFIG_CMD_USB
 117 #define CONFIG_CMD_FAT
 118 #define CONFIG_USB_EHCI
 119 #define CONFIG_USB_EHCI_MX6
 120 #define CONFIG_USB_STORAGE
 121 #define CONFIG_USB_HOST_ETHER
 122 #define CONFIG_USB_ETHER_ASIX
 123 #define CONFIG_USB_ETHER_MCS7830
 124 #define CONFIG_USB_ETHER_SMSC95XX
 125 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 126 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET        /* For OTG port */
 127 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
 128 #define CONFIG_MXC_USB_FLAGS    0
 129 #define CONFIG_USB_KEYBOARD
 130 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
 131
 132 /* Miscellaneous commands */
 133 #define CONFIG_CMD_BMODE
 134 #define CONFIG_CMD_SETEXPR
 135
 136 /* Framebuffer and LCD */
 137 #define CONFIG_VIDEO
 138 #define CONFIG_VIDEO_IPUV3
 139 #define CONFIG_CFB_CONSOLE
 140 #define CONFIG_VGA_AS_SINGLE_DEVICE
 141 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 142 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 143 #define CONFIG_VIDEO_BMP_RLE8
 144 #define CONFIG_SPLASH_SCREEN
 145 #define CONFIG_BMP_16BPP
 146 #define CONFIG_IPUV3_CLK 260000000
 147 #define CONFIG_CMD_HDMIDETECT
 148 #define CONFIG_CONSOLE_MUX
 149 #define CONFIG_IMX_HDMI
 150 #define CONFIG_IMX_VIDEO_SKIP
 151
 152 /* allow to overwrite serial and ethaddr */
 153 #define CONFIG_ENV_OVERWRITE
 154 #define CONFIG_CONS_INDEX              1
 155 #define CONFIG_BAUDRATE                        115200
 156
 157 /* Command definition */
 158 #include <config_cmd_default.h>
 159
 160 #undef CONFIG_CMD_IMLS
 161
 162 #define CONFIG_BOOTDELAY               1
 163
 164 #define CONFIG_PREBOOT                 ""
 165
 166 #define CONFIG_LOADADDR                        0x12000000
 167 #define CONFIG_SYS_TEXT_BASE           0x17800000
 168
 169 #ifdef CONFIG_CMD_SATA
 170 #define CONFIG_DRIVE_SATA "sata "
 171 #else
 172 #define CONFIG_DRIVE_SATA
 173 #endif
 174
 175 #ifdef CONFIG_CMD_MMC
 176 #define CONFIG_DRIVE_MMC "mmc "
 177 #else
 178 #define CONFIG_DRIVE_MMC
 179 #endif
 180
 181 #ifdef CONFIG_USB_STORAGE
 182 #define CONFIG_DRIVE_USB "usb "
 183 #else
 184 #define CONFIG_DRIVE_USB
 185 #endif
 186
 187 #define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC CONFIG_DRIVE_USB
 188 #define CONFIG_UMSDEVS CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC
 189
 190 #if defined(CONFIG_SABRELITE)
 191 #define CONFIG_EXTRA_ENV_SETTINGS \
 192         "script=boot.scr\0" \
 193         "uimage=uImage\0" \
 194         "console=ttymxc1\0" \
 195         "fdt_high=0xffffffff\0" \
 196         "initrd_high=0xffffffff\0" \
 197         "fdt_file=imx6q-sabrelite.dtb\0" \
 198         "fdt_addr=0x18000000\0" \
 199         "boot_fdt=try\0" \
 200         "ip_dyn=yes\0" \
 201         "mmcdevs=0 1\0" \
 202         "mmcpart=1\0" \
 203         "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
 204         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 205                 "root=${mmcroot}\0" \
 206         "loadbootscript=" \
 207                 "load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 208         "bootscript=echo Running bootscript from mmc ...; " \
 209                 "source\0" \
 210         "loaduimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
 211         "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 212         "mmcboot=echo Booting from mmc ...; " \
 213                 "run mmcargs; " \
 214                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 215                         "if run loadfdt; then " \
 216                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 217                         "else " \
 218                                 "if test ${boot_fdt} = try; then " \
 219                                         "bootm; " \
 220                                 "else " \
 221                                         "echo WARN: Cannot load the DT; " \
 222                                 "fi; " \
 223                         "fi; " \
 224                 "else " \
 225                         "bootm; " \
