2 * Copyright (C) 2014 Evgeni Dobrev <evgeni@studio-punkt.com>
6 * Marvell Semiconductor <www.marvell.com>
7 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
9 * SPDX-License-Identifier: GPL-2.0+
12 #ifndef _CONFIG_NAS220_H
13 #define _CONFIG_NAS220_H
16 * Machine type definition and ID
18 #define MACH_TYPE_NAS220 MACH_TYPE_RD88F6192_NAS
19 #define CONFIG_MACH_TYPE MACH_TYPE_NAS220
22 * High Level Configuration Options (easy to change)
24 #define CONFIG_FEROCEON_88FR131 /* #define CPU Core subversion */
25 #define CONFIG_KW88F6192 /* SOC Name */
26 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
28 /* power-on led, regulator, sata0, sata1 */
29 #define NAS220_GE_OE_VAL_LOW ((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28))
30 #define NAS220_GE_OE_VAL_HIGH (0)
31 #define NAS220_GE_OE_LOW (~((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28)))
32 #define NAS220_GE_OE_HIGH (~(0))
35 #define MV88E1116_LED_FCTRL_REG 10
36 #define MV88E1116_CPRSP_CR3_REG 21
37 #define MV88E1116_MAC_CTRL_REG 21
38 #define MV88E1116_PGADR_REG 22
39 #define MV88E1116_RGMII_TXTM_CTRL (1 << 4)
40 #define MV88E1116_RGMII_RXTM_CTRL (1 << 5)
43 * Commands configuration
45 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
46 #define CONFIG_CMD_NAND
47 #define CONFIG_CMD_DATE
48 #define CONFIG_CMD_IDE
49 #define CONFIG_SYS_LONGHELP
50 #define CONFIG_AUTO_COMPLETE
51 #define CONFIG_CMDLINE_EDITING
54 * mv-common.h should be defined after CMD configs since it used them
55 * to enable certain macros
57 #include "mv-common.h"
60 * Environment variables configurations
62 #ifdef CONFIG_CMD_NAND
63 #define CONFIG_ENV_IS_IN_NAND
64 #define CONFIG_ENV_SECT_SIZE 0x10000
66 #define CONFIG_ENV_IS_NOWHERE
69 #define CONFIG_ENV_SIZE 0x10000
70 #define CONFIG_ENV_OFFSET 0xa0000
73 * Default environment variables
75 #define CONFIG_BOOTCOMMAND ""
77 #define CONFIG_EXTRA_ENV_SETTINGS \
78 "bootargs=console=ttyS0,115200\0" \
79 "mtdparts=mtdparts=orion_nand:0xa0000@0x0(uboot),"\
80 "0x010000@0xa0000(env),"\
81 "0x500000@0xc0000(uimage),"\
82 "0x1a40000@0x5c0000(rootfs)\0" \
83 "mtdids=nand0=orion_nand\0"\
89 * Ethernet Driver configuration
92 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
93 #define CONFIG_PHY_BASE_ADR 8
94 #endif /* CONFIG_CMD_NET */
100 #define CONFIG_USB_EHCI /* Enable EHCI USB support */
101 #define CONFIG_USB_EHCI_KIRKWOOD /* on Kirkwood platform */
102 #define CONFIG_EHCI_IS_TDI
103 #define CONFIG_DOS_PARTITION
104 #define CONFIG_SUPPORT_VFAT
105 #endif /* CONFIG_CMD_USB */
110 #define CONFIG_CMD_JFFS2
111 #define CONFIG_JFFS2_NAND
112 #define CONFIG_JFFS2_LZO
113 #define CONFIG_CMD_UBIFS
114 #define CONFIG_RBTREE
115 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
116 #define CONFIG_MTD_PARTITIONS
117 #define CONFIG_CMD_MTDPARTS
123 #ifdef CONFIG_MVSATA_IDE
124 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
125 #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
131 #define CONFIG_EFI_PARTITION
136 #ifdef CONFIG_CMD_DATE
137 #define CONFIG_RTC_MV
138 #endif /* CONFIG_CMD_DATE */
140 #define CONFIG_KIRKWOOD_GPIO
142 #endif /* _CONFIG_NAS220_H */