Convert CONFIG_SUPPORT_EMMC_BOOT to Kconfig
[platform/kernel/u-boot.git] / include / configs / mx7dsabresd.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright (C) 2015 Freescale Semiconductor, Inc.
4  *
5  * Configuration settings for the Freescale i.MX7D SABRESD board.
6  */
7
8 #ifndef __MX7D_SABRESD_CONFIG_H
9 #define __MX7D_SABRESD_CONFIG_H
10
11 #include "mx7_common.h"
12
13 #define PHYS_SDRAM_SIZE                 SZ_1G
14
15 #define CONFIG_MXC_UART_BASE            UART1_IPS_BASE_ADDR
16
17 /* Size of malloc() pool */
18 #define CONFIG_SYS_MALLOC_LEN           (32 * SZ_1M)
19
20 /* Network */
21 #define CONFIG_FEC_MXC
22 #define CONFIG_FEC_XCV_TYPE             RGMII
23 #define CONFIG_ETHPRIME                 "FEC"
24 #define CONFIG_FEC_MXC_PHYADDR          0
25
26 #define CONFIG_PHY_BROADCOM
27 /* ENET1 */
28 #define IMX_FEC_BASE                    ENET_IPS_BASE_ADDR
29
30 /* MMC Config*/
31 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
32
33 #undef CONFIG_BOOTM_NETBSD
34 #undef CONFIG_BOOTM_PLAN9
35 #undef CONFIG_BOOTM_RTEMS
36
37 /* I2C configs */
38 #define CONFIG_SYS_I2C_MXC
39 #define CONFIG_SYS_I2C_SPEED            100000
40
41 #define CONFIG_SYS_MMC_IMG_LOAD_PART    1
42
43 #ifdef CONFIG_IMX_BOOTAUX
44 /* Set to QSPI1 A flash at default */
45 #define CONFIG_SYS_AUXCORE_BOOTDATA 0x60000000
46
47 #define UPDATE_M4_ENV \
48         "m4image=m4_qspi.bin\0" \
49         "loadm4image=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${m4image}\0" \
50         "update_m4_from_sd=" \
51                 "if sf probe 0:0; then " \
52                         "if run loadm4image; then " \
53                                 "setexpr fw_sz ${filesize} + 0xffff; " \
54                                 "setexpr fw_sz ${fw_sz} / 0x10000; "    \
55                                 "setexpr fw_sz ${fw_sz} * 0x10000; "    \
56                                 "sf erase 0x0 ${fw_sz}; " \
57                                 "sf write ${loadaddr} 0x0 ${filesize}; " \
58                         "fi; " \
59                 "fi\0" \
60         "m4boot=sf probe 0:0; bootaux "__stringify(CONFIG_SYS_AUXCORE_BOOTDATA)"\0"
61 #else
62 #define UPDATE_M4_ENV ""
63 #endif
64
65 #define CONFIG_MFG_ENV_SETTINGS \
66         "mfgtool_args=setenv bootargs console=${console},${baudrate} " \
67                 "rdinit=/linuxrc " \
68                 "g_mass_storage.stall=0 g_mass_storage.removable=1 " \
69                 "g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF "\
70                 "g_mass_storage.iSerialNumber=\"\" "\
71                 "clk_ignore_unused "\
72                 "\0" \
73         "initrd_addr=0x83800000\0" \
74         "initrd_high=0xffffffff\0" \
75         "bootcmd_mfg=run mfgtool_args;bootz ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \
76
77 #define CONFIG_DFU_ENV_SETTINGS \
78         "dfu_alt_info=image raw 0 0x800000;"\
79                 "u-boot raw 0 0x4000;"\
80                 "bootimg part 0 1;"\
81                 "rootfs part 0 2\0" \
82
83 #define CONFIG_EXTRA_ENV_SETTINGS \
84         UPDATE_M4_ENV \
85         CONFIG_MFG_ENV_SETTINGS \
86         CONFIG_DFU_ENV_SETTINGS \
87         "script=boot.scr\0" \
88         "image=zImage\0" \
89         "console=ttymxc0\0" \
90         "fdt_high=0xffffffff\0" \
91         "initrd_high=0xffffffff\0" \
92         "fdt_file=imx7d-sdb.dtb\0" \
93         "fdt_addr=0x83000000\0" \
94         "boot_fdt=try\0" \
95         "ip_dyn=yes\0" \
96         "videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \
97         "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
98         "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
99         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
100         "mmcautodetect=yes\0" \
101         "mmcargs=setenv bootargs console=${console},${baudrate} " \
102                 "root=${mmcroot}\0" \
103         "loadbootscript=" \
104                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
105         "bootscript=echo Running bootscript from mmc ...; " \
106                 "source\0" \
107         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
108         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
109         "mmcboot=echo Booting from mmc ...; " \
110                 "run mmcargs; " \
111                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
112                         "if run loadfdt; then " \
113                                 "bootz ${loadaddr} - ${fdt_addr}; " \
114                         "else " \
115                                 "if test ${boot_fdt} = try; then " \
