include/configs/mx6sxsabresd.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2014 Freescale Semiconductor, Inc.
   4  *
   5  * Configuration settings for the Freescale i.MX6SX Sabresd board.
   6  */
   7
   8 #ifndef __CONFIG_H
   9 #define __CONFIG_H
  10
  11 #include <linux/stringify.h>
  12
  13 #include "mx6_common.h"
  14
  15 #ifdef CONFIG_SPL
  16 #include "imx6_spl.h"
  17 #endif
  18
  19 /* Size of malloc() pool */
  20 #define CONFIG_SYS_MALLOC_LEN           (3 * SZ_1M)
  21
  22 #define CONFIG_MXC_UART
  23 #define CONFIG_MXC_UART_BASE            UART1_BASE
  24
  25 #ifdef CONFIG_IMX_BOOTAUX
  26 /* Set to QSPI2 B flash at default */
  27 #define CONFIG_SYS_AUXCORE_BOOTDATA 0x78000000
  28
  29 #define UPDATE_M4_ENV \
  30         "m4image=m4_qspi.bin\0" \
  31         "loadm4image=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${m4image}\0" \
  32         "update_m4_from_sd=" \
  33                 "if sf probe 1:0; then " \
  34                         "if run loadm4image; then " \
  35                                 "setexpr fw_sz ${filesize} + 0xffff; " \
  36                                 "setexpr fw_sz ${fw_sz} / 0x10000; "    \
  37                                 "setexpr fw_sz ${fw_sz} * 0x10000; "    \
  38                                 "sf erase 0x0 ${fw_sz}; " \
  39                                 "sf write ${loadaddr} 0x0 ${filesize}; " \
  40                         "fi; " \
  41                 "fi\0" \
  42         "m4boot=sf probe 1:0; bootaux "__stringify(CONFIG_SYS_AUXCORE_BOOTDATA)"\0"
  43 #else
  44 #define UPDATE_M4_ENV ""
  45 #endif
  46
  47 #define CONFIG_EXTRA_ENV_SETTINGS \
  48         UPDATE_M4_ENV \
  49         "script=boot.scr\0" \
  50         "image=zImage\0" \
  51         "console=ttymxc0\0" \
  52         "fdt_high=0xffffffff\0" \
  53         "initrd_high=0xffffffff\0" \
  54         "fdt_file=imx6sx-sdb.dtb\0" \
  55         "fdt_addr=0x88000000\0" \
  56         "boot_fdt=try\0" \
  57         "ip_dyn=yes\0" \
  58         "videomode=video=ctfb:x:800,y:480,depth:24,pclk:29850,le:89,ri:164,up:23,lo:10,hs:10,vs:10,sync:0,vmode:0\0" \
  59         "mmcdev=3\0" \
  60         "mmcpart=1\0" \
  61         "finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \
  62         "mmcargs=setenv bootargs console=${console},${baudrate} " \
  63                 "root=PARTUUID=${uuid} rootwait rw\0" \
  64         "loadbootscript=" \
  65                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
  66         "bootscript=echo Running bootscript from mmc ...; " \
  67                 "source\0" \
  68         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
  69         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
  70         "mmcboot=echo Booting from mmc ...; " \
  71                 "run finduuid; " \
  72                 "run mmcargs; " \
  73                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
  74                         "if run loadfdt; then " \
  75                                 "bootz ${loadaddr} - ${fdt_addr}; " \
  76                         "else " \
  77                                 "if test ${boot_fdt} = try; then " \
  78                                         "bootz; " \
  79                                 "else " \
  80                                         "echo WARN: Cannot load the DT; " \
  81                                 "fi; " \
  82                         "fi; " \
  83                 "else " \
  84                         "bootz; " \
  85                 "fi;\0" \
  86         "netargs=setenv bootargs console=${console},${baudrate} " \
  87                 "root=/dev/nfs " \
  88         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
  89                 "netboot=echo Booting from net ...; " \
  90                 "run netargs; " \
  91                 "if test ${ip_dyn} = yes; then " \
  92                         "setenv get_cmd dhcp; " \
