include/configs/mx6ul_14x14_evk.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2015 Freescale Semiconductor, Inc.
   4  *
   5  * Configuration settings for the Freescale i.MX6UL 14x14 EVK board.
   6  */
   7 #ifndef __MX6UL_14X14_EVK_CONFIG_H
   8 #define __MX6UL_14X14_EVK_CONFIG_H
   9
  10 #include <asm/arch/imx-regs.h>
  11 #include <linux/sizes.h>
  12 #include "mx6_common.h"
  13 #include <asm/mach-imx/gpio.h>
  14
  15 #define is_mx6ul_9x9_evk()      CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK)
  16
  17 /* SPL options */
  18 #include "imx6_spl.h"
  19
  20 /* Size of malloc() pool */
  21 #define CONFIG_SYS_MALLOC_LEN           (16 * SZ_1M)
  22
  23 #define CONFIG_MXC_UART
  24 #define CONFIG_MXC_UART_BASE            UART1_BASE
  25
  26 /* MMC Configs */
  27 #ifdef CONFIG_FSL_USDHC
  28 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC2_BASE_ADDR
  29
  30 /* NAND pin conflicts with usdhc2 */
  31 #ifdef CONFIG_NAND_MXS
  32 #define CONFIG_SYS_FSL_USDHC_NUM        1
  33 #else
  34 #define CONFIG_SYS_FSL_USDHC_NUM        2
  35 #endif
  36
  37 #endif
  38
  39 /* I2C configs */
  40 #ifdef CONFIG_CMD_I2C
  41 #define CONFIG_SYS_I2C_MXC
  42 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  43 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  44 #define CONFIG_SYS_I2C_SPEED            100000
  45 #endif
  46
  47 #ifdef CONFIG_DM_GPIO
  48 #define CONFIG_DM_74X164
  49 #endif
  50
  51 #define CONFIG_SYS_MMC_IMG_LOAD_PART    1
  52
  53 #define CONFIG_EXTRA_ENV_SETTINGS \
  54         "script=boot.scr\0" \
  55         "image=zImage\0" \
  56         "console=ttymxc0\0" \
  57         "fdt_high=0xffffffff\0" \
  58         "initrd_high=0xffffffff\0" \
  59         "fdt_file=undefined\0" \
  60         "fdt_addr=0x83000000\0" \
  61         "boot_fdt=try\0" \
  62         "ip_dyn=yes\0" \
  63         "videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \
  64         "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
  65         "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
  66         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
  67         "mmcautodetect=yes\0" \
  68         "mmcargs=setenv bootargs console=${console},${baudrate} " \
  69                 "root=${mmcroot}\0" \
  70         "loadbootscript=" \
  71                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
  72         "bootscript=echo Running bootscript from mmc ...; " \
  73                 "source\0" \
  74         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
  75         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
  76         "mmcboot=echo Booting from mmc ...; " \
  77                 "run mmcargs; " \
  78                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
  79                         "if run loadfdt; then " \
  80                                 "bootz ${loadaddr} - ${fdt_addr}; " \
  81                         "else " \
  82                                 "if test ${boot_fdt} = try; then " \
  83                                         "bootz; " \
  84                                 "else " \
  85                                         "echo WARN: Cannot load the DT; " \
  86                                 "fi; " \
  87                         "fi; " \
  88                 "else " \
  89                         "bootz; " \
  90                 "fi;\0" \
  91         "netargs=setenv bootargs console=${console},${baudrate} " \
  92                 "root=/dev/nfs " \
  93         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
  94                 "netboot=echo Booting from net ...; " \
  95                 "run netargs; " \
  96                 "if test ${ip_dyn} = yes; then " \
  97                         "setenv get_cmd dhcp; " \
  98                 "else " \
  99                         "setenv get_cmd tftp; " \
 100                 "fi; " \
 101                 "${get_cmd} ${image}; " \
 102                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 103                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 104                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 105                         "else " \
 106                                 "if test ${boot_fdt} = try; then " \
