Merge git://git.denx.de/u-boot-video
[platform/kernel/u-boot.git] / include / configs / mx6ul_14x14_evk.h
1 /*
2  * Copyright (C) 2015 Freescale Semiconductor, Inc.
3  *
4  * Configuration settings for the Freescale i.MX6UL 14x14 EVK board.
5  *
6  * SPDX-License-Identifier:     GPL-2.0+
7  */
8 #ifndef __MX6UL_14X14_EVK_CONFIG_H
9 #define __MX6UL_14X14_EVK_CONFIG_H
10
11 #include <asm/arch/imx-regs.h>
12 #include <linux/sizes.h>
13 #include "mx6_common.h"
14 #include <asm/mach-imx/gpio.h>
15
16 #define is_mx6ul_9x9_evk()      CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK)
17
18 /* SPL options */
19 #include "imx6_spl.h"
20
21 /* Size of malloc() pool */
22 #define CONFIG_SYS_MALLOC_LEN           (16 * SZ_1M)
23
24 #define CONFIG_MXC_UART
25 #define CONFIG_MXC_UART_BASE            UART1_BASE
26
27 /* MMC Configs */
28 #ifdef CONFIG_FSL_USDHC
29 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC2_BASE_ADDR
30
31 /* NAND pin conflicts with usdhc2 */
32 #ifdef CONFIG_NAND_MXS
33 #define CONFIG_SYS_FSL_USDHC_NUM        1
34 #else
35 #define CONFIG_SYS_FSL_USDHC_NUM        2
36 #endif
37
38 #endif
39
40 /* I2C configs */
41 #ifdef CONFIG_CMD_I2C
42 #define CONFIG_SYS_I2C
43 #define CONFIG_SYS_I2C_MXC
44 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
45 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
46 #define CONFIG_SYS_I2C_SPEED            100000
47
48 /* PMIC only for 9X9 EVK */
49 #define CONFIG_POWER
50 #define CONFIG_POWER_I2C
51 #define CONFIG_POWER_PFUZE3000
52 #define CONFIG_POWER_PFUZE3000_I2C_ADDR  0x08
53 #endif
54
55 #define CONFIG_SYS_MMC_IMG_LOAD_PART    1
56
57 #define CONFIG_EXTRA_ENV_SETTINGS \
58         "script=boot.scr\0" \
59         "image=zImage\0" \
60         "console=ttymxc0\0" \
61         "fdt_high=0xffffffff\0" \
62         "initrd_high=0xffffffff\0" \
63         "fdt_file=undefined\0" \
64         "fdt_addr=0x83000000\0" \
65         "boot_fdt=try\0" \
66         "ip_dyn=yes\0" \
67         "videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \
68         "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
69         "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
70         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
71         "mmcautodetect=yes\0" \
72         "mmcargs=setenv bootargs console=${console},${baudrate} " \
73                 "root=${mmcroot}\0" \
74         "loadbootscript=" \
75                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
76         "bootscript=echo Running bootscript from mmc ...; " \
77                 "source\0" \
78         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
79         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
80         "mmcboot=echo Booting from mmc ...; " \
81                 "run mmcargs; " \
82                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
83                         "if run loadfdt; then " \
84                                 "bootz ${loadaddr} - ${fdt_addr}; " \
85                         "else " \
86                                 "if test ${boot_fdt} = try; then " \
87                                         "bootz; " \
88                                 "else " \
89                                         "echo WARN: Cannot load the DT; " \
90                                 "fi; " \
91                         "fi; " \
92                 "else " \
93                         "bootz; " \
94                 "fi;\0" \
95         "netargs=setenv bootargs console=${console},${baudrate} " \
96                 "root=/dev/nfs " \
97         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
98                 "netboot=echo Booting from net ...; " \
99                 "run netargs; " \
100                 "if test ${ip_dyn} = yes; then " \
101                         "setenv get_cmd dhcp; " \
102                 "else " \
103                         "setenv get_cmd tftp; " \
104                 "fi; " \
105                 "${get_cmd} ${image}; " \
106                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
107                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
108                                 "bootz ${loadaddr} - ${fdt_addr}; " \
109                         "else " \
110                                 "if test ${boot_fdt} = try; then " \
111                                         "bootz; " \
