include/configs/mx7dsabresd.h

   1 /*
   2  * Copyright (C) 2015 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Freescale i.MX7D SABRESD board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __MX7D_SABRESD_CONFIG_H
  10 #define __MX7D_SABRESD_CONFIG_H
  11
  12 #include "mx7_common.h"
  13
  14 #define CONFIG_DBG_MONITOR
  15 #define PHYS_SDRAM_SIZE                 SZ_1G
  16
  17 #define CONFIG_MXC_UART_BASE            UART1_IPS_BASE_ADDR
  18
  19 /* Size of malloc() pool */
  20 #define CONFIG_SYS_MALLOC_LEN           (32 * SZ_1M)
  21
  22 #define CONFIG_BOARD_EARLY_INIT_F
  23 #define CONFIG_BOARD_LATE_INIT
  24
  25 /* Network */
  26 #define CONFIG_FEC_MXC
  27 #define CONFIG_MII
  28 #define CONFIG_FEC_XCV_TYPE             RGMII
  29 #define CONFIG_ETHPRIME                 "FEC"
  30 #define CONFIG_FEC_MXC_PHYADDR          0
  31
  32 #define CONFIG_PHYLIB
  33 #define CONFIG_PHY_BROADCOM
  34 /* ENET1 */
  35 #define IMX_FEC_BASE                    ENET_IPS_BASE_ADDR
  36
  37 /* MMC Config*/
  38 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  39
  40 /* PMIC */
  41 #define CONFIG_POWER
  42 #define CONFIG_POWER_I2C
  43 #define CONFIG_POWER_PFUZE3000
  44 #define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08
  45
  46 #undef CONFIG_BOOTM_NETBSD
  47 #undef CONFIG_BOOTM_PLAN9
  48 #undef CONFIG_BOOTM_RTEMS
  49
  50 /* I2C configs */
  51 #define CONFIG_SYS_I2C
  52 #define CONFIG_SYS_I2C_MXC
  53 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  54 #define CONFIG_SYS_I2C_SPEED            100000
  55
  56 #define CONFIG_SUPPORT_EMMC_BOOT        /* eMMC specific */
  57 #define CONFIG_SYS_MMC_IMG_LOAD_PART    1
  58
  59 #ifdef CONFIG_IMX_BOOTAUX
  60 /* Set to QSPI1 A flash at default */
  61 #define CONFIG_SYS_AUXCORE_BOOTDATA 0x60000000
  62
  63 #define UPDATE_M4_ENV \
  64         "m4image=m4_qspi.bin\0" \
  65         "loadm4image=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${m4image}\0" \
  66         "update_m4_from_sd=" \
  67                 "if sf probe 0:0; then " \
  68                         "if run loadm4image; then " \
  69                                 "setexpr fw_sz ${filesize} + 0xffff; " \
  70                                 "setexpr fw_sz ${fw_sz} / 0x10000; "    \
  71                                 "setexpr fw_sz ${fw_sz} * 0x10000; "    \
  72                                 "sf erase 0x0 ${fw_sz}; " \
  73                                 "sf write ${loadaddr} 0x0 ${filesize}; " \
  74                         "fi; " \
  75                 "fi\0" \
  76         "m4boot=sf probe 0:0; bootaux "__stringify(CONFIG_SYS_AUXCORE_BOOTDATA)"\0"
  77 #else
  78 #define UPDATE_M4_ENV ""
  79 #endif
  80
  81 #define CONFIG_MFG_ENV_SETTINGS \
  82         "mfgtool_args=setenv bootargs console=${console},${baudrate} " \
  83                 "rdinit=/linuxrc " \
  84                 "g_mass_storage.stall=0 g_mass_storage.removable=1 " \
  85                 "g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF "\
  86                 "g_mass_storage.iSerialNumber=\"\" "\
  87                 "clk_ignore_unused "\
  88                 "\0" \
  89         "initrd_addr=0x83800000\0" \
  90         "initrd_high=0xffffffff\0" \
  91         "bootcmd_mfg=run mfgtool_args;bootz ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \
  92
  93 #define CONFIG_DFU_ENV_SETTINGS \
  94         "dfu_alt_info=image raw 0 0x800000;"\
  95                 "u-boot raw 0 0x4000;"\
  96                 "bootimg part 0 1;"\
  97                 "rootfs part 0 2\0" \
  98
  99 #define CONFIG_EXTRA_ENV_SETTINGS \
 100         UPDATE_M4_ENV \
 101         CONFIG_MFG_ENV_SETTINGS \
 102         CONFIG_DFU_ENV_SETTINGS \
 103         "script=boot.scr\0" \
 104         "image=zImage\0" \
 105         "console=ttymxc0\0" \
 106         "fdt_high=0xffffffff\0" \
 107         "initrd_high=0xffffffff\0" \
 108         "fdt_file=imx7d-sdb.dtb\0" \
 109         "fdt_addr=0x83000000\0" \
 110         "boot_fdt=try\0" \
 111         "ip_dyn=yes\0" \
 112         "videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \
 113         "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
 114         "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
 115         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
 116         "mmcautodetect=yes\0" \
 117         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 118                 "root=${mmcroot}\0" \
 119         "loadbootscript=" \
 120                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 121         "bootscript=echo Running bootscript from mmc ...; " \
 122                 "source\0" \
 123         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 124         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 125         "mmcboot=echo Booting from mmc ...; " \
 126                 "run mmcargs; " \
 127                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 128                         "if run loadfdt; then " \
 129                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 130                         "else " \
 131                                 "if test ${boot_fdt} = try; then " \
 132                                         "bootz; " \
 133                                 "else " \
 134                                         "echo WARN: Cannot load the DT; " \
 135                                 "fi; " \
