include/configs/mx7dsabresd.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2015 Freescale Semiconductor, Inc.
   4  *
   5  * Configuration settings for the Freescale i.MX7D SABRESD board.
   6  */
   7
   8 #ifndef __MX7D_SABRESD_CONFIG_H
   9 #define __MX7D_SABRESD_CONFIG_H
  10
  11 #include "mx7_common.h"
  12
  13 #define PHYS_SDRAM_SIZE                 SZ_1G
  14
  15 #define CONFIG_MXC_UART_BASE            UART1_IPS_BASE_ADDR
  16
  17 /* Size of malloc() pool */
  18 #define CONFIG_SYS_MALLOC_LEN           (32 * SZ_1M)
  19
  20 /* Network */
  21 #define CONFIG_FEC_MXC
  22 #define CONFIG_FEC_XCV_TYPE             RGMII
  23 #define CONFIG_ETHPRIME                 "FEC"
  24 #define CONFIG_FEC_MXC_PHYADDR          0
  25
  26 #define CONFIG_PHY_BROADCOM
  27 /* ENET1 */
  28 #define IMX_FEC_BASE                    ENET_IPS_BASE_ADDR
  29
  30 /* MMC Config*/
  31 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  32
  33 #undef CONFIG_BOOTM_NETBSD
  34 #undef CONFIG_BOOTM_PLAN9
  35 #undef CONFIG_BOOTM_RTEMS
  36
  37 /* I2C configs */
  38 #define CONFIG_SYS_I2C_MXC
  39 #define CONFIG_SYS_I2C_SPEED            100000
  40
  41 #define CONFIG_SUPPORT_EMMC_BOOT        /* eMMC specific */
  42 #define CONFIG_SYS_MMC_IMG_LOAD_PART    1
  43
  44 #ifdef CONFIG_IMX_BOOTAUX
  45 /* Set to QSPI1 A flash at default */
  46 #define CONFIG_SYS_AUXCORE_BOOTDATA 0x60000000
  47
  48 #define UPDATE_M4_ENV \
  49         "m4image=m4_qspi.bin\0" \
  50         "loadm4image=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${m4image}\0" \
  51         "update_m4_from_sd=" \
  52                 "if sf probe 0:0; then " \
  53                         "if run loadm4image; then " \
  54                                 "setexpr fw_sz ${filesize} + 0xffff; " \
  55                                 "setexpr fw_sz ${fw_sz} / 0x10000; "    \
  56                                 "setexpr fw_sz ${fw_sz} * 0x10000; "    \
  57                                 "sf erase 0x0 ${fw_sz}; " \
  58                                 "sf write ${loadaddr} 0x0 ${filesize}; " \
  59                         "fi; " \
  60                 "fi\0" \
  61         "m4boot=sf probe 0:0; bootaux "__stringify(CONFIG_SYS_AUXCORE_BOOTDATA)"\0"
  62 #else
  63 #define UPDATE_M4_ENV ""
  64 #endif
  65
  66 #define CONFIG_MFG_ENV_SETTINGS \
  67         "mfgtool_args=setenv bootargs console=${console},${baudrate} " \
  68                 "rdinit=/linuxrc " \
  69                 "g_mass_storage.stall=0 g_mass_storage.removable=1 " \
  70                 "g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF "\
  71                 "g_mass_storage.iSerialNumber=\"\" "\
  72                 "clk_ignore_unused "\
  73                 "\0" \
  74         "initrd_addr=0x83800000\0" \
  75         "initrd_high=0xffffffff\0" \
  76         "bootcmd_mfg=run mfgtool_args;bootz ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \
  77
  78 #define CONFIG_DFU_ENV_SETTINGS \
  79         "dfu_alt_info=image raw 0 0x800000;"\
  80                 "u-boot raw 0 0x4000;"\
  81                 "bootimg part 0 1;"\
  82                 "rootfs part 0 2\0" \
  83
  84 #define CONFIG_EXTRA_ENV_SETTINGS \
  85         UPDATE_M4_ENV \
  86         CONFIG_MFG_ENV_SETTINGS \
  87         CONFIG_DFU_ENV_SETTINGS \
  88         "script=boot.scr\0" \
  89         "image=zImage\0" \
  90         "console=ttymxc0\0" \
  91         "fdt_high=0xffffffff\0" \
  92         "initrd_high=0xffffffff\0" \
  93         "fdt_file=imx7d-sdb.dtb\0" \
  94         "fdt_addr=0x83000000\0" \
  95         "boot_fdt=try\0" \
  96         "ip_dyn=yes\0" \
  97         "videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \
  98         "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
  99         "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
 100         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
 101         "mmcautodetect=yes\0" \
 102         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 103                 "root=${mmcroot}\0" \
 104         "loadbootscript=" \
 105                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 106         "bootscript=echo Running bootscript from mmc ...; " \
 107                 "source\0" \
 108         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 109         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 110         "mmcboot=echo Booting from mmc ...; " \
 111                 "run mmcargs; " \
 112                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 113                         "if run loadfdt; then " \
 114                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 115                         "else " \
