Merge branch 'master' of git://www.denx.de/git/u-boot-imx
[platform/kernel/u-boot.git] / include / configs / mx7dsabresd.h
1 /*
2  * Copyright (C) 2015 Freescale Semiconductor, Inc.
3  *
4  * Configuration settings for the Freescale i.MX7D SABRESD board.
5  *
6  * SPDX-License-Identifier:     GPL-2.0+
7  */
8
9 #ifndef __MX7D_SABRESD_CONFIG_H
10 #define __MX7D_SABRESD_CONFIG_H
11
12 #include "mx7_common.h"
13
14 #define CONFIG_DBG_MONITOR
15 #define PHYS_SDRAM_SIZE                 SZ_1G
16
17 #define CONFIG_MXC_UART_BASE            UART1_IPS_BASE_ADDR
18
19 /* Size of malloc() pool */
20 #define CONFIG_SYS_MALLOC_LEN           (32 * SZ_1M)
21
22 #define CONFIG_BOARD_EARLY_INIT_F
23 #define CONFIG_BOARD_LATE_INIT
24
25 /* Network */
26 #define CONFIG_FEC_MXC
27 #define CONFIG_MII
28 #define CONFIG_FEC_XCV_TYPE             RGMII
29 #define CONFIG_ETHPRIME                 "FEC"
30 #define CONFIG_FEC_MXC_PHYADDR          0
31
32 #define CONFIG_PHYLIB
33 #define CONFIG_PHY_BROADCOM
34 /* ENET1 */
35 #define IMX_FEC_BASE                    ENET_IPS_BASE_ADDR
36
37 /* MMC Config*/
38 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
39
40 /* PMIC */
41 #define CONFIG_POWER
42 #define CONFIG_POWER_I2C
43 #define CONFIG_POWER_PFUZE3000
44 #define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08
45
46 #undef CONFIG_BOOTM_NETBSD
47 #undef CONFIG_BOOTM_PLAN9
48 #undef CONFIG_BOOTM_RTEMS
49
50 /* I2C configs */
51 #define CONFIG_SYS_I2C
52 #define CONFIG_SYS_I2C_MXC
53 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
54 #define CONFIG_SYS_I2C_SPEED            100000
55
56 #define CONFIG_SUPPORT_EMMC_BOOT        /* eMMC specific */
57 #define CONFIG_SYS_MMC_IMG_LOAD_PART    1
58
59 #ifdef CONFIG_IMX_BOOTAUX
60 /* Set to QSPI1 A flash at default */
61 #define CONFIG_SYS_AUXCORE_BOOTDATA 0x60000000
62
63 #define UPDATE_M4_ENV \
64         "m4image=m4_qspi.bin\0" \
65         "loadm4image=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${m4image}\0" \
66         "update_m4_from_sd=" \
67                 "if sf probe 0:0; then " \
68                         "if run loadm4image; then " \
69                                 "setexpr fw_sz ${filesize} + 0xffff; " \
70                                 "setexpr fw_sz ${fw_sz} / 0x10000; "    \
71                                 "setexpr fw_sz ${fw_sz} * 0x10000; "    \
72                                 "sf erase 0x0 ${fw_sz}; " \
73                                 "sf write ${loadaddr} 0x0 ${filesize}; " \
74                         "fi; " \
75                 "fi\0" \
76         "m4boot=sf probe 0:0; bootaux "__stringify(CONFIG_SYS_AUXCORE_BOOTDATA)"\0"
77 #else
78 #define UPDATE_M4_ENV ""
79 #endif
80
81 #define CONFIG_MFG_ENV_SETTINGS \
82         "mfgtool_args=setenv bootargs console=${console},${baudrate} " \
83                 "rdinit=/linuxrc " \
84                 "g_mass_storage.stall=0 g_mass_storage.removable=1 " \
85                 "g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF "\
86                 "g_mass_storage.iSerialNumber=\"\" "\
87                 "clk_ignore_unused "\
88                 "\0" \
89         "initrd_addr=0x83800000\0" \
90         "initrd_high=0xffffffff\0" \
91         "bootcmd_mfg=run mfgtool_args;bootz ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \
92
93 #define CONFIG_DFU_ENV_SETTINGS \
94         "dfu_alt_info=image raw 0 0x800000;"\
95                 "u-boot raw 0 0x4000;"\
96                 "bootimg part 0 1;"\
97                 "rootfs part 0 2\0" \
98
99 #define CONFIG_EXTRA_ENV_SETTINGS \
100         UPDATE_M4_ENV \
101         CONFIG_MFG_ENV_SETTINGS \
102         CONFIG_DFU_ENV_SETTINGS \
103         "script=boot.scr\0" \
104         "image=zImage\0" \
105         "console=ttymxc0\0" \
106         "fdt_high=0xffffffff\0" \
107         "initrd_high=0xffffffff\0" \
108         "fdt_file=imx7d-sdb.dtb\0" \
109         "fdt_addr=0x83000000\0" \
110         "boot_fdt=try\0" \
111         "ip_dyn=yes\0" \
112         "videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \
113         "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
114         "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
115         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
116         "mmcautodetect=yes\0" \
117         "mmcargs=setenv bootargs console=${console},${baudrate} " \
118                 "root=${mmcroot}\0" \
119         "loadbootscript=" \
120                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
121         "bootscript=echo Running bootscript from mmc ...; " \
122                 "source\0" \
123         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
124         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
125         "mmcboot=echo Booting from mmc ...; " \
126                 "run mmcargs; " \
127                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
128                         "if run loadfdt; then " \
129                                 "bootz ${loadaddr} - ${fdt_addr}; " \
130                         "else " \
131                                 "if test ${boot_fdt} = try; then " \
132                                         "bootz; " \
133                                 "else " \
134                                         "echo WARN: Cannot load the DT; " \
