include/configs/mx6ul_14x14_evk.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2015 Freescale Semiconductor, Inc.
   4  *
   5  * Configuration settings for the Freescale i.MX6UL 14x14 EVK board.
   6  */
   7 #ifndef __MX6UL_14X14_EVK_CONFIG_H
   8 #define __MX6UL_14X14_EVK_CONFIG_H
   9
  10 #include <asm/arch/imx-regs.h>
  11 #include <linux/sizes.h>
  12 #include <linux/stringify.h>
  13 #include "mx6_common.h"
  14 #include <asm/mach-imx/gpio.h>
  15
  16 #define is_mx6ul_9x9_evk()      CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK)
  17
  18 /* SPL options */
  19 #include "imx6_spl.h"
  20
  21 #define CONFIG_MXC_UART_BASE            UART1_BASE
  22
  23 /* MMC Configs */
  24 #ifdef CONFIG_FSL_USDHC
  25 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC2_BASE_ADDR
  26
  27 /* NAND pin conflicts with usdhc2 */
  28 #ifdef CONFIG_NAND_MXS
  29 #define CONFIG_SYS_FSL_USDHC_NUM        1
  30 #else
  31 #define CONFIG_SYS_FSL_USDHC_NUM        2
  32 #endif
  33
  34 #endif
  35
  36 #define CONFIG_EXTRA_ENV_SETTINGS \
  37         "script=boot.scr\0" \
  38         "image=zImage\0" \
  39         "console=ttymxc0\0" \
  40         "fdt_high=0xffffffff\0" \
  41         "initrd_high=0xffffffff\0" \
  42         "fdt_file=undefined\0" \
  43         "fdt_addr=0x83000000\0" \
  44         "boot_fdt=try\0" \
  45         "ip_dyn=yes\0" \
  46         "splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
  47         "videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \
  48         "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
  49         "mmcpart=1\0" \
  50         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
  51         "mmcautodetect=yes\0" \
  52         "mmcargs=setenv bootargs console=${console},${baudrate} " \
  53                 "root=${mmcroot}\0" \
  54         "loadbootscript=" \
  55                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
  56         "bootscript=echo Running bootscript from mmc ...; " \
  57                 "source\0" \
  58         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
  59         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
  60         "mmcboot=echo Booting from mmc ...; " \
  61                 "run mmcargs; " \
  62                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
  63                         "if run loadfdt; then " \
  64                                 "bootz ${loadaddr} - ${fdt_addr}; " \
  65                         "else " \
  66                                 "if test ${boot_fdt} = try; then " \
  67                                         "bootz; " \
  68                                 "else " \
  69                                         "echo WARN: Cannot load the DT; " \
  70                                 "fi; " \
  71                         "fi; " \
  72                 "else " \
  73                         "bootz; " \
  74                 "fi;\0" \
  75         "netargs=setenv bootargs console=${console},${baudrate} " \
  76                 "root=/dev/nfs " \
  77         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
  78                 "netboot=echo Booting from net ...; " \
  79                 "run netargs; " \
  80                 "if test ${ip_dyn} = yes; then " \
  81                         "setenv get_cmd dhcp; " \
  82                 "else " \
  83                         "setenv get_cmd tftp; " \
  84                 "fi; " \
  85                 "${get_cmd} ${image}; " \
  86                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
  87                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
  88                                 "bootz ${loadaddr} - ${fdt_addr}; " \
  89                         "else " \
  90                                 "if test ${boot_fdt} = try; then " \
  91                                         "bootz; " \
  92                                 "else " \
  93                                         "echo WARN: Cannot load the DT; " \
  94                                 "fi; " \
  95                         "fi; " \
  96                 "else " \
  97                         "bootz; " \
  98                 "fi;\0" \
  99                 "findfdt="\
 100                         "if test $fdt_file = undefined; then " \
 101                                 "if test $board_name = EVK && test $board_rev = 9X9; then " \
 102                                         "setenv fdt_file imx6ul-9x9-evk.dtb; fi; " \
 103                                 "if test $board_name = EVK && test $board_rev = 14X14; then " \
 104                                         "setenv fdt_file imx6ul-14x14-evk.dtb; fi; " \
 105                                 "if test $fdt_file = undefined; then " \
 106                                         "echo WARNING: Could not determine dtb to use; fi; " \
 107                         "fi;\0" \
 108
 109 /* Miscellaneous configurable options */
 110
 111 /* Physical Memory Map */
 112 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 113
 114 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 115 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 116 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 117
 118 #define CONFIG_SYS_INIT_SP_OFFSET \
 119         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 120 #define CONFIG_SYS_INIT_SP_ADDR \
 121         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 122
 123 /* environment organization */
 124 #define CONFIG_MMCROOT                  "/dev/mmcblk1p2"  /* USDHC2 */
 125
 126 /* USB Configs */
 127 #ifdef CONFIG_CMD_USB
 128 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 129 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 130 #define CONFIG_MXC_USB_FLAGS   0
 131 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 132 #endif
 133
 134 #ifdef CONFIG_CMD_NET
 135 #define CONFIG_FEC_ENET_DEV             1
 136
 137 #if (CONFIG_FEC_ENET_DEV == 0)
 138 #define IMX_FEC_BASE                    ENET_BASE_ADDR
 139 #define CONFIG_FEC_MXC_PHYADDR          0x2
 140 #define CONFIG_FEC_XCV_TYPE             RMII
 141 #define CONFIG_ETHPRIME                 "eth0"
 142 #elif (CONFIG_FEC_ENET_DEV == 1)
 143 #define IMX_FEC_BASE                    ENET2_BASE_ADDR
 144 #define CONFIG_FEC_MXC_PHYADDR          0x1
 145 #define CONFIG_FEC_XCV_TYPE             RMII
 146 #define CONFIG_ETHPRIME                 "eth1"
 147 #endif
 148 #endif
 149
 150 #ifndef CONFIG_SPL_BUILD
 151 #if defined(CONFIG_DM_VIDEO)
 152 #define CONFIG_VIDEO_BMP_LOGO
 153 #define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR
 154 #endif
 155 #endif
 156
 157 #endif