include/configs/mx6sabre_common.h

   1 /*
   2  * Copyright (C) 2012 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Freescale i.MX6Q SabreSD board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __MX6QSABRE_COMMON_CONFIG_H
  10 #define __MX6QSABRE_COMMON_CONFIG_H
  11
  12 #include "mx6_common.h"
  13
  14 #define CONFIG_IMX6_THERMAL
  15
  16 /* Size of malloc() pool */
  17 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  18
  19 #define CONFIG_BOARD_EARLY_INIT_F
  20 #define CONFIG_BOARD_LATE_INIT
  21
  22 #define CONFIG_MXC_UART
  23
  24 #define CONFIG_CMD_FUSE
  25 #if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL)
  26 #define CONFIG_MXC_OCOTP
  27 #endif
  28
  29 /* MMC Configs */
  30 #define CONFIG_FSL_ESDHC
  31 #define CONFIG_FSL_USDHC
  32 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  33
  34 #define CONFIG_MMC
  35 #define CONFIG_CMD_MMC
  36 #define CONFIG_GENERIC_MMC
  37 #define CONFIG_BOUNCE_BUFFER
  38
  39 #define CONFIG_CMD_PING
  40 #define CONFIG_CMD_DHCP
  41 #define CONFIG_CMD_MII
  42 #define CONFIG_CMD_NET
  43 #define CONFIG_FEC_MXC
  44 #define CONFIG_MII
  45 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  46 #define CONFIG_FEC_XCV_TYPE             RGMII
  47 #define CONFIG_ETHPRIME                 "FEC"
  48 #define CONFIG_FEC_MXC_PHYADDR          1
  49
  50 #define CONFIG_PHYLIB
  51 #define CONFIG_PHY_ATHEROS
  52
  53 #define CONFIG_CMD_SF
  54 #ifdef CONFIG_CMD_SF
  55 #define CONFIG_SPI_FLASH
  56 #define CONFIG_SPI_FLASH_STMICRO
  57 #define CONFIG_MXC_SPI
  58 #define CONFIG_SF_DEFAULT_BUS           0
  59 #define CONFIG_SF_DEFAULT_CS            0
  60 #define CONFIG_SF_DEFAULT_SPEED         20000000
  61 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
  62 #endif
  63
  64 /* Command definition */
  65 #define CONFIG_CMD_BMODE
  66 #define CONFIG_CMD_SETEXPR
  67
  68 #ifdef CONFIG_SUPPORT_EMMC_BOOT
  69 #define EMMC_ENV \
  70         "emmcdev=2\0" \
  71         "update_emmc_firmware=" \
  72                 "if test ${ip_dyn} = yes; then " \
  73                         "setenv get_cmd dhcp; " \
  74                 "else " \
  75                         "setenv get_cmd tftp; " \
  76                 "fi; " \
  77                 "if ${get_cmd} ${update_sd_firmware_filename}; then " \
  78                         "if mmc dev ${emmcdev} 1; then "        \
  79                                 "setexpr fw_sz ${filesize} / 0x200; " \
  80                                 "setexpr fw_sz ${fw_sz} + 1; "  \
  81                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
  82                         "fi; "  \
  83                 "fi\0"
  84 #else
  85 #define EMMC_ENV ""
  86 #endif
  87
  88 #define CONFIG_EXTRA_ENV_SETTINGS \
  89         "script=boot.scr\0" \
  90         "image=zImage\0" \
  91         "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
  92         "fdt_addr=0x18000000\0" \
  93         "boot_fdt=try\0" \
  94         "ip_dyn=yes\0" \
  95         "console=" CONFIG_CONSOLE_DEV "\0" \
  96         "fdt_high=0xffffffff\0"   \
  97         "initrd_high=0xffffffff\0" \
  98         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
  99         "mmcpart=1\0" \
 100         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
 101         "update_sd_firmware=" \
 102                 "if test ${ip_dyn} = yes; then " \
 103                         "setenv get_cmd dhcp; " \
 104                 "else " \
 105                         "setenv get_cmd tftp; " \
 106                 "fi; " \
 107                 "if mmc dev ${mmcdev}; then "   \
 108                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 109                                 "setexpr fw_sz ${filesize} / 0x200; " \
 110                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 111                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 112                         "fi; "  \
 113                 "fi\0" \
 114         EMMC_ENV          \
 115         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 116                 "root=${mmcroot}\0" \
 117         "loadbootscript=" \
 118                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 119         "bootscript=echo Running bootscript from mmc ...; " \
 120                 "source\0" \
 121         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 122         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 123         "mmcboot=echo Booting from mmc ...; " \
 124                 "run mmcargs; " \
 125                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 126                         "if run loadfdt; then " \