 226                 "fi;\0" \
 227         "netargs=setenv bootargs console=${console},${baudrate} " \
 228                 "root=/dev/nfs " \
 229         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 230                 "netboot=echo Booting from net ...; " \
 231                 "run netargs; " \
 232                 "if test ${ip_dyn} = yes; then " \
 233                         "setenv get_cmd dhcp; " \
 234                 "else " \
 235                         "setenv get_cmd tftp; " \
 236                 "fi; " \
 237                 "${get_cmd} ${uimage}; " \
 238                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 239                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 240                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 241                         "else " \
 242                                 "if test ${boot_fdt} = try; then " \
 243                                         "bootm; " \
 244                                 "else " \
 245                                         "echo WARN: Cannot load the DT; " \
 246                                 "fi; " \
 247                         "fi; " \
 248                 "else " \
 249                         "bootm; " \
 250                 "fi;\0"
 251
 252 #define CONFIG_BOOTCOMMAND \
 253         "for mmcdev in ${mmcdevs}; do " \
 254                 "mmc dev ${mmcdev}; " \
 255                 "if mmc rescan; then " \
 256                         "if run loadbootscript; then " \
 257                                 "run bootscript; " \
 258                         "else " \
 259                                 "if run loaduimage; then " \
 260                                         "run mmcboot; " \
 261                                 "fi; " \
 262                         "fi; " \
 263                 "fi; " \
 264         "done; " \
 265         "run netboot; "
 266 #else
 267 #define CONFIG_EXTRA_ENV_SETTINGS \
 268         "bootdevs=" CONFIG_DRIVE_TYPES "\0" \
 269         "umsdevs=" CONFIG_UMSDEVS "\0" \
 270         "console=ttymxc1\0" \
 271         "clearenv=if sf probe || sf probe || sf probe 1 ; then " \
 272                 "sf erase 0xc0000 0x2000 && " \
 273                 "echo restored environment to factory default ; fi\0" \
 274         "bootcmd=for dtype in ${bootdevs}" \
 275                 "; do " \
 276                         "if itest.s \"xusb\" == \"x${dtype}\" ; then " \
 277                                 "usb start ;" \
 278                         "fi; " \
 279                         "for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
 280                                 "load " \
 281                                         "${dtype} ${disk}:1 " \
 282                                         "10008000 " \
 283                                         "/6x_bootscript" \
 284                                         "&& source 10008000 ; " \
 285                         "done ; " \
 286                 "done; " \
 287                 "setenv stdout serial,vga ; " \
 288                 "echo ; echo 6x_bootscript not found ; " \
 289                 "echo ; echo serial console at 115200, 8N1 ; echo ; " \
 290                 "echo details at http://boundarydevices.com/6q_bootscript ; " \
 291                 "setenv stdout serial;" \
 292                 "setenv stdin serial,usbkbd;" \
 293                 "for dtype in ${umsdevs} ; do " \
 294                         "if itest.s sata == ${dtype}; then " \
 295                                 "initcmd='sata init' ;" \
 296                         "else " \
 297                                 "initcmd='mmc rescan' ;" \
 298                         "fi; " \
 299                         "for disk in 0 1 ; do " \
 300                                 "if $initcmd && $dtype dev $disk ; then " \
 301                                         "setenv stdout serial,vga; " \
 302                                         "echo expose ${dtype} ${disk} " \
 303                                                 "over USB; " \