135                                 "fi; " \
136                         "fi; " \
137                 "else " \
138                         "bootz; " \
139                 "fi;\0" \
140         "netargs=setenv bootargs console=${console},${baudrate} " \
141                 "root=/dev/nfs " \
142         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
143                 "netboot=echo Booting from net ...; " \
144                 "run netargs; " \
145                 "if test ${ip_dyn} = yes; then " \
146                         "setenv get_cmd dhcp; " \
147                 "else " \
148                         "setenv get_cmd tftp; " \
149                 "fi; " \
150                 "${get_cmd} ${image}; " \
151                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
152                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
153                                 "bootz ${loadaddr} - ${fdt_addr}; " \
154                         "else " \
155                                 "if test ${boot_fdt} = try; then " \
156                                         "bootz; " \
157                                 "else " \
158                                         "echo WARN: Cannot load the DT; " \
159                                 "fi; " \
160                         "fi; " \
161                 "else " \
162                         "bootz; " \
163                 "fi;\0"
164
165 #define CONFIG_BOOTCOMMAND \
166            "mmc dev ${mmcdev};" \
167            "mmc dev ${mmcdev}; if mmc rescan; then " \
168                    "if run loadbootscript; then " \
169                            "run bootscript; " \
170                    "else " \
171                            "if run loadimage; then " \
172                                    "run mmcboot; " \
173                            "else run netboot; " \
174                            "fi; " \
175                    "fi; " \
176            "else run netboot; fi"
177
178 #define CONFIG_SYS_MEMTEST_START        0x80000000
179 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 0x20000000)
180
181 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
182 #define CONFIG_SYS_HZ                   1000
183
184 #define CONFIG_STACKSIZE                SZ_128K
185
186 /* Physical Memory Map */
187 #define CONFIG_NR_DRAM_BANKS            1
188 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
189
190 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
191 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
192 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
193
194 #define CONFIG_SYS_INIT_SP_OFFSET \
195         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
196 #define CONFIG_SYS_INIT_SP_ADDR \
197         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
198
199 /* FLASH and environment organization */
200 #define CONFIG_SYS_NO_FLASH
201 #define CONFIG_ENV_SIZE                 SZ_8K
202 #define CONFIG_ENV_IS_IN_MMC
203
204 /*
205  * If want to use nand, define CONFIG_NAND_MXS and rework board
206  * to support nand, since emmc has pin conflicts with nand
207  */
208 #ifdef CONFIG_NAND_MXS
209 #define CONFIG_CMD_NAND
210 #define CONFIG_CMD_NAND_TRIMFFS
211
212 /* NAND stuff */
213 #define CONFIG_SYS_MAX_NAND_DEVICE      1
214 #define CONFIG_SYS_NAND_BASE            0x40000000
215 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
216 #define CONFIG_SYS_NAND_ONFI_DETECTION
217
218 /* DMA stuff, needed for GPMI/MXS NAND support */
219 #define CONFIG_APBH_DMA
220 #define CONFIG_APBH_DMA_BURST
221 #define CONFIG_APBH_DMA_BURST8
222 #endif
223
224 #define CONFIG_ENV_OFFSET               (8 * SZ_64K)
225 #ifdef CONFIG_NAND_MXS
226 #define CONFIG_SYS_FSL_USDHC_NUM        1
227 #else
228 #define CONFIG_SYS_FSL_USDHC_NUM        2
229 #endif
230
231 #define CONFIG_SYS_MMC_ENV_DEV          0   /* USDHC1 */
232 #define CONFIG_SYS_MMC_ENV_PART         0       /* user area */
233 #define CONFIG_MMCROOT                  "/dev/mmcblk0p2"  /* USDHC1 */
234
235 /* USB Configs */
236 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
237 #define CONFIG_USB_HOST_ETHER
238 #define CONFIG_USB_ETHER_ASIX
239 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
240 #define CONFIG_MXC_USB_FLAGS   0
241 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
242
243 #define CONFIG_IMX_THERMAL
244
245 #define CONFIG_USBD_HS
246
247 #define CONFIG_USB_FUNCTION_MASS_STORAGE
248
249 #ifdef CONFIG_VIDEO
250 #define CONFIG_VIDEO_MXS
251 #define CONFIG_VIDEO_LOGO
252 #define CONFIG_SPLASH_SCREEN
253 #define CONFIG_SPLASH_SCREEN_ALIGN
254 #define CONFIG_CMD_BMP
255 #define CONFIG_BMP_16BPP
256 #define CONFIG_VIDEO_BMP_RLE8
257 #define CONFIG_VIDEO_BMP_LOGO
258 #endif
259
260 #ifdef CONFIG_FSL_QSPI
261 #define CONFIG_SPI_FLASH
262 #define CONFIG_SPI_FLASH_MACRONIX
263 #define CONFIG_SPI_FLASH_BAR
264 #define CONFIG_SF_DEFAULT_BUS           0
265 #define CONFIG_SF_DEFAULT_CS            0
266 #define CONFIG_SF_DEFAULT_SPEED         40000000
267 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
268 #define FSL_QSPI_FLASH_NUM              1
269 #define FSL_QSPI_FLASH_SIZE             SZ_64M
270 #define QSPI0_BASE_ADDR                 QSPI1_IPS_BASE_ADDR
271 #define QSPI0_AMBA_BASE                 QSPI0_ARB_BASE_ADDR
272 #endif
273
274 #endif  /* __CONFIG_H */