2 * Copyright (C) 2014 Evgeni Dobrev <evgeni@studio-punkt.com>
6 * Marvell Semiconductor <www.marvell.com>
7 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
9 * SPDX-License-Identifier: GPL-2.0+
12 #ifndef _CONFIG_NAS220_H
13 #define _CONFIG_NAS220_H
16 * Machine type definition and ID
18 #define MACH_TYPE_NAS220 MACH_TYPE_RD88F6192_NAS
19 #define CONFIG_MACH_TYPE MACH_TYPE_NAS220
20 #define CONFIG_IDENT_STRING "\nNAS 220"
23 * High Level Configuration Options (easy to change)
25 #define CONFIG_FEROCEON_88FR131 /* #define CPU Core subversion */
26 #define CONFIG_KW88F6192 /* SOC Name */
27 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
29 /* power-on led, regulator, sata0, sata1 */
30 #define NAS220_GE_OE_VAL_LOW ((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28))
31 #define NAS220_GE_OE_VAL_HIGH (0)
32 #define NAS220_GE_OE_LOW (~((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28)))
33 #define NAS220_GE_OE_HIGH (~(0))
36 #define MV88E1116_LED_FCTRL_REG 10
37 #define MV88E1116_CPRSP_CR3_REG 21
38 #define MV88E1116_MAC_CTRL_REG 21
39 #define MV88E1116_PGADR_REG 22
40 #define MV88E1116_RGMII_TXTM_CTRL (1 << 4)
41 #define MV88E1116_RGMII_RXTM_CTRL (1 << 5)
44 * Commands configuration
46 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
47 #define CONFIG_CMD_NAND
48 #define CONFIG_CMD_DATE
49 #define CONFIG_CMD_IDE
50 #define CONFIG_SYS_LONGHELP
51 #define CONFIG_AUTO_COMPLETE
52 #define CONFIG_CMDLINE_EDITING
55 * mv-common.h should be defined after CMD configs since it used them
56 * to enable certain macros
58 #include "mv-common.h"
61 * Environment variables configurations
63 #ifdef CONFIG_CMD_NAND
64 #define CONFIG_ENV_IS_IN_NAND
65 #define CONFIG_ENV_SECT_SIZE 0x10000
67 #define CONFIG_ENV_IS_NOWHERE
70 #define CONFIG_ENV_SIZE 0x10000
71 #define CONFIG_ENV_OFFSET 0xa0000
74 * Default environment variables
76 #define CONFIG_BOOTCOMMAND ""
78 #define CONFIG_EXTRA_ENV_SETTINGS \
79 "bootargs=console=ttyS0,115200\0" \
80 "mtdparts=mtdparts=orion_nand:0xa0000@0x0(uboot),"\
81 "0x010000@0xa0000(env),"\
82 "0x500000@0xc0000(uimage),"\
83 "0x1a40000@0x5c0000(rootfs)\0" \
84 "mtdids=nand0=orion_nand\0"\
90 * Ethernet Driver configuration
93 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
94 #define CONFIG_PHY_BASE_ADR 8
95 #endif /* CONFIG_CMD_NET */
100 #ifdef CONFIG_CMD_USB
101 #define CONFIG_USB_EHCI /* Enable EHCI USB support */
102 #define CONFIG_USB_EHCI_KIRKWOOD /* on Kirkwood platform */
103 #define CONFIG_EHCI_IS_TDI
104 #define CONFIG_USB_STORAGE
105 #define CONFIG_DOS_PARTITION
106 #define CONFIG_SUPPORT_VFAT
107 #endif /* CONFIG_CMD_USB */
112 #define CONFIG_CMD_JFFS2
113 #define CONFIG_JFFS2_NAND
114 #define CONFIG_JFFS2_LZO
115 #define CONFIG_CMD_UBI
116 #define CONFIG_CMD_UBIFS
117 #define CONFIG_RBTREE
118 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
119 #define CONFIG_MTD_PARTITIONS
120 #define CONFIG_CMD_MTDPARTS
126 #ifdef CONFIG_MVSATA_IDE
127 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
128 #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
134 #define CONFIG_EFI_PARTITION
139 #ifdef CONFIG_CMD_DATE
140 #define CONFIG_RTC_MV
141 #endif /* CONFIG_CMD_DATE */
143 #define CONFIG_KIRKWOOD_GPIO
145 #endif /* _CONFIG_NAS220_H */