include/configs/mx6slevk.h

   1 /*
   2  * Copyright 2013 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Freescale i.MX6SL EVK board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #include "mx6_common.h"
  13
  14 #define CONFIG_MX6
  15 #define CONFIG_DISPLAY_CPUINFO
  16 #define CONFIG_DISPLAY_BOARDINFO
  17
  18 #define MACH_TYPE_MX6SLEVK              4307
  19 #define CONFIG_MACH_TYPE                MACH_TYPE_MX6SLEVK
  20
  21 #define CONFIG_CMDLINE_TAG
  22 #define CONFIG_SETUP_MEMORY_TAGS
  23 #define CONFIG_INITRD_TAG
  24 #define CONFIG_REVISION_TAG
  25
  26 #define CONFIG_SYS_GENERIC_BOARD
  27
  28 /* Size of malloc() pool */
  29 #define CONFIG_SYS_MALLOC_LEN           (3 * SZ_1M)
  30
  31 #define CONFIG_BOARD_EARLY_INIT_F
  32 #define CONFIG_MXC_GPIO
  33
  34 #define CONFIG_MXC_UART
  35 #define CONFIG_MXC_UART_BASE            UART1_IPS_BASE_ADDR
  36
  37 /* MMC Configs */
  38 #define CONFIG_FSL_ESDHC
  39 #define CONFIG_FSL_USDHC
  40 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC2_BASE_ADDR
  41
  42 #define CONFIG_MMC
  43 #define CONFIG_CMD_MMC
  44 #define CONFIG_GENERIC_MMC
  45 #define CONFIG_CMD_FAT
  46 #define CONFIG_DOS_PARTITION
  47
  48 /* I2C Configs */
  49 #define CONFIG_CMD_I2C
  50 #define CONFIG_SYS_I2C
  51 #define CONFIG_SYS_I2C_MXC
  52 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  53 #define CONFIG_SYS_I2C_SPEED              100000
  54
  55 /* PMIC */
  56 #define CONFIG_POWER
  57 #define CONFIG_POWER_I2C
  58 #define CONFIG_POWER_PFUZE100
  59 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
  60
  61 #define CONFIG_CMD_PING
  62 #define CONFIG_CMD_DHCP
  63 #define CONFIG_CMD_MII
  64 #define CONFIG_CMD_NET
  65 #define CONFIG_FEC_MXC
  66 #define CONFIG_MII
  67 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  68 #define CONFIG_FEC_XCV_TYPE             RMII
  69 #define CONFIG_ETHPRIME                 "FEC"
  70 #define CONFIG_FEC_MXC_PHYADDR          0
  71
  72 #define CONFIG_PHYLIB
  73 #define CONFIG_PHY_SMSC
  74
  75 /* allow to overwrite serial and ethaddr */
  76 #define CONFIG_ENV_OVERWRITE
  77 #define CONFIG_CONS_INDEX               1
  78 #define CONFIG_BAUDRATE                 115200
  79
  80 /* Command definition */
  81
  82 #define CONFIG_BOOTDELAY                3
  83
  84 #define CONFIG_LOADADDR                 0x82000000
  85 #define CONFIG_SYS_TEXT_BASE            0x87800000
  86
  87 #define CONFIG_EXTRA_ENV_SETTINGS \
  88         "script=boot.scr\0" \
  89         "image=zImage\0" \
  90         "console=ttymxc0\0" \
  91         "fdt_high=0xffffffff\0" \
  92         "initrd_high=0xffffffff\0" \
  93         "fdt_file=imx6sl-evk.dtb\0" \
  94         "fdt_addr=0x88000000\0" \
  95         "boot_fdt=try\0" \
  96         "ip_dyn=yes\0" \
  97         "mmcdev=1\0" \
  98         "mmcpart=1\0" \
  99         "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
 100         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 101                 "root=${mmcroot}\0" \
 102         "loadbootscript=" \
 103                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 104         "bootscript=echo Running bootscript from mmc ...; " \
 105                 "source\0" \
 106         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 107         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 108         "mmcboot=echo Booting from mmc ...; " \
 109                 "run mmcargs; " \
 110                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 111                         "if run loadfdt; then " \
 112                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 113                         "else " \
 114                                 "if test ${boot_fdt} = try; then " \
 115                                         "bootz; " \
 116                                 "else " \
 117                                         "echo WARN: Cannot load the DT; " \
 118                                 "fi; " \
 119                         "fi; " \
 120                 "else " \
 121                         "bootz; " \
 122                 "fi;\0" \
 123         "netargs=setenv bootargs console=${console},${baudrate} " \
 124                 "root=/dev/nfs " \
 125         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 126                 "netboot=echo Booting from net ...; " \
 127                 "run netargs; " \
 128                 "if test ${ip_dyn} = yes; then " \
 129                         "setenv get_cmd dhcp; " \
 130                 "else " \
 131                         "setenv get_cmd tftp; " \