 127                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 128                         "else " \
 129                                 "if test ${boot_fdt} = try; then " \
 130                                         "bootz; " \
 131                                 "else " \
 132                                         "echo WARN: Cannot load the DT; " \
 133                                 "fi; " \
 134                         "fi; " \
 135                 "else " \
 136                         "bootz; " \
 137                 "fi;\0" \
 138         "netargs=setenv bootargs console=${console},${baudrate} " \
 139                 "root=/dev/nfs " \
 140                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 141         "netboot=echo Booting from net ...; " \
 142                 "run netargs; " \
 143                 "if test ${ip_dyn} = yes; then " \
 144                         "setenv get_cmd dhcp; " \
 145                 "else " \
 146                         "setenv get_cmd tftp; " \
 147                 "fi; " \
 148                 "${get_cmd} ${image}; " \
 149                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 150                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 151                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 152                         "else " \
 153                                 "if test ${boot_fdt} = try; then " \
 154                                         "bootz; " \
 155                                 "else " \
 156                                         "echo WARN: Cannot load the DT; " \
 157                                 "fi; " \
 158                         "fi; " \
 159                 "else " \
 160                         "bootz; " \
 161                 "fi;\0"
 162
 163 #define CONFIG_BOOTCOMMAND \
 164         "mmc dev ${mmcdev};" \
 165         "if mmc rescan; then " \
 166                 "if run loadbootscript; then " \
 167                 "run bootscript; " \
 168                 "else " \
 169                         "if run loadimage; then " \
 170                                 "run mmcboot; " \
 171                         "else run netboot; " \
 172                         "fi; " \
 173                 "fi; " \
 174         "else run netboot; fi"
 175
 176 #define CONFIG_ARP_TIMEOUT     200UL
 177
 178 #define CONFIG_SYS_MEMTEST_START       0x10000000
 179 #define CONFIG_SYS_MEMTEST_END         0x10010000
 180 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 181
 182 #define CONFIG_STACKSIZE               (128 * 1024)
 183
 184 /* Physical Memory Map */
 185 #define CONFIG_NR_DRAM_BANKS           1
 186 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 187
 188 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 189 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 190 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 191
 192 #define CONFIG_SYS_INIT_SP_OFFSET \
 193         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 194 #define CONFIG_SYS_INIT_SP_ADDR \
 195         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 196
 197 /* Environment organization */
 198 #define CONFIG_ENV_SIZE                 (8 * 1024)
 199
 200 #define CONFIG_ENV_IS_IN_MMC
 201
 202 #if defined(CONFIG_ENV_IS_IN_MMC)
 203 #define CONFIG_ENV_OFFSET               (8 * 64 * 1024)
 204 #endif
 205
 206 #ifndef CONFIG_SYS_DCACHE_OFF
 207 #define CONFIG_CMD_CACHE
 208 #endif
 209
 210 /* Framebuffer */
 211 #define CONFIG_VIDEO
 212 #define CONFIG_VIDEO_IPUV3
 213 #define CONFIG_CFB_CONSOLE
 214 #define CONFIG_VGA_AS_SINGLE_DEVICE
 215 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 216 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 217 #define CONFIG_VIDEO_BMP_RLE8
 218 #define CONFIG_SPLASH_SCREEN
 219 #define CONFIG_SPLASH_SCREEN_ALIGN
 220 #define CONFIG_BMP_16BPP
 221 #define CONFIG_VIDEO_LOGO
 222 #define CONFIG_VIDEO_BMP_LOGO
 223 #define CONFIG_IPUV3_CLK 260000000
 224 #define CONFIG_IMX_HDMI
 225 #define CONFIG_IMX_VIDEO_SKIP
 226
 227 #ifndef CONFIG_SPL
 228 #define CONFIG_CI_UDC
 229 #define CONFIG_USBD_HS
 230 #define CONFIG_USB_GADGET_DUALSPEED
 231
 232 #define CONFIG_USB_GADGET
 233 #define CONFIG_CMD_USB_MASS_STORAGE
 234 #define CONFIG_USB_GADGET_MASS_STORAGE
 235 #define CONFIG_USBDOWNLOAD_GADGET
 236 #define CONFIG_USB_GADGET_VBUS_DRAW     2
 237
 238 #define CONFIG_G_DNL_VENDOR_NUM         0x0525
 239 #define CONFIG_G_DNL_PRODUCT_NUM        0xa4a5
 240 #define CONFIG_G_DNL_MANUFACTURER       "FSL"
 241 #endif
 242
 243 #endif                         /* __MX6QSABRE_COMMON_CONFIG_H */