include/configs/mx7dsabresd.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2015 Freescale Semiconductor, Inc.
   4  *
   5  * Configuration settings for the Freescale i.MX7D SABRESD board.
   6  */
   7
   8 #ifndef __MX7D_SABRESD_CONFIG_H
   9 #define __MX7D_SABRESD_CONFIG_H
  10
  11 #include "mx7_common.h"
  12
  13 #define PHYS_SDRAM_SIZE                 SZ_1G
  14
  15 #define CONFIG_MXC_UART_BASE            UART1_IPS_BASE_ADDR
  16
  17 /* MMC Config*/
  18 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  19
  20 #ifdef CONFIG_IMX_BOOTAUX
  21 /* Set to QSPI1 A flash at default */
  22 #define CONFIG_SYS_AUXCORE_BOOTDATA 0x60000000
  23
  24 #define UPDATE_M4_ENV \
  25         "m4image=m4_qspi.bin\0" \
  26         "loadm4image=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${m4image}\0" \
  27         "update_m4_from_sd=" \
  28                 "if sf probe 0:0; then " \
  29                         "if run loadm4image; then " \
  30                                 "setexpr fw_sz ${filesize} + 0xffff; " \
  31                                 "setexpr fw_sz ${fw_sz} / 0x10000; "    \
  32                                 "setexpr fw_sz ${fw_sz} * 0x10000; "    \
  33                                 "sf erase 0x0 ${fw_sz}; " \
  34                                 "sf write ${loadaddr} 0x0 ${filesize}; " \
  35                         "fi; " \
  36                 "fi\0" \
  37         "m4boot=sf probe 0:0; bootaux "__stringify(CONFIG_SYS_AUXCORE_BOOTDATA)"\0"
  38 #else
  39 #define UPDATE_M4_ENV ""
  40 #endif
  41
  42 #define CONFIG_MFG_ENV_SETTINGS \
  43         "mfgtool_args=setenv bootargs console=${console},${baudrate} " \
  44                 "rdinit=/linuxrc " \
  45                 "g_mass_storage.stall=0 g_mass_storage.removable=1 " \
  46                 "g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF "\
  47                 "g_mass_storage.iSerialNumber=\"\" "\
  48                 "clk_ignore_unused "\
  49                 "\0" \
  50         "initrd_addr=0x83800000\0" \
  51         "initrd_high=0xffffffff\0" \
  52         "bootcmd_mfg=run mfgtool_args;bootz ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \
  53
  54 #define CONFIG_DFU_ENV_SETTINGS \
  55         "dfu_alt_info=image raw 0 0x800000;"\
  56                 "u-boot raw 0 0x4000;"\
  57                 "bootimg part 0 1;"\
  58                 "rootfs part 0 2\0" \
  59
  60 #define CONFIG_EXTRA_ENV_SETTINGS \
  61         UPDATE_M4_ENV \
  62         CONFIG_MFG_ENV_SETTINGS \
  63         CONFIG_DFU_ENV_SETTINGS \
  64         "script=boot.scr\0" \
  65         "image=zImage\0" \
  66         "console=ttymxc0\0" \
  67         "fdt_high=0xffffffff\0" \
  68         "finduuid=part uuid mmc 0:1 uuid\0" \
  69         "initrd_high=0xffffffff\0" \
  70         "fdtfile=imx7d-sdb.dtb\0" \
  71         "fdt_addr=0x83000000\0" \
  72         "fdt_addr_r=0x83000000\0" \
  73         "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
  74         "pxefile_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
  75         "ramdisk_addr_r=0x83100000\0" \
  76         "ramdiskaddr=0x83100000\0" \
  77         "scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
  78         "videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \
  79         BOOTENV
  80
  81 #define BOOT_TARGET_DEVICES(func) \
  82         func(MMC, mmc, 0) \
  83         func(DHCP, dhcp, na) \
  84         func(PXE, pxe, na)
  85
  86 #include <config_distro_bootcmd.h>
  87
  88 /* Physical Memory Map */
  89 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
  90
  91 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
  92 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
  93 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
  94
  95 #define CONFIG_SYS_INIT_SP_OFFSET \
  96         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  97 #define CONFIG_SYS_INIT_SP_ADDR \
  98         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  99
 100 /* environment organization */
 101
 102 /*
 103  * If want to use nand, define CONFIG_NAND_MXS and rework board
 104  * to support nand, since emmc has pin conflicts with nand
 105  */
 106 #ifdef CONFIG_NAND_MXS
 107 /* NAND stuff */
 108 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 109 #define CONFIG_SYS_NAND_BASE            0x40000000
 110
 111 /* DMA stuff, needed for GPMI/MXS NAND support */
 112 #endif
 113
 114 #ifdef CONFIG_NAND_MXS
 115 #define CONFIG_SYS_FSL_USDHC_NUM        1
 116 #else
 117 #define CONFIG_SYS_FSL_USDHC_NUM        2
 118 #endif
 119
 120 /* USB Configs */
 121 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 122
 123 #define CONFIG_USBD_HS
 124
 125 #endif  /* __CONFIG_H */