  93                 "else " \
  94                         "setenv get_cmd tftp; " \
  95                 "fi; " \
  96                 "${get_cmd} ${image}; " \
  97                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
  98                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
  99                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 100                         "else " \
 101                                 "if test ${boot_fdt} = try; then " \
 102                                         "bootz; " \
 103                                 "else " \
 104                                         "echo WARN: Cannot load the DT; " \
 105                                 "fi; " \
 106                         "fi; " \
 107                 "else " \
 108                         "bootz; " \
 109                 "fi;\0" \
 110         "findfdt="\
 111                 "if test test $board_rev = REVA ; then " \
 112                         "setenv fdt_file imx6sx-sdb-reva.dtb; fi; " \
 113
 114 #define CONFIG_BOOTCOMMAND \
 115            "run findfdt; " \
 116            "mmc dev ${mmcdev}; if mmc rescan; then " \
 117                    "if run loadbootscript; then " \
 118                            "run bootscript; " \
 119                    "else " \
 120                            "if run loadimage; then " \
 121                                    "run mmcboot; " \
 122                            "else run netboot; " \
 123                            "fi; " \
 124                    "fi; " \
 125            "else run netboot; fi"
 126
 127 /* Miscellaneous configurable options */
 128
 129 /* Physical Memory Map */
 130 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 131
 132 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 133 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 134 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 135
 136 #define CONFIG_SYS_INIT_SP_OFFSET \
 137         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 138 #define CONFIG_SYS_INIT_SP_ADDR \
 139         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 140
 141 /* MMC Configuration */
 142 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC4_BASE_ADDR
 143
 144 /* I2C Configs */
 145 #define CONFIG_SYS_I2C_MXC
 146 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
 147 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
 148 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 149 #define CONFIG_SYS_I2C_SPEED              100000
 150
 151 /* Network */
 152 #define CONFIG_FEC_MXC
 153
 154 #define IMX_FEC_BASE                    ENET_BASE_ADDR
 155 #define CONFIG_FEC_MXC_PHYADDR          0x1
 156
 157 #define CONFIG_FEC_XCV_TYPE             RGMII
 158 #define CONFIG_ETHPRIME                 "FEC"
 159
 160 #ifdef CONFIG_CMD_USB
 161 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 162 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 163 #define CONFIG_MXC_USB_FLAGS   0
 164 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 165 #endif
 166
 167 #ifdef CONFIG_CMD_PCI
 168 #define CONFIG_PCI_SCAN_SHOW
 169 #define CONFIG_PCIE_IMX
 170 #define CONFIG_PCIE_IMX_PERST_GPIO      IMX_GPIO_NR(2, 0)
 171 #define CONFIG_PCIE_IMX_POWER_GPIO      IMX_GPIO_NR(2, 1)
 172 #endif
 173
 174 #define CONFIG_IMX_THERMAL
 175
 176 #ifndef CONFIG_SPL_BUILD
 177 #ifdef CONFIG_VIDEO
 178 #define CONFIG_VIDEO_MXS
 179 #define CONFIG_VIDEO_LOGO
 180 #define CONFIG_SPLASH_SCREEN
 181 #define CONFIG_SPLASH_SCREEN_ALIGN
 182 #define CONFIG_BMP_16BPP
 183 #define CONFIG_VIDEO_BMP_RLE8
 184 #define CONFIG_VIDEO_BMP_LOGO
 185 #define MXS_LCDIF_BASE MX6SX_LCDIF1_BASE_ADDR
 186 #endif
 187 #endif
 188
 189 #define CONFIG_SYS_FSL_USDHC_NUM        3
 190 #if defined(CONFIG_ENV_IS_IN_MMC)
 191 #define CONFIG_SYS_MMC_ENV_DEV          2  /*USDHC4*/
 192 #endif
 193
 194 #endif                          /* __CONFIG_H */