include/configs/mx7dsabresd.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2015 Freescale Semiconductor, Inc.
   4  *
   5  * Configuration settings for the Freescale i.MX7D SABRESD board.
   6  */
   7
   8 #ifndef __MX7D_SABRESD_CONFIG_H
   9 #define __MX7D_SABRESD_CONFIG_H
  10
  11 #include "mx7_common.h"
  12
  13 #define PHYS_SDRAM_SIZE                 SZ_1G
  14
  15 #define CONFIG_MXC_UART_BASE            UART1_IPS_BASE_ADDR
  16
  17 /* Size of malloc() pool */
  18 #define CONFIG_SYS_MALLOC_LEN           (32 * SZ_1M)
  19
  20 /* Network */
  21 #define CONFIG_FEC_MXC
  22 #define CONFIG_FEC_XCV_TYPE             RGMII
  23 #define CONFIG_ETHPRIME                 "FEC"
  24 #define CONFIG_FEC_MXC_PHYADDR          0
  25
  26 #define CONFIG_PHY_BROADCOM
  27 /* ENET1 */
  28 #define IMX_FEC_BASE                    ENET_IPS_BASE_ADDR
  29
  30 /* MMC Config*/
  31 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  32
  33 /* I2C configs */
  34 #define CONFIG_SYS_I2C_MXC
  35 #define CONFIG_SYS_I2C_SPEED            100000
  36
  37 #define CONFIG_SYS_MMC_IMG_LOAD_PART    1
  38
  39 #ifdef CONFIG_IMX_BOOTAUX
  40 /* Set to QSPI1 A flash at default */
  41 #define CONFIG_SYS_AUXCORE_BOOTDATA 0x60000000
  42
  43 #define UPDATE_M4_ENV \
  44         "m4image=m4_qspi.bin\0" \
  45         "loadm4image=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${m4image}\0" \
  46         "update_m4_from_sd=" \
  47                 "if sf probe 0:0; then " \
  48                         "if run loadm4image; then " \
  49                                 "setexpr fw_sz ${filesize} + 0xffff; " \
  50                                 "setexpr fw_sz ${fw_sz} / 0x10000; "    \
  51                                 "setexpr fw_sz ${fw_sz} * 0x10000; "    \
  52                                 "sf erase 0x0 ${fw_sz}; " \
  53                                 "sf write ${loadaddr} 0x0 ${filesize}; " \
  54                         "fi; " \
  55                 "fi\0" \
  56         "m4boot=sf probe 0:0; bootaux "__stringify(CONFIG_SYS_AUXCORE_BOOTDATA)"\0"
  57 #else
  58 #define UPDATE_M4_ENV ""
  59 #endif
  60
  61 #define CONFIG_MFG_ENV_SETTINGS \
  62         "mfgtool_args=setenv bootargs console=${console},${baudrate} " \
  63                 "rdinit=/linuxrc " \
  64                 "g_mass_storage.stall=0 g_mass_storage.removable=1 " \
  65                 "g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF "\
  66                 "g_mass_storage.iSerialNumber=\"\" "\
  67                 "clk_ignore_unused "\
  68                 "\0" \
  69         "initrd_addr=0x83800000\0" \
  70         "initrd_high=0xffffffff\0" \
  71         "bootcmd_mfg=run mfgtool_args;bootz ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \
  72
  73 #define CONFIG_DFU_ENV_SETTINGS \
  74         "dfu_alt_info=image raw 0 0x800000;"\
  75                 "u-boot raw 0 0x4000;"\
  76                 "bootimg part 0 1;"\
  77                 "rootfs part 0 2\0" \
  78
  79 #define CONFIG_EXTRA_ENV_SETTINGS \
  80         UPDATE_M4_ENV \
  81         CONFIG_MFG_ENV_SETTINGS \
  82         CONFIG_DFU_ENV_SETTINGS \
  83         "script=boot.scr\0" \
  84         "image=zImage\0" \
  85         "console=ttymxc0\0" \
  86         "fdt_high=0xffffffff\0" \
  87         "initrd_high=0xffffffff\0" \
  88         "fdt_file=imx7d-sdb.dtb\0" \
  89         "fdt_addr=0x83000000\0" \
  90         "boot_fdt=try\0" \
  91         "ip_dyn=yes\0" \
  92         "videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \
  93         "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
  94         "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
  95         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
  96         "mmcautodetect=yes\0" \
  97         "mmcargs=setenv bootargs console=${console},${baudrate} " \
  98                 "root=${mmcroot}\0" \
  99         "loadbootscript=" \
 100                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 101         "bootscript=echo Running bootscript from mmc ...; " \
 102                 "source\0" \
 103         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 104         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 105         "mmcboot=echo Booting from mmc ...; " \
 106                 "run mmcargs; " \
 107                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 108                         "if run loadfdt; then " \
 109                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 110                         "else " \
 111                                 "if test ${boot_fdt} = try; then " \