116                                         "bootz; " \
117                                 "else " \
118                                         "echo WARN: Cannot load the DT; " \
119                                 "fi; " \
120                         "fi; " \
121                 "else " \
122                         "bootz; " \
123                 "fi;\0" \
124         "netargs=setenv bootargs console=${console},${baudrate} " \
125                 "root=/dev/nfs " \
126         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
127                 "netboot=echo Booting from net ...; " \
128                 "run netargs; " \
129                 "if test ${ip_dyn} = yes; then " \
130                         "setenv get_cmd dhcp; " \
131                 "else " \
132                         "setenv get_cmd tftp; " \
133                 "fi; " \
134                 "${get_cmd} ${image}; " \
135                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
136                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
137                                 "bootz ${loadaddr} - ${fdt_addr}; " \
138                         "else " \
139                                 "if test ${boot_fdt} = try; then " \
140                                         "bootz; " \
141                                 "else " \
142                                         "echo WARN: Cannot load the DT; " \
143                                 "fi; " \
144                         "fi; " \
145                 "else " \
146                         "bootz; " \
147                 "fi;\0"
148
149 #define CONFIG_BOOTCOMMAND \
150            "mmc dev ${mmcdev};" \
151            "mmc dev ${mmcdev}; if mmc rescan; then " \
152                    "if run loadbootscript; then " \
153                            "run bootscript; " \
154                    "else " \
155                            "if run loadimage; then " \
156                                    "run mmcboot; " \
157                            "else run netboot; " \
158                            "fi; " \
159                    "fi; " \
160            "else run netboot; fi"
161
162 #define CONFIG_SYS_MEMTEST_START        0x80000000
163 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 0x20000000)
164
165 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
166 #define CONFIG_SYS_HZ                   1000
167
168 /* Physical Memory Map */
169 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
170
171 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
172 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
173 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
174
175 #define CONFIG_SYS_INIT_SP_OFFSET \
176         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
177 #define CONFIG_SYS_INIT_SP_ADDR \
178         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
179
180 /* environment organization */
181 #define CONFIG_ENV_SIZE                 SZ_8K
182
183 /*
184  * If want to use nand, define CONFIG_NAND_MXS and rework board
185  * to support nand, since emmc has pin conflicts with nand
186  */
187 #ifdef CONFIG_NAND_MXS
188 /* NAND stuff */
189 #define CONFIG_SYS_MAX_NAND_DEVICE      1
190 #define CONFIG_SYS_NAND_BASE            0x40000000
191 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
192 #define CONFIG_SYS_NAND_ONFI_DETECTION
193
194 /* DMA stuff, needed for GPMI/MXS NAND support */
195 #endif
196
197 #define CONFIG_ENV_OFFSET               (12 * SZ_64K)
198 #ifdef CONFIG_NAND_MXS
199 #define CONFIG_SYS_FSL_USDHC_NUM        1
200 #else
201 #define CONFIG_SYS_FSL_USDHC_NUM        2
202 #endif
203
204 #define CONFIG_SYS_MMC_ENV_DEV          0   /* USDHC1 */
205 #define CONFIG_SYS_MMC_ENV_PART         0       /* user area */
206 #define CONFIG_MMCROOT                  "/dev/mmcblk0p2"  /* USDHC1 */
207
208 /* USB Configs */
209 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
210
211 #define CONFIG_IMX_THERMAL
212
213 #define CONFIG_USBD_HS
214
215 #ifdef CONFIG_VIDEO
216 #define CONFIG_VIDEO_MXS
217 #define CONFIG_VIDEO_LOGO
218 #define CONFIG_SPLASH_SCREEN
219 #define CONFIG_SPLASH_SCREEN_ALIGN
220 #define CONFIG_BMP_16BPP
221 #define CONFIG_VIDEO_BMP_RLE8
222 #define CONFIG_VIDEO_BMP_LOGO
223 #endif
224
225 #ifdef CONFIG_FSL_QSPI
226 #define CONFIG_SYS_FSL_QSPI_AHB
227 #define FSL_QSPI_FLASH_NUM              1
228 #define FSL_QSPI_FLASH_SIZE             SZ_64M
229 #define QSPI0_BASE_ADDR                 QSPI1_IPS_BASE_ADDR
230 #define QSPI0_AMBA_BASE                 QSPI0_ARB_BASE_ADDR
231 #endif
232
233 #endif  /* __CONFIG_H */