include/configs/mx6sxsabreauto.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2014 Freescale Semiconductor, Inc.
   4  *
   5  * Configuration settings for the Freescale i.MX6SX Sabreauto board.
   6  */
   7
   8 #ifndef __CONFIG_H
   9 #define __CONFIG_H
  10
  11 #include "mx6_common.h"
  12
  13 #define CONFIG_MXC_UART_BASE            UART1_BASE
  14
  15 #define CONFIG_EXTRA_ENV_SETTINGS \
  16         "script=boot.scr\0" \
  17         "image=zImage\0" \
  18         "console=ttymxc0\0" \
  19         "fdt_high=0xffffffff\0" \
  20         "initrd_high=0xffffffff\0" \
  21         "fdt_file=imx6sx-sabreauto.dtb\0" \
  22         "fdt_addr=0x88000000\0" \
  23         "boot_fdt=try\0" \
  24         "ip_dyn=yes\0" \
  25         "mmcdev=0\0" \
  26         "mmcpart=1\0" \
  27         "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
  28         "mmcargs=setenv bootargs console=${console},${baudrate} " \
  29                 "root=${mmcroot}\0" \
  30         "loadbootscript=" \
  31                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
  32         "bootscript=echo Running bootscript from mmc ...; " \
  33                 "source\0" \
  34         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
  35         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
  36         "mmcboot=echo Booting from mmc ...; " \
  37                 "run mmcargs; " \
  38                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
  39                         "if run loadfdt; then " \
  40                                 "bootz ${loadaddr} - ${fdt_addr}; " \
  41                         "else " \
  42                                 "if test ${boot_fdt} = try; then " \
  43                                         "bootz; " \
  44                                 "else " \
  45                                         "echo WARN: Cannot load the DT; " \
  46                                 "fi; " \
  47                         "fi; " \
  48                 "else " \
  49                         "bootz; " \
  50                 "fi;\0" \
  51         "netargs=setenv bootargs console=${console},${baudrate} " \
  52                 "root=/dev/nfs " \
  53         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
  54                 "netboot=echo Booting from net ...; " \
  55                 "run netargs; " \
  56                 "if test ${ip_dyn} = yes; then " \
  57                         "setenv get_cmd dhcp; " \
  58                 "else " \
  59                         "setenv get_cmd tftp; " \
  60                 "fi; " \
  61                 "${get_cmd} ${image}; " \
  62                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
  63                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
  64                                 "bootz ${loadaddr} - ${fdt_addr}; " \
  65                         "else " \
  66                                 "if test ${boot_fdt} = try; then " \
  67                                         "bootz; " \
  68                                 "else " \
  69                                         "echo WARN: Cannot load the DT; " \
  70                                 "fi; " \
  71                         "fi; " \
  72                 "else " \
  73                         "bootz; " \
  74                 "fi;\0"
  75
  76 /* Miscellaneous configurable options */
  77
  78 /* Physical Memory Map */
  79 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
  80
  81 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
  82 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
  83 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
  84
  85 #define CONFIG_SYS_INIT_SP_OFFSET \
  86         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  87 #define CONFIG_SYS_INIT_SP_ADDR \
  88         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  89
  90 /* MMC Configuration */
  91 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC3_BASE_ADDR
  92
  93 /* NAND stuff */
  94 #define CONFIG_SYS_MAX_NAND_DEVICE     1
  95 #define CONFIG_SYS_NAND_BASE           0x40000000
  96
  97 /* DMA stuff, needed for GPMI/MXS NAND support */
  98
  99 /* Network */
 100
 101 #define IMX_FEC_BASE                    ENET2_BASE_ADDR
 102 #define CONFIG_FEC_MXC_PHYADDR          0x0
 103
 104 #define CONFIG_FEC_XCV_TYPE             RGMII
 105 #define CONFIG_ETHPRIME                 "FEC"
 106
 107 #ifdef CONFIG_CMD_USB
 108 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 109 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 110 #define CONFIG_MXC_USB_FLAGS   0
 111 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 112 #endif
 113
 114 #define CONFIG_SYS_FSL_USDHC_NUM        2
 115
 116 #endif                          /* __CONFIG_H */