 112                                         "bootz; " \
 113                                 "else " \
 114                                         "echo WARN: Cannot load the DT; " \
 115                                 "fi; " \
 116                         "fi; " \
 117                 "else " \
 118                         "bootz; " \
 119                 "fi;\0" \
 120         "netargs=setenv bootargs console=${console},${baudrate} " \
 121                 "root=/dev/nfs " \
 122         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 123                 "netboot=echo Booting from net ...; " \
 124                 "run netargs; " \
 125                 "if test ${ip_dyn} = yes; then " \
 126                         "setenv get_cmd dhcp; " \
 127                 "else " \
 128                         "setenv get_cmd tftp; " \
 129                 "fi; " \
 130                 "${get_cmd} ${image}; " \
 131                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 132                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 133                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 134                         "else " \
 135                                 "if test ${boot_fdt} = try; then " \
 136                                         "bootz; " \
 137                                 "else " \
 138                                         "echo WARN: Cannot load the DT; " \
 139                                 "fi; " \
 140                         "fi; " \
 141                 "else " \
 142                         "bootz; " \
 143                 "fi;\0"
 144
 145 #define CONFIG_BOOTCOMMAND \
 146            "mmc dev ${mmcdev};" \
 147            "mmc dev ${mmcdev}; if mmc rescan; then " \
 148                    "if run loadbootscript; then " \
 149                            "run bootscript; " \
 150                    "else " \
 151                            "if run loadimage; then " \
 152                                    "run mmcboot; " \
 153                            "else run netboot; " \
 154                            "fi; " \
 155                    "fi; " \
 156            "else run netboot; fi"
 157
 158 #define CONFIG_SYS_MEMTEST_START        0x80000000
 159 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 0x20000000)
 160
 161 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 162 #define CONFIG_SYS_HZ                   1000
 163
 164 /* Physical Memory Map */
 165 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 166
 167 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 168 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 169 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 170
 171 #define CONFIG_SYS_INIT_SP_OFFSET \
 172         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 173 #define CONFIG_SYS_INIT_SP_ADDR \
 174         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 175
 176 /* environment organization */
 177
 178 /*
 179  * If want to use nand, define CONFIG_NAND_MXS and rework board
 180  * to support nand, since emmc has pin conflicts with nand
 181  */
 182 #ifdef CONFIG_NAND_MXS
 183 /* NAND stuff */
 184 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 185 #define CONFIG_SYS_NAND_BASE            0x40000000
 186 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 187 #define CONFIG_SYS_NAND_ONFI_DETECTION
 188
 189 /* DMA stuff, needed for GPMI/MXS NAND support */
 190 #endif
 191
 192 #ifdef CONFIG_NAND_MXS
 193 #define CONFIG_SYS_FSL_USDHC_NUM        1
 194 #else
 195 #define CONFIG_SYS_FSL_USDHC_NUM        2
 196 #endif
 197
 198 #define CONFIG_SYS_MMC_ENV_DEV          0   /* USDHC1 */
 199 #define CONFIG_SYS_MMC_ENV_PART         0       /* user area */
 200 #define CONFIG_MMCROOT                  "/dev/mmcblk0p2"  /* USDHC1 */
 201
 202 /* USB Configs */
 203 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 204
 205 #define CONFIG_IMX_THERMAL
 206
 207 #define CONFIG_USBD_HS
 208
 209 #ifdef CONFIG_VIDEO
 210 #define CONFIG_VIDEO_MXS
 211 #define CONFIG_VIDEO_LOGO
 212 #define CONFIG_SPLASH_SCREEN
 213 #define CONFIG_SPLASH_SCREEN_ALIGN
 214 #define CONFIG_BMP_16BPP
 215 #define CONFIG_VIDEO_BMP_RLE8
 216 #define CONFIG_VIDEO_BMP_LOGO
 217 #endif
 218
 219 #ifdef CONFIG_FSL_QSPI
 220 #define CONFIG_SYS_FSL_QSPI_AHB
 221 #define FSL_QSPI_FLASH_NUM              1
 222 #define FSL_QSPI_FLASH_SIZE             SZ_64M
 223 #define QSPI0_BASE_ADDR                 QSPI1_IPS_BASE_ADDR
 224 #define QSPI0_AMBA_BASE                 QSPI0_ARB_BASE_ADDR
 225 #endif
 226
 227 #endif  /* __CONFIG_H */