include/configs/mx7dsabresd.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2015 Freescale Semiconductor, Inc.
   4  *
   5  * Configuration settings for the Freescale i.MX7D SABRESD board.
   6  */
   7
   8 #ifndef __MX7D_SABRESD_CONFIG_H
   9 #define __MX7D_SABRESD_CONFIG_H
  10
  11 #include "mx7_common.h"
  12
  13 #define PHYS_SDRAM_SIZE                 SZ_1G
  14
  15 #define CONFIG_MXC_UART_BASE            UART1_IPS_BASE_ADDR
  16
  17 /* MMC Config*/
  18 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  19
  20 #define CONFIG_SYS_MMC_IMG_LOAD_PART    1
  21
  22 #ifdef CONFIG_IMX_BOOTAUX
  23 /* Set to QSPI1 A flash at default */
  24 #define CONFIG_SYS_AUXCORE_BOOTDATA 0x60000000
  25
  26 #define UPDATE_M4_ENV \
  27         "m4image=m4_qspi.bin\0" \
  28         "loadm4image=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${m4image}\0" \
  29         "update_m4_from_sd=" \
  30                 "if sf probe 0:0; then " \
  31                         "if run loadm4image; then " \
  32                                 "setexpr fw_sz ${filesize} + 0xffff; " \
  33                                 "setexpr fw_sz ${fw_sz} / 0x10000; "    \
  34                                 "setexpr fw_sz ${fw_sz} * 0x10000; "    \
  35                                 "sf erase 0x0 ${fw_sz}; " \
  36                                 "sf write ${loadaddr} 0x0 ${filesize}; " \
  37                         "fi; " \
  38                 "fi\0" \
  39         "m4boot=sf probe 0:0; bootaux "__stringify(CONFIG_SYS_AUXCORE_BOOTDATA)"\0"
  40 #else
  41 #define UPDATE_M4_ENV ""
  42 #endif
  43
  44 #define CONFIG_MFG_ENV_SETTINGS \
  45         "mfgtool_args=setenv bootargs console=${console},${baudrate} " \
  46                 "rdinit=/linuxrc " \
  47                 "g_mass_storage.stall=0 g_mass_storage.removable=1 " \
  48                 "g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF "\
  49                 "g_mass_storage.iSerialNumber=\"\" "\
  50                 "clk_ignore_unused "\
  51                 "\0" \
  52         "initrd_addr=0x83800000\0" \
  53         "initrd_high=0xffffffff\0" \
  54         "bootcmd_mfg=run mfgtool_args;bootz ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \
  55
  56 #define CONFIG_DFU_ENV_SETTINGS \
  57         "dfu_alt_info=image raw 0 0x800000;"\
  58                 "u-boot raw 0 0x4000;"\
  59                 "bootimg part 0 1;"\
  60                 "rootfs part 0 2\0" \
  61
  62 #define CONFIG_EXTRA_ENV_SETTINGS \
  63         UPDATE_M4_ENV \
  64         CONFIG_MFG_ENV_SETTINGS \
  65         CONFIG_DFU_ENV_SETTINGS \
  66         "script=boot.scr\0" \
  67         "image=zImage\0" \
  68         "console=ttymxc0\0" \
  69         "fdt_high=0xffffffff\0" \
  70         "finduuid=part uuid mmc 0:1 uuid\0" \
  71         "initrd_high=0xffffffff\0" \
  72         "fdtfile=imx7d-sdb.dtb\0" \
  73         "fdt_addr=0x83000000\0" \
  74         "fdt_addr_r=0x83000000\0" \
  75         "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
  76         "pxefile_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
  77         "ramdisk_addr_r=0x83100000\0" \
  78         "ramdiskaddr=0x83100000\0" \
  79         "scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
  80         "videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \
  81         BOOTENV
  82
  83 #define BOOT_TARGET_DEVICES(func) \
  84         func(MMC, mmc, 0) \
  85         func(DHCP, dhcp, na) \
  86         func(PXE, pxe, na)
  87
  88 #include <config_distro_bootcmd.h>
  89
  90 #define CONFIG_SYS_HZ                   1000
  91
  92 /* Physical Memory Map */
  93 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
  94
  95 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
  96 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
  97 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
  98
  99 #define CONFIG_SYS_INIT_SP_OFFSET \
 100         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 101 #define CONFIG_SYS_INIT_SP_ADDR \
 102         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 103
 104 /* environment organization */
 105
 106 /*
 107  * If want to use nand, define CONFIG_NAND_MXS and rework board
 108  * to support nand, since emmc has pin conflicts with nand
 109  */
 110 #ifdef CONFIG_NAND_MXS
 111 /* NAND stuff */
 112 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 113 #define CONFIG_SYS_NAND_BASE            0x40000000
 114
 115 /* DMA stuff, needed for GPMI/MXS NAND support */
 116 #endif
 117
 118 #ifdef CONFIG_NAND_MXS
 119 #define CONFIG_SYS_FSL_USDHC_NUM        1
 120 #else
 121 #define CONFIG_SYS_FSL_USDHC_NUM        2
 122 #endif
 123
 124 /* USB Configs */
 125 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 126
 127 #define CONFIG_USBD_HS
 128
 129 #ifdef CONFIG_DM_VIDEO
 130 #define CONFIG_VIDEO_LOGO
 131 #define CONFIG_VIDEO_BMP_LOGO
 132 #endif
 133
 134 #endif  /* __CONFIG_H */