 136                         "fi; " \
 137                 "else " \
 138                         "bootz; " \
 139                 "fi;\0" \
 140         "netargs=setenv bootargs console=${console},${baudrate} " \
 141                 "root=/dev/nfs " \
 142         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 143                 "netboot=echo Booting from net ...; " \
 144                 "run netargs; " \
 145                 "if test ${ip_dyn} = yes; then " \
 146                         "setenv get_cmd dhcp; " \
 147                 "else " \
 148                         "setenv get_cmd tftp; " \
 149                 "fi; " \
 150                 "${get_cmd} ${image}; " \
 151                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 152                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 153                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 154                         "else " \
 155                                 "if test ${boot_fdt} = try; then " \
 156                                         "bootz; " \
 157                                 "else " \
 158                                         "echo WARN: Cannot load the DT; " \
 159                                 "fi; " \
 160                         "fi; " \
 161                 "else " \
 162                         "bootz; " \
 163                 "fi;\0"
 164
 165 #define CONFIG_BOOTCOMMAND \
 166            "mmc dev ${mmcdev};" \
 167            "mmc dev ${mmcdev}; if mmc rescan; then " \
 168                    "if run loadbootscript; then " \
 169                            "run bootscript; " \
 170                    "else " \
 171                            "if run loadimage; then " \
 172                                    "run mmcboot; " \
 173                            "else run netboot; " \
 174                            "fi; " \
 175                    "fi; " \
 176            "else run netboot; fi"
 177
 178 #define CONFIG_SYS_MEMTEST_START        0x80000000
 179 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 0x20000000)
 180
 181 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 182 #define CONFIG_SYS_HZ                   1000
 183
 184 #define CONFIG_STACKSIZE                SZ_128K
 185
 186 /* Physical Memory Map */
 187 #define CONFIG_NR_DRAM_BANKS            1
 188 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 189
 190 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 191 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 192 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 193
 194 #define CONFIG_SYS_INIT_SP_OFFSET \
 195         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 196 #define CONFIG_SYS_INIT_SP_ADDR \
 197         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 198
 199 /* FLASH and environment organization */
 200 #define CONFIG_SYS_NO_FLASH
 201 #define CONFIG_ENV_SIZE                 SZ_8K
 202 #define CONFIG_ENV_IS_IN_MMC
 203
 204 /*
 205  * If want to use nand, define CONFIG_NAND_MXS and rework board
 206  * to support nand, since emmc has pin conflicts with nand
 207  */
 208 #ifdef CONFIG_NAND_MXS
 209 #define CONFIG_CMD_NAND
 210 #define CONFIG_CMD_NAND_TRIMFFS
 211
 212 /* NAND stuff */
 213 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 214 #define CONFIG_SYS_NAND_BASE            0x40000000
 215 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 216 #define CONFIG_SYS_NAND_ONFI_DETECTION
 217
 218 /* DMA stuff, needed for GPMI/MXS NAND support */
 219 #define CONFIG_APBH_DMA
 220 #define CONFIG_APBH_DMA_BURST
 221 #define CONFIG_APBH_DMA_BURST8
 222 #endif
 223
 224 #define CONFIG_ENV_OFFSET               (8 * SZ_64K)
 225 #ifdef CONFIG_NAND_MXS
 226 #define CONFIG_SYS_FSL_USDHC_NUM        1
 227 #else
 228 #define CONFIG_SYS_FSL_USDHC_NUM        2
 229 #endif
 230
 231 #define CONFIG_SYS_MMC_ENV_DEV          0   /* USDHC1 */
 232 #define CONFIG_SYS_MMC_ENV_PART         0       /* user area */
 233 #define CONFIG_MMCROOT                  "/dev/mmcblk0p2"  /* USDHC1 */
 234
 235 /* USB Configs */
 236 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 237 #define CONFIG_USB_HOST_ETHER
 238 #define CONFIG_USB_ETHER_ASIX
 239 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 240 #define CONFIG_MXC_USB_FLAGS   0
 241 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 242
 243 #define CONFIG_IMX_THERMAL
 244
 245 #define CONFIG_USBD_HS
 246
 247 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 248
 249 #ifdef CONFIG_VIDEO
 250 #define CONFIG_VIDEO_MXS
 251 #define CONFIG_VIDEO_LOGO
 252 #define CONFIG_SPLASH_SCREEN
 253 #define CONFIG_SPLASH_SCREEN_ALIGN
 254 #define CONFIG_CMD_BMP
 255 #define CONFIG_BMP_16BPP
 256 #define CONFIG_VIDEO_BMP_RLE8
 257 #define CONFIG_VIDEO_BMP_LOGO
 258 #endif
 259
 260 #ifdef CONFIG_FSL_QSPI
 261 #define CONFIG_SPI_FLASH
 262 #define CONFIG_SPI_FLASH_MACRONIX
 263 #define CONFIG_SPI_FLASH_BAR
 264 #define CONFIG_SF_DEFAULT_BUS           0
 265 #define CONFIG_SF_DEFAULT_CS            0
 266 #define CONFIG_SF_DEFAULT_SPEED         40000000
 267 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
 268 #define FSL_QSPI_FLASH_NUM              1
 269 #define FSL_QSPI_FLASH_SIZE             SZ_64M
 270 #define QSPI0_BASE_ADDR                 QSPI1_IPS_BASE_ADDR
 271 #define QSPI0_AMBA_BASE                 QSPI0_ARB_BASE_ADDR
 272 #endif
 273
 274 #endif  /* __CONFIG_H */