 107                                         "bootz; " \
 108                                 "else " \
 109                                         "echo WARN: Cannot load the DT; " \
 110                                 "fi; " \
 111                         "fi; " \
 112                 "else " \
 113                         "bootz; " \
 114                 "fi;\0" \
 115                 "findfdt="\
 116                         "if test $fdt_file = undefined; then " \
 117                                 "if test $board_name = EVK && test $board_rev = 9X9; then " \
 118                                         "setenv fdt_file imx6ul-9x9-evk.dtb; fi; " \
 119                                 "if test $board_name = EVK && test $board_rev = 14X14; then " \
 120                                         "setenv fdt_file imx6ul-14x14-evk.dtb; fi; " \
 121                                 "if test $fdt_file = undefined; then " \
 122                                         "echo WARNING: Could not determine dtb to use; fi; " \
 123                         "fi;\0" \
 124
 125 #define CONFIG_BOOTCOMMAND \
 126            "run findfdt;" \
 127            "mmc dev ${mmcdev};" \
 128            "mmc dev ${mmcdev}; if mmc rescan; then " \
 129                    "if run loadbootscript; then " \
 130                            "run bootscript; " \
 131                    "else " \
 132                            "if run loadimage; then " \
 133                                    "run mmcboot; " \
 134                            "else run netboot; " \
 135                            "fi; " \
 136                    "fi; " \
 137            "else run netboot; fi"
 138
 139 /* Miscellaneous configurable options */
 140 #define CONFIG_SYS_MEMTEST_START        0x80000000
 141 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 0x8000000)
 142
 143 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 144 #define CONFIG_SYS_HZ                   1000
 145
 146 /* Physical Memory Map */
 147 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 148
 149 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 150 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 151 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 152
 153 #define CONFIG_SYS_INIT_SP_OFFSET \
 154         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 155 #define CONFIG_SYS_INIT_SP_ADDR \
 156         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 157
 158 /* environment organization */
 159 #define CONFIG_ENV_SIZE                 SZ_8K
 160 #define CONFIG_ENV_OFFSET               (8 * SZ_64K)
 161 #define CONFIG_SYS_MMC_ENV_DEV          1   /* USDHC2 */
 162 #define CONFIG_SYS_MMC_ENV_PART         0       /* user area */
 163 #define CONFIG_MMCROOT                  "/dev/mmcblk1p2"  /* USDHC2 */
 164
 165 #ifdef CONFIG_FSL_QSPI
 166 #define CONFIG_SYS_FSL_QSPI_AHB
 167 #define FSL_QSPI_FLASH_NUM              1
 168 #define FSL_QSPI_FLASH_SIZE             SZ_32M
 169 #endif
 170
 171 /* USB Configs */
 172 #ifdef CONFIG_CMD_USB
 173 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 174 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 175 #define CONFIG_MXC_USB_FLAGS   0
 176 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 177 #endif
 178
 179 #ifdef CONFIG_CMD_NET
 180 #define CONFIG_FEC_MXC
 181 #define CONFIG_FEC_ENET_DEV             1
 182
 183 #if (CONFIG_FEC_ENET_DEV == 0)
 184 #define IMX_FEC_BASE                    ENET_BASE_ADDR
 185 #define CONFIG_FEC_MXC_PHYADDR          0x2
 186 #define CONFIG_FEC_XCV_TYPE             RMII
 187 #define CONFIG_ETHPRIME                 "eth0"
 188 #elif (CONFIG_FEC_ENET_DEV == 1)
 189 #define IMX_FEC_BASE                    ENET2_BASE_ADDR
 190 #define CONFIG_FEC_MXC_PHYADDR          0x1
 191 #define CONFIG_FEC_XCV_TYPE             RMII
 192 #define CONFIG_ETHPRIME                 "eth1"
 193 #endif
 194 #endif
 195
 196 #define CONFIG_IMX_THERMAL
 197
 198 #ifndef CONFIG_SPL_BUILD
 199 #ifdef CONFIG_VIDEO
 200 #define CONFIG_VIDEO_MXS
 201 #define CONFIG_VIDEO_LOGO
 202 #define CONFIG_SPLASH_SCREEN
 203 #define CONFIG_SPLASH_SCREEN_ALIGN
 204 #define CONFIG_BMP_16BPP
 205 #define CONFIG_VIDEO_BMP_RLE8
 206 #define CONFIG_VIDEO_BMP_LOGO
 207 #define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR
 208 #endif
 209 #endif
 210
 211 #endif