include/configs/mx6slevk.h

   1 /*
   2  * Copyright 2013 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Freescale i.MX6SL EVK board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #include "mx6_common.h"
  13
  14 #ifdef CONFIG_SPL
  15 #include "imx6_spl.h"
  16 #endif
  17
  18 #define MACH_TYPE_MX6SLEVK              4307
  19 #define CONFIG_MACH_TYPE                MACH_TYPE_MX6SLEVK
  20
  21 /* Size of malloc() pool */
  22 #define CONFIG_SYS_MALLOC_LEN           (3 * SZ_1M)
  23
  24 #define CONFIG_BOARD_EARLY_INIT_F
  25
  26 #define CONFIG_MXC_UART
  27 #define CONFIG_MXC_UART_BASE            UART1_IPS_BASE_ADDR
  28
  29 /* MMC Configs */
  30 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC2_BASE_ADDR
  31
  32 /* I2C Configs */
  33 #define CONFIG_SYS_I2C
  34 #define CONFIG_SYS_I2C_MXC
  35 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  36 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  37 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  38 #define CONFIG_SYS_I2C_SPEED              100000
  39
  40 /* PMIC */
  41 #define CONFIG_POWER
  42 #define CONFIG_POWER_I2C
  43 #define CONFIG_POWER_PFUZE100
  44 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
  45
  46 #define CONFIG_FEC_MXC
  47 #define CONFIG_MII
  48 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  49 #define CONFIG_FEC_XCV_TYPE             RMII
  50 #define CONFIG_FEC_MXC_PHYADDR          0
  51
  52 #define CONFIG_PHYLIB
  53 #define CONFIG_PHY_SMSC
  54
  55 #define CONFIG_EXTRA_ENV_SETTINGS \
  56         "script=boot.scr\0" \
  57         "image=zImage\0" \
  58         "console=ttymxc0\0" \
  59         "fdt_high=0xffffffff\0" \
  60         "initrd_high=0xffffffff\0" \
  61         "fdt_file=imx6sl-evk.dtb\0" \
  62         "fdt_addr=0x88000000\0" \
  63         "boot_fdt=try\0" \
  64         "ip_dyn=yes\0" \
  65         "mmcdev=1\0" \
  66         "mmcpart=1\0" \
  67         "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
  68         "mmcargs=setenv bootargs console=${console},${baudrate} " \
  69                 "root=${mmcroot}\0" \
  70         "loadbootscript=" \
  71                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
  72         "bootscript=echo Running bootscript from mmc ...; " \
  73                 "source\0" \
  74         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
  75         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
  76         "mmcboot=echo Booting from mmc ...; " \
  77                 "run mmcargs; " \
  78                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
  79                         "if run loadfdt; then " \
  80                                 "bootz ${loadaddr} - ${fdt_addr}; " \
  81                         "else " \
  82                                 "if test ${boot_fdt} = try; then " \
  83                                         "bootz; " \
  84                                 "else " \
  85                                         "echo WARN: Cannot load the DT; " \
  86                                 "fi; " \
  87                         "fi; " \
  88                 "else " \
  89                         "bootz; " \
  90                 "fi;\0" \
  91         "netargs=setenv bootargs console=${console},${baudrate} " \
  92                 "root=/dev/nfs " \
  93         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
  94                 "netboot=echo Booting from net ...; " \
  95                 "run netargs; " \
  96                 "if test ${ip_dyn} = yes; then " \
  97                         "setenv get_cmd dhcp; " \
  98                 "else " \
  99                         "setenv get_cmd tftp; " \
 100                 "fi; " \
 101                 "${get_cmd} ${image}; " \
 102                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 103                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 104                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 105                         "else " \
 106                                 "if test ${boot_fdt} = try; then " \
 107                                         "bootz; " \
 108                                 "else " \
 109                                         "echo WARN: Cannot load the DT; " \
 110                                 "fi; " \
 111                         "fi; " \
 112                 "else " \
 113                         "bootz; " \
 114                 "fi;\0"
 115
 116 #define CONFIG_BOOTCOMMAND \
 117            "mmc dev ${mmcdev};" \
 118            "mmc dev ${mmcdev}; if mmc rescan; then " \
 119                    "if run loadbootscript; then " \
 120                            "run bootscript; " \
 121                    "else " \
 122                            "if run loadimage; then " \
 123                                    "run mmcboot; " \
 124                            "else run netboot; " \
 125                            "fi; " \
 126                    "fi; " \
 127            "else run netboot; fi"
 128
 129 /* Miscellaneous configurable options */
 130 #define CONFIG_SYS_MEMTEST_START        0x80000000
 131 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + SZ_512M)
 132
 133 #define CONFIG_STACKSIZE                SZ_128K
 134
 135 /* Physical Memory Map */
 136 #define CONFIG_NR_DRAM_BANKS            1
 137 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 138
 139 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 140 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 141 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 142
 143 #define CONFIG_SYS_INIT_SP_OFFSET \
 144         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 145 #define CONFIG_SYS_INIT_SP_ADDR \
 146         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 147
 148 /* Environment organization */
 149 #define CONFIG_ENV_SIZE                 SZ_8K
 150
 151 #if defined CONFIG_SYS_BOOT_SPINOR
 152 #define CONFIG_ENV_IS_IN_SPI_FLASH
 153 #define CONFIG_ENV_OFFSET               (768 * 1024)
 154 #define CONFIG_ENV_SECT_SIZE            (64 * 1024)
 155 #define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
 156 #define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
 157 #define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
 158 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
 159 #else
 160 #define CONFIG_ENV_OFFSET               (8 * SZ_64K)
 161 #define CONFIG_ENV_IS_IN_MMC
 162 #endif
 163
 164 #ifdef CONFIG_CMD_SF
 165 #define CONFIG_MXC_SPI
 166 #define CONFIG_SF_DEFAULT_BUS           0
 167 #define CONFIG_SF_DEFAULT_CS            0
 168 #define CONFIG_SF_DEFAULT_SPEED         20000000
 169 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
 170 #endif
 171
 172 /* USB Configs */
 173 #ifdef CONFIG_CMD_USB
 174 #define CONFIG_USB_EHCI
 175 #define CONFIG_USB_EHCI_MX6
 176 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 177 #define CONFIG_USB_HOST_ETHER
 178 #define CONFIG_USB_ETHER_ASIX
 179 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
 180 #define CONFIG_MXC_USB_FLAGS            0
 181 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 182 #endif
 183
 184 #define CONFIG_SYS_FSL_USDHC_NUM        3
 185 #if defined(CONFIG_ENV_IS_IN_MMC)
 186 #define CONFIG_SYS_MMC_ENV_DEV          1       /* SDHC2*/
 187 #endif
 188
 189 #define CONFIG_IMX_THERMAL
 190
 191 #endif                          /* __CONFIG_H */