include/configs/mx6slevk.h

   1 /*
   2  * Copyright 2013 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Freescale i.MX6SL EVK board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #include "mx6_common.h"
  13
  14 #ifdef CONFIG_SPL
  15 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  16 #define CONFIG_SPL_MMC_SUPPORT
  17 #include "imx6_spl.h"
  18 #endif
  19
  20 #define MACH_TYPE_MX6SLEVK              4307
  21 #define CONFIG_MACH_TYPE                MACH_TYPE_MX6SLEVK
  22
  23 /* Size of malloc() pool */
  24 #define CONFIG_SYS_MALLOC_LEN           (3 * SZ_1M)
  25
  26 #define CONFIG_BOARD_EARLY_INIT_F
  27
  28 #define CONFIG_MXC_UART
  29 #define CONFIG_MXC_UART_BASE            UART1_IPS_BASE_ADDR
  30
  31 /* MMC Configs */
  32 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC2_BASE_ADDR
  33
  34 /* I2C Configs */
  35 #define CONFIG_CMD_I2C
  36 #define CONFIG_SYS_I2C
  37 #define CONFIG_SYS_I2C_MXC
  38 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  39 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  40 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  41 #define CONFIG_SYS_I2C_SPEED              100000
  42
  43 /* PMIC */
  44 #define CONFIG_POWER
  45 #define CONFIG_POWER_I2C
  46 #define CONFIG_POWER_PFUZE100
  47 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
  48
  49 #define CONFIG_CMD_PING
  50 #define CONFIG_CMD_DHCP
  51 #define CONFIG_CMD_MII
  52 #define CONFIG_FEC_MXC
  53 #define CONFIG_MII
  54 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  55 #define CONFIG_FEC_XCV_TYPE             RMII
  56 #define CONFIG_ETHPRIME                 "FEC"
  57 #define CONFIG_FEC_MXC_PHYADDR          0
  58
  59 #define CONFIG_PHYLIB
  60 #define CONFIG_PHY_SMSC
  61
  62 #define CONFIG_EXTRA_ENV_SETTINGS \
  63         "script=boot.scr\0" \
  64         "image=zImage\0" \
  65         "console=ttymxc0\0" \
  66         "fdt_high=0xffffffff\0" \
  67         "initrd_high=0xffffffff\0" \
  68         "fdt_file=imx6sl-evk.dtb\0" \
  69         "fdt_addr=0x88000000\0" \
  70         "boot_fdt=try\0" \
  71         "ip_dyn=yes\0" \
  72         "mmcdev=1\0" \
  73         "mmcpart=1\0" \
  74         "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
  75         "mmcargs=setenv bootargs console=${console},${baudrate} " \
  76                 "root=${mmcroot}\0" \
  77         "loadbootscript=" \
  78                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
  79         "bootscript=echo Running bootscript from mmc ...; " \
  80                 "source\0" \
  81         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
  82         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
  83         "mmcboot=echo Booting from mmc ...; " \
  84                 "run mmcargs; " \
  85                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
  86                         "if run loadfdt; then " \
  87                                 "bootz ${loadaddr} - ${fdt_addr}; " \
  88                         "else " \
  89                                 "if test ${boot_fdt} = try; then " \
  90                                         "bootz; " \
  91                                 "else " \
  92                                         "echo WARN: Cannot load the DT; " \
  93                                 "fi; " \
  94                         "fi; " \
  95                 "else " \
  96                         "bootz; " \
  97                 "fi;\0" \
  98         "netargs=setenv bootargs console=${console},${baudrate} " \
  99                 "root=/dev/nfs " \
 100         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 101                 "netboot=echo Booting from net ...; " \
 102                 "run netargs; " \
 103                 "if test ${ip_dyn} = yes; then " \
 104                         "setenv get_cmd dhcp; " \
 105                 "else " \
 106                         "setenv get_cmd tftp; " \
 107                 "fi; " \
 108                 "${get_cmd} ${image}; " \
 109                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 110                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 111                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 112                         "else " \
 113                                 "if test ${boot_fdt} = try; then " \
 114                                         "bootz; " \
 115                                 "else " \
 116                                         "echo WARN: Cannot load the DT; " \
 117                                 "fi; " \
 118                         "fi; " \
 119                 "else " \
 120                         "bootz; " \
 121                 "fi;\0"
 122
 123 #define CONFIG_BOOTCOMMAND \
 124            "mmc dev ${mmcdev};" \
 125            "mmc dev ${mmcdev}; if mmc rescan; then " \
 126                    "if run loadbootscript; then " \
 127                            "run bootscript; " \
 128                    "else " \
 129                            "if run loadimage; then " \
 130                                    "run mmcboot; " \
 131                            "else run netboot; " \
 132                            "fi; " \
 133                    "fi; " \
 134            "else run netboot; fi"
 135
 136 /* Miscellaneous configurable options */
 137 #define CONFIG_SYS_MEMTEST_START        0x80000000
 138 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + SZ_512M)
 139
 140 #define CONFIG_STACKSIZE                SZ_128K
 141
 142 /* Physical Memory Map */
 143 #define CONFIG_NR_DRAM_BANKS            1
 144 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 145 #define PHYS_SDRAM_SIZE                 SZ_1G
 146
 147 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 148 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 149 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 150
 151 #define CONFIG_SYS_INIT_SP_OFFSET \
 152         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 153 #define CONFIG_SYS_INIT_SP_ADDR \
 154         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 155
 156 /* Environment organization */
 157 #define CONFIG_ENV_SIZE                 SZ_8K
 158
 159 #if defined CONFIG_SYS_BOOT_SPINOR
 160 #define CONFIG_ENV_IS_IN_SPI_FLASH
 161 #define CONFIG_ENV_OFFSET               (768 * 1024)
 162 #define CONFIG_ENV_SECT_SIZE            (64 * 1024)
 163 #define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
 164 #define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
 165 #define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
 166 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
 167 #else
 168 #define CONFIG_ENV_OFFSET               (8 * SZ_64K)
 169 #define CONFIG_ENV_IS_IN_MMC
 170 #endif
 171
 172 #define CONFIG_CMD_SF
 173 #ifdef CONFIG_CMD_SF
 174 #define CONFIG_SPI_FLASH_STMICRO
 175 #define CONFIG_MXC_SPI
 176 #define CONFIG_SF_DEFAULT_BUS           0
 177 #define CONFIG_SF_DEFAULT_CS            0
 178 #define CONFIG_SF_DEFAULT_SPEED         20000000
 179 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
 180 #endif
 181
 182 /* USB Configs */
 183 #define CONFIG_CMD_USB
 184 #ifdef CONFIG_CMD_USB
 185 #define CONFIG_USB_EHCI
 186 #define CONFIG_USB_EHCI_MX6
 187 #define CONFIG_USB_STORAGE
 188 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 189 #define CONFIG_USB_HOST_ETHER
 190 #define CONFIG_USB_ETHER_ASIX
 191 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
 192 #define CONFIG_MXC_USB_FLAGS            0
 193 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 194 #endif
 195
 196 #define CONFIG_SYS_FSL_USDHC_NUM        3
 197 #if defined(CONFIG_ENV_IS_IN_MMC)
 198 #define CONFIG_SYS_MMC_ENV_DEV          1       /* SDHC2*/
 199 #endif
 200
 201 #define CONFIG_IMX_THERMAL
 202
 203 #endif                          /* __CONFIG_H */