include/configs/mx7dsabresd.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2015 Freescale Semiconductor, Inc.
   4  *
   5  * Configuration settings for the Freescale i.MX7D SABRESD board.
   6  */
   7
   8 #ifndef __MX7D_SABRESD_CONFIG_H
   9 #define __MX7D_SABRESD_CONFIG_H
  10
  11 #include "mx7_common.h"
  12
  13 #define PHYS_SDRAM_SIZE                 SZ_1G
  14
  15 #define CONFIG_MXC_UART_BASE            UART1_IPS_BASE_ADDR
  16
  17 /* Size of malloc() pool */
  18 #define CONFIG_SYS_MALLOC_LEN           (32 * SZ_1M)
  19
  20 /* MMC Config*/
  21 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  22
  23 /* I2C configs */
  24 #define CONFIG_SYS_I2C_MXC
  25 #define CONFIG_SYS_I2C_SPEED            100000
  26
  27 #define CONFIG_SYS_MMC_IMG_LOAD_PART    1
  28
  29 #ifdef CONFIG_IMX_BOOTAUX
  30 /* Set to QSPI1 A flash at default */
  31 #define CONFIG_SYS_AUXCORE_BOOTDATA 0x60000000
  32
  33 #define UPDATE_M4_ENV \
  34         "m4image=m4_qspi.bin\0" \
  35         "loadm4image=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${m4image}\0" \
  36         "update_m4_from_sd=" \
  37                 "if sf probe 0:0; then " \
  38                         "if run loadm4image; then " \
  39                                 "setexpr fw_sz ${filesize} + 0xffff; " \
  40                                 "setexpr fw_sz ${fw_sz} / 0x10000; "    \
  41                                 "setexpr fw_sz ${fw_sz} * 0x10000; "    \
  42                                 "sf erase 0x0 ${fw_sz}; " \
  43                                 "sf write ${loadaddr} 0x0 ${filesize}; " \
  44                         "fi; " \
  45                 "fi\0" \
  46         "m4boot=sf probe 0:0; bootaux "__stringify(CONFIG_SYS_AUXCORE_BOOTDATA)"\0"
  47 #else
  48 #define UPDATE_M4_ENV ""
  49 #endif
  50
  51 #define CONFIG_MFG_ENV_SETTINGS \
  52         "mfgtool_args=setenv bootargs console=${console},${baudrate} " \
  53                 "rdinit=/linuxrc " \
  54                 "g_mass_storage.stall=0 g_mass_storage.removable=1 " \
  55                 "g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF "\
  56                 "g_mass_storage.iSerialNumber=\"\" "\
  57                 "clk_ignore_unused "\
  58                 "\0" \
  59         "initrd_addr=0x83800000\0" \
  60         "initrd_high=0xffffffff\0" \
  61         "bootcmd_mfg=run mfgtool_args;bootz ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \
  62
  63 #define CONFIG_DFU_ENV_SETTINGS \
  64         "dfu_alt_info=image raw 0 0x800000;"\
  65                 "u-boot raw 0 0x4000;"\
  66                 "bootimg part 0 1;"\
  67                 "rootfs part 0 2\0" \
  68
  69 #define CONFIG_EXTRA_ENV_SETTINGS \
  70         UPDATE_M4_ENV \
  71         CONFIG_MFG_ENV_SETTINGS \
  72         CONFIG_DFU_ENV_SETTINGS \
  73         "script=boot.scr\0" \
  74         "image=zImage\0" \
  75         "console=ttymxc0\0" \
  76         "fdt_high=0xffffffff\0" \
  77         "finduuid=part uuid mmc 0:1 uuid\0" \
  78         "initrd_high=0xffffffff\0" \
  79         "fdtfile=imx7d-sdb.dtb\0" \
  80         "fdt_addr=0x83000000\0" \
  81         "fdt_addr_r=0x83000000\0" \
  82         "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
  83         "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
  84         "ramdisk_addr_r=0x83100000\0" \
  85         "ramdiskaddr=0x83100000\0" \
  86         "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
  87         "videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \
  88         BOOTENV
  89
  90 #define BOOT_TARGET_DEVICES(func) \
  91         func(MMC, mmc, 0) \
  92         func(DHCP, dhcp, na) \
  93         func(PXE, pxe, na)
  94
  95 #include <config_distro_bootcmd.h>
  96
  97 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
  98 #define CONFIG_SYS_HZ                   1000
  99
 100 /* Physical Memory Map */
 101 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 102
 103 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 104 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 105 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 106
 107 #define CONFIG_SYS_INIT_SP_OFFSET \
 108         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 109 #define CONFIG_SYS_INIT_SP_ADDR \
 110         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 111
 112 /* environment organization */
 113
 114 /*
 115  * If want to use nand, define CONFIG_NAND_MXS and rework board
 116  * to support nand, since emmc has pin conflicts with nand
 117  */
 118 #ifdef CONFIG_NAND_MXS
 119 /* NAND stuff */
 120 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 121 #define CONFIG_SYS_NAND_BASE            0x40000000
 122 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 123 #define CONFIG_SYS_NAND_ONFI_DETECTION
 124
 125 /* DMA stuff, needed for GPMI/MXS NAND support */
 126 #endif
 127
 128 #ifdef CONFIG_NAND_MXS
 129 #define CONFIG_SYS_FSL_USDHC_NUM        1
 130 #else
 131 #define CONFIG_SYS_FSL_USDHC_NUM        2
 132 #endif
 133
 134 /* USB Configs */
 135 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 136
 137 #define CONFIG_USBD_HS
 138
 139 #ifdef CONFIG_VIDEO
 140 #define CONFIG_VIDEO_MXS
 141 #define CONFIG_VIDEO_LOGO
 142 #define CONFIG_VIDEO_BMP_LOGO
 143 #endif
 144
 145 #endif  /* __CONFIG_H */