 132                 "fi; " \
 133                 "${get_cmd} ${image}; " \
 134                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 135                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 136                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 137                         "else " \
 138                                 "if test ${boot_fdt} = try; then " \
 139                                         "bootz; " \
 140                                 "else " \
 141                                         "echo WARN: Cannot load the DT; " \
 142                                 "fi; " \
 143                         "fi; " \
 144                 "else " \
 145                         "bootz; " \
 146                 "fi;\0"
 147
 148 #define CONFIG_BOOTCOMMAND \
 149            "mmc dev ${mmcdev};" \
 150            "mmc dev ${mmcdev}; if mmc rescan; then " \
 151                    "if run loadbootscript; then " \
 152                            "run bootscript; " \
 153                    "else " \
 154                            "if run loadimage; then " \
 155                                    "run mmcboot; " \
 156                            "else run netboot; " \
 157                            "fi; " \
 158                    "fi; " \
 159            "else run netboot; fi"
 160
 161 /* Miscellaneous configurable options */
 162 #define CONFIG_SYS_LONGHELP
 163 #define CONFIG_SYS_HUSH_PARSER
 164 #define CONFIG_AUTO_COMPLETE
 165 #define CONFIG_SYS_CBSIZE               256
 166
 167 #define CONFIG_SYS_MAXARGS              16
 168 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 169
 170 #define CONFIG_SYS_MEMTEST_START        0x80000000
 171 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + SZ_512M)
 172
 173 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 174
 175 #define CONFIG_CMDLINE_EDITING
 176 #define CONFIG_STACKSIZE                SZ_128K
 177
 178 /* Physical Memory Map */
 179 #define CONFIG_NR_DRAM_BANKS            1
 180 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 181 #define PHYS_SDRAM_SIZE                 SZ_1G
 182
 183 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 184 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 185 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 186
 187 #define CONFIG_SYS_INIT_SP_OFFSET \
 188         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 189 #define CONFIG_SYS_INIT_SP_ADDR \
 190         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 191
 192 /* Environment organization */
 193 #define CONFIG_ENV_SIZE                 SZ_8K
 194
 195 #if defined CONFIG_SYS_BOOT_SPINOR
 196 #define CONFIG_ENV_IS_IN_SPI_FLASH
 197 #define CONFIG_ENV_OFFSET               (768 * 1024)
 198 #define CONFIG_ENV_SECT_SIZE            (64 * 1024)
 199 #define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
 200 #define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
 201 #define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
 202 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
 203 #else
 204 #define CONFIG_ENV_OFFSET               (8 * SZ_64K)
 205 #define CONFIG_ENV_IS_IN_MMC
 206 #endif
 207
 208 #define CONFIG_OF_LIBFDT
 209 #define CONFIG_CMD_BOOTZ
 210
 211 #ifndef CONFIG_SYS_DCACHE_OFF
 212 #define CONFIG_CMD_CACHE
 213 #endif
 214
 215 #define CONFIG_CMD_SF
 216 #ifdef CONFIG_CMD_SF
 217 #define CONFIG_SPI_FLASH
 218 #define CONFIG_SPI_FLASH_STMICRO
 219 #define CONFIG_MXC_SPI
 220 #define CONFIG_SF_DEFAULT_BUS           0
 221 #define CONFIG_SF_DEFAULT_CS            0
 222 #define CONFIG_SF_DEFAULT_SPEED         20000000
 223 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
 224 #endif
 225
 226 /* USB Configs */
 227 #define CONFIG_CMD_USB
 228 #ifdef CONFIG_CMD_USB
 229 #define CONFIG_USB_EHCI
 230 #define CONFIG_USB_EHCI_MX6
 231 #define CONFIG_USB_STORAGE
 232 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 233 #define CONFIG_USB_HOST_ETHER
 234 #define CONFIG_USB_ETHER_ASIX
 235 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
 236 #define CONFIG_MXC_USB_FLAGS            0
 237 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 238 #endif
 239
 240 #define CONFIG_SYS_FSL_USDHC_NUM        3
 241 #if defined(CONFIG_ENV_IS_IN_MMC)
 242 #define CONFIG_SYS_MMC_ENV_DEV          1       /* SDHC2*/
 243 #endif
 244
 245 #define CONFIG_IMX6_THERMAL
 246
 247 #define CONFIG_CMD_FUSE
 248 #if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL)
 249 #define CONFIG_MXC_OCOTP
 250 #endif
 251
 252 #endif                          /* __CONFIG_H */