include/configs/mx7dsabresd.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2015 Freescale Semiconductor, Inc.
   4  *
   5  * Configuration settings for the Freescale i.MX7D SABRESD board.
   6  */
   7
   8 #ifndef __MX7D_SABRESD_CONFIG_H
   9 #define __MX7D_SABRESD_CONFIG_H
  10
  11 #include "mx7_common.h"
  12
  13 #define PHYS_SDRAM_SIZE                 SZ_1G
  14
  15 #define CONFIG_MXC_UART_BASE            UART1_IPS_BASE_ADDR
  16
  17 #ifdef CONFIG_IMX_BOOTAUX
  18 /* Set to QSPI1 A flash at default */
  19 #define CONFIG_SYS_AUXCORE_BOOTDATA 0x60000000
  20
  21 #define UPDATE_M4_ENV \
  22         "m4image=m4_qspi.bin\0" \
  23         "loadm4image=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${m4image}\0" \
  24         "update_m4_from_sd=" \
  25                 "if sf probe 0:0; then " \
  26                         "if run loadm4image; then " \
  27                                 "setexpr fw_sz ${filesize} + 0xffff; " \
  28                                 "setexpr fw_sz ${fw_sz} / 0x10000; "    \
  29                                 "setexpr fw_sz ${fw_sz} * 0x10000; "    \
  30                                 "sf erase 0x0 ${fw_sz}; " \
  31                                 "sf write ${loadaddr} 0x0 ${filesize}; " \
  32                         "fi; " \
  33                 "fi\0" \
  34         "m4boot=sf probe 0:0; bootaux "__stringify(CONFIG_SYS_AUXCORE_BOOTDATA)"\0"
  35 #else
  36 #define UPDATE_M4_ENV ""
  37 #endif
  38
  39 #define CONFIG_MFG_ENV_SETTINGS \
  40         "mfgtool_args=setenv bootargs console=${console},${baudrate} " \
  41                 "rdinit=/linuxrc " \
  42                 "g_mass_storage.stall=0 g_mass_storage.removable=1 " \
  43                 "g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF "\
  44                 "g_mass_storage.iSerialNumber=\"\" "\
  45                 "clk_ignore_unused "\
  46                 "\0" \
  47         "initrd_addr=0x83800000\0" \
  48         "initrd_high=0xffffffff\0" \
  49         "bootcmd_mfg=run mfgtool_args;bootz ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \
  50
  51 #define CONFIG_DFU_ENV_SETTINGS \
  52         "dfu_alt_info=image raw 0 0x800000;"\
  53                 "u-boot raw 0 0x4000;"\
  54                 "bootimg part 0 1;"\
  55                 "rootfs part 0 2\0" \
  56
  57 #define CONFIG_EXTRA_ENV_SETTINGS \
  58         UPDATE_M4_ENV \
  59         CONFIG_MFG_ENV_SETTINGS \
  60         CONFIG_DFU_ENV_SETTINGS \
  61         "script=boot.scr\0" \
  62         "image=zImage\0" \
  63         "console=ttymxc0\0" \
  64         "fdt_high=0xffffffff\0" \
  65         "finduuid=part uuid mmc 0:1 uuid\0" \
  66         "initrd_high=0xffffffff\0" \
  67         "fdtfile=imx7d-sdb.dtb\0" \
  68         "fdt_addr=0x83000000\0" \
  69         "fdt_addr_r=0x83000000\0" \
  70         "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
  71         "pxefile_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
  72         "ramdisk_addr_r=0x83100000\0" \
  73         "ramdiskaddr=0x83100000\0" \
  74         "scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
  75         "videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \
  76         BOOTENV
  77
  78 #define BOOT_TARGET_DEVICES(func) \
  79         func(MMC, mmc, 0) \
  80         func(DHCP, dhcp, na) \
  81         func(PXE, pxe, na)
  82
  83 #include <config_distro_bootcmd.h>
  84
  85 /* Physical Memory Map */
  86 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
  87
  88 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
  89 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
  90 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
  91
  92 /* environment organization */
  93
  94 /*
  95  * If want to use nand, define CONFIG_NAND_MXS and rework board
  96  * to support nand, since emmc has pin conflicts with nand
  97  */
  98 #ifdef CONFIG_NAND_MXS
  99 /* NAND stuff */
 100 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 101 #define CONFIG_SYS_NAND_BASE            0x40000000
 102
 103 /* DMA stuff, needed for GPMI/MXS NAND support */
 104 #endif
 105
 106 /* USB Configs */
 107 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 108
 109 #define CONFIG_USBD_HS
 110
 111 #endif  /* __CONFIG_H */