 116                                 "if test ${boot_fdt} = try; then " \
 117                                         "bootz; " \
 118                                 "else " \
 119                                         "echo WARN: Cannot load the DT; " \
 120                                 "fi; " \
 121                         "fi; " \
 122                 "else " \
 123                         "bootz; " \
 124                 "fi;\0" \
 125         "netargs=setenv bootargs console=${console},${baudrate} " \
 126                 "root=/dev/nfs " \
 127         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 128                 "netboot=echo Booting from net ...; " \
 129                 "run netargs; " \
 130                 "if test ${ip_dyn} = yes; then " \
 131                         "setenv get_cmd dhcp; " \
 132                 "else " \
 133                         "setenv get_cmd tftp; " \
 134                 "fi; " \
 135                 "${get_cmd} ${image}; " \
 136                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 137                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 138                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 139                         "else " \
 140                                 "if test ${boot_fdt} = try; then " \
 141                                         "bootz; " \
 142                                 "else " \
 143                                         "echo WARN: Cannot load the DT; " \
 144                                 "fi; " \
 145                         "fi; " \
 146                 "else " \
 147                         "bootz; " \
 148                 "fi;\0"
 149
 150 #define CONFIG_BOOTCOMMAND \
 151            "mmc dev ${mmcdev};" \
 152            "mmc dev ${mmcdev}; if mmc rescan; then " \
 153                    "if run loadbootscript; then " \
 154                            "run bootscript; " \
 155                    "else " \
 156                            "if run loadimage; then " \
 157                                    "run mmcboot; " \
 158                            "else run netboot; " \
 159                            "fi; " \
 160                    "fi; " \
 161            "else run netboot; fi"
 162
 163 #define CONFIG_SYS_MEMTEST_START        0x80000000
 164 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 0x20000000)
 165
 166 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 167 #define CONFIG_SYS_HZ                   1000
 168
 169 /* Physical Memory Map */
 170 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 171
 172 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 173 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 174 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 175
 176 #define CONFIG_SYS_INIT_SP_OFFSET \
 177         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 178 #define CONFIG_SYS_INIT_SP_ADDR \
 179         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 180
 181 /* environment organization */
 182 #define CONFIG_ENV_SIZE                 SZ_8K
 183
 184 /*
 185  * If want to use nand, define CONFIG_NAND_MXS and rework board
 186  * to support nand, since emmc has pin conflicts with nand
 187  */
 188 #ifdef CONFIG_NAND_MXS
 189 /* NAND stuff */
 190 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 191 #define CONFIG_SYS_NAND_BASE            0x40000000
 192 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 193 #define CONFIG_SYS_NAND_ONFI_DETECTION
 194
 195 /* DMA stuff, needed for GPMI/MXS NAND support */
 196 #endif
 197
 198 #define CONFIG_ENV_OFFSET               (12 * SZ_64K)
 199 #ifdef CONFIG_NAND_MXS
 200 #define CONFIG_SYS_FSL_USDHC_NUM        1
 201 #else
 202 #define CONFIG_SYS_FSL_USDHC_NUM        2
 203 #endif
 204
 205 #define CONFIG_SYS_MMC_ENV_DEV          0   /* USDHC1 */
 206 #define CONFIG_SYS_MMC_ENV_PART         0       /* user area */
 207 #define CONFIG_MMCROOT                  "/dev/mmcblk0p2"  /* USDHC1 */
 208
 209 /* USB Configs */
 210 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 211
 212 #define CONFIG_IMX_THERMAL
 213
 214 #define CONFIG_USBD_HS
 215
 216 #ifdef CONFIG_VIDEO
 217 #define CONFIG_VIDEO_MXS
 218 #define CONFIG_VIDEO_LOGO
 219 #define CONFIG_SPLASH_SCREEN
 220 #define CONFIG_SPLASH_SCREEN_ALIGN
 221 #define CONFIG_BMP_16BPP
 222 #define CONFIG_VIDEO_BMP_RLE8
 223 #define CONFIG_VIDEO_BMP_LOGO
 224 #endif
 225
 226 #ifdef CONFIG_FSL_QSPI
 227 #define CONFIG_SYS_FSL_QSPI_AHB
 228 #define FSL_QSPI_FLASH_NUM              1
 229 #define FSL_QSPI_FLASH_SIZE             SZ_64M
 230 #define QSPI0_BASE_ADDR                 QSPI1_IPS_BASE_ADDR
 231 #define QSPI0_AMBA_BASE                 QSPI0_ARB_BASE_ADDR
 232 #endif
 233
 234 #endif  /* __CONFIG_H */