112                                 "else " \
113                                         "echo WARN: Cannot load the DT; " \
114                                 "fi; " \
115                         "fi; " \
116                 "else " \
117                         "bootz; " \
118                 "fi;\0" \
119                 "findfdt="\
120                         "if test $fdt_file = undefined; then " \
121                                 "if test $board_name = EVK && test $board_rev = 9X9; then " \
122                                         "setenv fdt_file imx6ul-9x9-evk.dtb; fi; " \
123                                 "if test $board_name = EVK && test $board_rev = 14X14; then " \
124                                         "setenv fdt_file imx6ul-14x14-evk.dtb; fi; " \
125                                 "if test $fdt_file = undefined; then " \
126                                         "echo WARNING: Could not determine dtb to use; fi; " \
127                         "fi;\0" \
128
129 #define CONFIG_BOOTCOMMAND \
130            "run findfdt;" \
131            "mmc dev ${mmcdev};" \
132            "mmc dev ${mmcdev}; if mmc rescan; then " \
133                    "if run loadbootscript; then " \
134                            "run bootscript; " \
135                    "else " \
136                            "if run loadimage; then " \
137                                    "run mmcboot; " \
138                            "else run netboot; " \
139                            "fi; " \
140                    "fi; " \
141            "else run netboot; fi"
142
143 /* Miscellaneous configurable options */
144 #define CONFIG_SYS_MEMTEST_START        0x80000000
145 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 0x8000000)
146
147 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
148 #define CONFIG_SYS_HZ                   1000
149
150 /* Physical Memory Map */
151 #define CONFIG_NR_DRAM_BANKS            1
152 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
153
154 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
155 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
156 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
157
158 #define CONFIG_SYS_INIT_SP_OFFSET \
159         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
160 #define CONFIG_SYS_INIT_SP_ADDR \
161         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
162
163 /* environment organization */
164 #define CONFIG_ENV_SIZE                 SZ_8K
165 #define CONFIG_ENV_OFFSET               (8 * SZ_64K)
166 #define CONFIG_SYS_MMC_ENV_DEV          1   /* USDHC2 */
167 #define CONFIG_SYS_MMC_ENV_PART         0       /* user area */
168 #define CONFIG_MMCROOT                  "/dev/mmcblk1p2"  /* USDHC2 */
169
170 #ifndef CONFIG_SYS_DCACHE_OFF
171 #endif
172
173 #ifdef CONFIG_FSL_QSPI
174 #define CONFIG_SF_DEFAULT_BUS           0
175 #define CONFIG_SF_DEFAULT_CS            0
176 #define CONFIG_SF_DEFAULT_SPEED 40000000
177 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
178 #define FSL_QSPI_FLASH_NUM              1
179 #define FSL_QSPI_FLASH_SIZE             SZ_32M
180 #endif
181
182 /* USB Configs */
183 #ifdef CONFIG_CMD_USB
184 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
185 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
186 #define CONFIG_MXC_USB_FLAGS   0
187 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
188 #endif
189
190 #ifdef CONFIG_CMD_NET
191 #define CONFIG_FEC_MXC
192 #define CONFIG_MII
193 #define CONFIG_FEC_ENET_DEV             1
194
195 #if (CONFIG_FEC_ENET_DEV == 0)
196 #define IMX_FEC_BASE                    ENET_BASE_ADDR
197 #define CONFIG_FEC_MXC_PHYADDR          0x2
198 #define CONFIG_FEC_XCV_TYPE             RMII
199 #elif (CONFIG_FEC_ENET_DEV == 1)
200 #define IMX_FEC_BASE                    ENET2_BASE_ADDR
201 #define CONFIG_FEC_MXC_PHYADDR          0x1
202 #define CONFIG_FEC_XCV_TYPE             RMII
203 #endif
204 #define CONFIG_ETHPRIME                 "FEC"
205 #endif
206
207 #define CONFIG_IMX_THERMAL
208
209 #ifndef CONFIG_SPL_BUILD
210 #ifdef CONFIG_VIDEO
211 #define CONFIG_VIDEO_MXS
212 #define CONFIG_VIDEO_LOGO
213 #define CONFIG_SPLASH_SCREEN
214 #define CONFIG_SPLASH_SCREEN_ALIGN
215 #define CONFIG_BMP_16BPP
216 #define CONFIG_VIDEO_BMP_RLE8
217 #define CONFIG_VIDEO_BMP_LOGO
218 #define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR
219 #endif
220 #endif
221
222 #endif