include/configs/mx7dsabresd.h

   1 /*
   2  * Copyright (C) 2015 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Freescale i.MX7D SABRESD board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __MX7D_SABRESD_CONFIG_H
  10 #define __MX7D_SABRESD_CONFIG_H
  11
  12 #include "mx7_common.h"
  13
  14 #define CONFIG_DBG_MONITOR
  15 #define PHYS_SDRAM_SIZE                 SZ_1G
  16
  17 /* Uncomment to enable secure boot support */
  18 /* #define CONFIG_SECURE_BOOT */
  19 #define CONFIG_CSF_SIZE                 0x4000
  20
  21 /* Network */
  22 #define CONFIG_CMD_MII
  23 #define CONFIG_FEC_MXC
  24 #define CONFIG_MII
  25 #define CONFIG_FEC_XCV_TYPE             RGMII
  26 #define CONFIG_ETHPRIME                 "FEC"
  27 #define CONFIG_FEC_MXC_PHYADDR          0
  28
  29 #define CONFIG_PHYLIB
  30 #define CONFIG_PHY_BROADCOM
  31 /* ENET1 */
  32 #define IMX_FEC_BASE                    ENET_IPS_BASE_ADDR
  33
  34 /* MMC Config*/
  35 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  36
  37 /* PMIC */
  38 #define CONFIG_POWER
  39 #define CONFIG_POWER_I2C
  40 #define CONFIG_POWER_PFUZE3000
  41 #define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08
  42
  43 #undef CONFIG_BOOTM_NETBSD
  44 #undef CONFIG_BOOTM_PLAN9
  45 #undef CONFIG_BOOTM_RTEMS
  46
  47 #undef CONFIG_CMD_EXPORTENV
  48 #undef CONFIG_CMD_IMPORTENV
  49
  50 /* I2C configs */
  51 #define CONFIG_CMD_I2C
  52 #define CONFIG_SYS_I2C
  53 #define CONFIG_SYS_I2C_MXC
  54 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  55 #define CONFIG_SYS_I2C_SPEED            100000
  56
  57 #define CONFIG_SUPPORT_EMMC_BOOT        /* eMMC specific */
  58 #define CONFIG_SYS_MMC_IMG_LOAD_PART    1
  59
  60 #define CONFIG_MFG_ENV_SETTINGS \
  61         "mfgtool_args=setenv bootargs console=${console},${baudrate} " \
  62                 "rdinit=/linuxrc " \
  63                 "g_mass_storage.stall=0 g_mass_storage.removable=1 " \
  64                 "g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF "\
  65                 "g_mass_storage.iSerialNumber=\"\" "\
  66                 "clk_ignore_unused "\
  67                 "\0" \
  68         "initrd_addr=0x83800000\0" \
  69         "initrd_high=0xffffffff\0" \
  70         "bootcmd_mfg=run mfgtool_args;bootz ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \
  71
  72 #define CONFIG_EXTRA_ENV_SETTINGS \
  73         CONFIG_MFG_ENV_SETTINGS \
  74         "script=boot.scr\0" \
  75         "image=zImage\0" \
  76         "console=ttymxc0\0" \
  77         "fdt_high=0xffffffff\0" \
  78         "initrd_high=0xffffffff\0" \
  79         "fdt_file=imx7d-sdb.dtb\0" \
  80         "fdt_addr=0x83000000\0" \
  81         "boot_fdt=try\0" \
  82         "ip_dyn=yes\0" \
  83         "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
  84         "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
  85         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
  86         "mmcautodetect=yes\0" \
  87         "mmcargs=setenv bootargs console=${console},${baudrate} " \
  88                 "root=${mmcroot}\0" \
  89         "loadbootscript=" \
  90                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
  91         "bootscript=echo Running bootscript from mmc ...; " \
  92                 "source\0" \
  93         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
  94         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
  95         "mmcboot=echo Booting from mmc ...; " \
  96                 "run mmcargs; " \
  97                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
  98                         "if run loadfdt; then " \
  99                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 100                         "else " \
 101                                 "if test ${boot_fdt} = try; then " \
 102                                         "bootz; " \
 103                                 "else " \
 104                                         "echo WARN: Cannot load the DT; " \
 105                                 "fi; " \
 106                         "fi; " \
 107                 "else " \
 108                         "bootz; " \
 109                 "fi;\0" \
 110         "netargs=setenv bootargs console=${console},${baudrate} " \
 111                 "root=/dev/nfs " \
 112         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 113                 "netboot=echo Booting from net ...; " \
 114                 "run netargs; " \
 115                 "if test ${ip_dyn} = yes; then " \
 116                         "setenv get_cmd dhcp; " \
 117                 "else " \
 118                         "setenv get_cmd tftp; " \
 119                 "fi; " \
 120                 "${get_cmd} ${image}; " \
 121                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 122                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 123                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 124                         "else " \
 125                                 "if test ${boot_fdt} = try; then " \
 126                                         "bootz; " \
 127                                 "else " \
 128                                         "echo WARN: Cannot load the DT; " \
 129                                 "fi; " \
 130                         "fi; " \
 131                 "else " \
 132                         "bootz; " \
 133                 "fi;\0"
 134
 135 #define CONFIG_BOOTCOMMAND \
 136            "mmc dev ${mmcdev};" \
 137            "mmc dev ${mmcdev}; if mmc rescan; then " \
 138                    "if run loadbootscript; then " \
 139                            "run bootscript; " \
 140                    "else " \
 141                            "if run loadimage; then " \
 142                                    "run mmcboot; " \
 143                            "else run netboot; " \
 144                            "fi; " \
 145                    "fi; " \
 146            "else run netboot; fi"
 147
 148 #define CONFIG_CMD_MEMTEST
 149 #define CONFIG_SYS_MEMTEST_START        0x80000000
 150 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 0x20000000)
 151
 152 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 153 #define CONFIG_SYS_HZ                   1000
 154
 155 #define CONFIG_STACKSIZE                SZ_128K
 156
 157 /* Physical Memory Map */
 158 #define CONFIG_NR_DRAM_BANKS            1
 159 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 160
 161 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 162 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 163 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 164
 165 #define CONFIG_SYS_INIT_SP_OFFSET \
 166         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 167 #define CONFIG_SYS_INIT_SP_ADDR \
 168         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 169
 170 /* FLASH and environment organization */
 171 #define CONFIG_SYS_NO_FLASH
 172 #define CONFIG_ENV_SIZE                 SZ_8K
 173 #define CONFIG_ENV_IS_IN_MMC
 174 #define CONFIG_ENV_OFFSET               (8 * SZ_64K)
 175 #define CONFIG_SYS_FSL_USDHC_NUM        2
 176
 177 #define CONFIG_SYS_MMC_ENV_DEV          0   /* USDHC1 */
 178 #define CONFIG_SYS_MMC_ENV_PART         0       /* user area */
 179 #define CONFIG_MMCROOT                  "/dev/mmcblk0p2"  /* USDHC1 */
 180
 181 /* USB Configs */
 182 #define CONFIG_CMD_USB
 183 #define CONFIG_USB_EHCI
 184 #define CONFIG_USB_EHCI_MX7
 185 #define CONFIG_USB_STORAGE
 186 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 187 #define CONFIG_USB_HOST_ETHER
 188 #define CONFIG_USB_ETHER_ASIX
 189 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 190 #define CONFIG_MXC_USB_FLAGS   0
 191 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 192
 193 #define CONFIG_IMX_THERMAL
 194
 195 #endif  /* __CONFIG_H */