 304                                         "ums 0 $dtype $disk ;" \
 305                                 "fi; " \
 306                 "       done; " \
 307                 "done ;" \
 308                 "setenv stdout serial,vga; " \
 309                 "echo no block devices found;" \
 310                 "\0" \
 311         "initrd_high=0xffffffff\0" \
 312         "upgradeu=for dtype in ${bootdevs}" \
 313                 "; do " \
 314                 "for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
 315                         "load ${dtype} ${disk}:1 10008000 " \
 316                                 "/6x_upgrade " \
 317                                 "&& source 10008000 ; " \
 318                 "done ; " \
 319         "done\0" \
 320
 321 #endif
 322 /* Miscellaneous configurable options */
 323 #define CONFIG_SYS_LONGHELP
 324 #define CONFIG_SYS_HUSH_PARSER
 325 #define CONFIG_SYS_PROMPT              "U-Boot > "
 326 #define CONFIG_AUTO_COMPLETE
 327 #define CONFIG_SYS_CBSIZE              1024
 328 #define CONFIG_SYS_MAXARGS             48
 329 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 330
 331 #define CONFIG_SYS_MEMTEST_START       0x10000000
 332 #define CONFIG_SYS_MEMTEST_END         0x10010000
 333 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 334
 335 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 336
 337 #define CONFIG_CMDLINE_EDITING
 338
 339 /* Physical Memory Map */
 340 #define CONFIG_NR_DRAM_BANKS           1
 341 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 342
 343 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 344 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 345 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 346
 347 #define CONFIG_SYS_INIT_SP_OFFSET \
 348         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 349 #define CONFIG_SYS_INIT_SP_ADDR \
 350         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 351
 352 /* FLASH and environment organization */
 353 #define CONFIG_SYS_NO_FLASH
 354
 355 #define CONFIG_ENV_SIZE                 (8 * 1024)
 356
 357 #if defined(CONFIG_SABRELITE)
 358 #define CONFIG_ENV_IS_IN_MMC
 359 #else
 360 #define CONFIG_ENV_IS_IN_SPI_FLASH
 361 #endif
 362
 363 #if defined(CONFIG_ENV_IS_IN_MMC)
 364 #define CONFIG_ENV_OFFSET               (6 * 64 * 1024)
 365 #define CONFIG_SYS_MMC_ENV_DEV          0
 366 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
 367 #define CONFIG_ENV_OFFSET               (768 * 1024)
 368 #define CONFIG_ENV_SECT_SIZE            (8 * 1024)
 369 #define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
 370 #define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
 371 #define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
 372 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
 373 #endif
 374
 375 #define CONFIG_OF_LIBFDT
 376 #define CONFIG_CMD_BOOTZ
 377
 378 #ifndef CONFIG_SYS_DCACHE_OFF
 379 #define CONFIG_CMD_CACHE
 380 #endif
 381
 382 #define CONFIG_CMD_BMP
 383
 384 #define CONFIG_CMD_TIME
 385 #define CONFIG_CMD_MEMTEST
 386 #define CONFIG_SYS_ALT_MEMTEST
 387
 388 #define CONFIG_CMD_BOOTZ
 389 #define CONFIG_SUPPORT_RAW_INITRD
 390 #define CONFIG_CMD_FS_GENERIC
 391
 392 /*
 393  * PCI express
 394  */
 395 #ifdef CONFIG_CMD_PCI
 396 #define CONFIG_PCI
 397 #define CONFIG_PCI_PNP
 398 #define CONFIG_PCI_SCAN_SHOW
 399 #define CONFIG_PCIE_IMX
 400 #endif
 401
 402 #define CONFIG_CMD_ELF
 403
 404 #define CONFIG_USB_GADGET
 405 #define CONFIG_CMD_USB_MASS_STORAGE
 406 #define CONFIG_USB_GADGET_MASS_STORAGE
 407 #define CONFIG_USBDOWNLOAD_GADGET
 408 #define CONFIG_USB_GADGET_VBUS_DRAW     2
 409
 410 /* Netchip IDs */
 411 #define CONFIG_G_DNL_VENDOR_NUM 0x0525
 412 #define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
 413 #define CONFIG_G_DNL_MANUFACTURER "Boundary"
 414
 415 #define CONFIG_CMD_FASTBOOT
 416 #define CONFIG_ANDROID_BOOT_IMAGE
 417 #define CONFIG_USB_FASTBOOT_BUF_ADDR   CONFIG_SYS_LOAD_ADDR
 418 #define CONFIG_USB_FASTBOOT_BUF_SIZE   0x07000000
 419
 420 #endif         /* __CONFIG_H */