include/configs/mx6sabre_common.h

   1 /*
   2  * Copyright (C) 2012 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Freescale i.MX6Q SabreSD board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __MX6QSABRE_COMMON_CONFIG_H
  10 #define __MX6QSABRE_COMMON_CONFIG_H
  11
  12 #include "mx6_common.h"
  13
  14 #define CONFIG_IMX6_THERMAL
  15
  16 /* Size of malloc() pool */
  17 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  18
  19 #define CONFIG_BOARD_EARLY_INIT_F
  20 #define CONFIG_BOARD_LATE_INIT
  21
  22 #define CONFIG_MXC_UART
  23
  24 #define CONFIG_CMD_FUSE
  25 #if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL)
  26 #define CONFIG_MXC_OCOTP
  27 #endif
  28
  29 /* MMC Configs */
  30 #define CONFIG_FSL_ESDHC
  31 #define CONFIG_FSL_USDHC
  32 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  33
  34 #define CONFIG_MMC
  35 #define CONFIG_CMD_MMC
  36 #define CONFIG_GENERIC_MMC
  37 #define CONFIG_BOUNCE_BUFFER
  38 #define CONFIG_CMD_EXT2
  39 #define CONFIG_CMD_EXT4
  40 #define CONFIG_CMD_EXT4_WRITE
  41 #define CONFIG_CMD_FAT
  42 #define CONFIG_DOS_PARTITION
  43
  44 #define CONFIG_CMD_PING
  45 #define CONFIG_CMD_DHCP
  46 #define CONFIG_CMD_MII
  47 #define CONFIG_CMD_NET
  48 #define CONFIG_FEC_MXC
  49 #define CONFIG_MII
  50 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  51 #define CONFIG_FEC_XCV_TYPE             RGMII
  52 #define CONFIG_ETHPRIME                 "FEC"
  53 #define CONFIG_FEC_MXC_PHYADDR          1
  54
  55 #define CONFIG_PHYLIB
  56 #define CONFIG_PHY_ATHEROS
  57
  58 #define CONFIG_CMD_SF
  59 #ifdef CONFIG_CMD_SF
  60 #define CONFIG_SPI_FLASH
  61 #define CONFIG_SPI_FLASH_STMICRO
  62 #define CONFIG_MXC_SPI
  63 #define CONFIG_SF_DEFAULT_BUS           0
  64 #define CONFIG_SF_DEFAULT_CS            0
  65 #define CONFIG_SF_DEFAULT_SPEED         20000000
  66 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
  67 #endif
  68
  69 /* allow to overwrite serial and ethaddr */
  70 #define CONFIG_ENV_OVERWRITE
  71 #define CONFIG_CONS_INDEX              1
  72 #define CONFIG_BAUDRATE                        115200
  73
  74 /* Command definition */
  75 #define CONFIG_CMD_BMODE
  76 #define CONFIG_CMD_BOOTZ
  77 #define CONFIG_CMD_SETEXPR
  78
  79 #ifdef CONFIG_SUPPORT_EMMC_BOOT
  80 #define EMMC_ENV \
  81         "emmcdev=2\0" \
  82         "update_emmc_firmware=" \
  83                 "if test ${ip_dyn} = yes; then " \
  84                         "setenv get_cmd dhcp; " \
  85                 "else " \
  86                         "setenv get_cmd tftp; " \
  87                 "fi; " \
  88                 "if ${get_cmd} ${update_sd_firmware_filename}; then " \
  89                         "if mmc dev ${emmcdev} 1; then "        \
  90                                 "setexpr fw_sz ${filesize} / 0x200; " \
  91                                 "setexpr fw_sz ${fw_sz} + 1; "  \
  92                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
  93                         "fi; "  \
  94                 "fi\0"
  95 #else
  96 #define EMMC_ENV ""
  97 #endif
  98
  99 #define CONFIG_EXTRA_ENV_SETTINGS \
 100         "script=boot.scr\0" \
 101         "image=zImage\0" \
 102         "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
 103         "fdt_addr=0x18000000\0" \
 104         "boot_fdt=try\0" \
 105         "ip_dyn=yes\0" \
 106         "console=" CONFIG_CONSOLE_DEV "\0" \
 107         "fdt_high=0xffffffff\0"   \
 108         "initrd_high=0xffffffff\0" \
 109         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
 110         "mmcpart=1\0" \
 111         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
 112         "update_sd_firmware=" \
 113                 "if test ${ip_dyn} = yes; then " \
 114                         "setenv get_cmd dhcp; " \
 115                 "else " \
 116                         "setenv get_cmd tftp; " \
 117                 "fi; " \
 118                 "if mmc dev ${mmcdev}; then "   \
 119                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 120                                 "setexpr fw_sz ${filesize} / 0x200; " \
 121                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 122                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 123                         "fi; "  \
 124                 "fi\0" \
 125         EMMC_ENV          \
 126         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 127                 "root=${mmcroot}\0" \
 128         "loadbootscript=" \
 129                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 130         "bootscript=echo Running bootscript from mmc ...; " \
 131                 "source\0" \
 132         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 133         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 134         "mmcboot=echo Booting from mmc ...; " \
 135                 "run mmcargs; " \
 136                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 137                         "if run loadfdt; then " \
 138                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 139                         "else " \
 140                                 "if test ${boot_fdt} = try; then " \
 141                                         "bootz; " \
 142                                 "else " \
 143                                         "echo WARN: Cannot load the DT; " \
 144                                 "fi; " \
 145                         "fi; " \
 146                 "else " \
 147                         "bootz; " \
 148                 "fi;\0" \
 149         "netargs=setenv bootargs console=${console},${baudrate} " \
 150                 "root=/dev/nfs " \
 151                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 152         "netboot=echo Booting from net ...; " \
 153                 "run netargs; " \
 154                 "if test ${ip_dyn} = yes; then " \
 155                         "setenv get_cmd dhcp; " \
 156                 "else " \
 157                         "setenv get_cmd tftp; " \
 158                 "fi; " \
 159                 "${get_cmd} ${image}; " \
 160                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 161                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 162                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 163                         "else " \
 164                                 "if test ${boot_fdt} = try; then " \
 165                                         "bootz; " \
 166                                 "else " \
 167                                         "echo WARN: Cannot load the DT; " \
 168                                 "fi; " \
 169                         "fi; " \
 170                 "else " \
 171                         "bootz; " \
 172                 "fi;\0"
 173
 174 #define CONFIG_BOOTCOMMAND \
 175         "mmc dev ${mmcdev};" \
 176         "if mmc rescan; then " \
 177                 "if run loadbootscript; then " \
 178                 "run bootscript; " \
 179                 "else " \
 180                         "if run loadimage; then " \
 181                                 "run mmcboot; " \
 182                         "else run netboot; " \
 183                         "fi; " \
 184                 "fi; " \
 185         "else run netboot; fi"
 186
 187 #define CONFIG_ARP_TIMEOUT     200UL
 188
 189 /* Miscellaneous configurable options */
 190 #define CONFIG_SYS_LONGHELP
 191 #define CONFIG_SYS_HUSH_PARSER
 192 #define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 193 #define CONFIG_AUTO_COMPLETE
 194 #define CONFIG_SYS_CBSIZE              256
 195 #define CONFIG_SYS_MAXARGS             16
 196 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 197
 198 #define CONFIG_SYS_MEMTEST_START       0x10000000
 199 #define CONFIG_SYS_MEMTEST_END         0x10010000
 200 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 201
 202 #define CONFIG_CMDLINE_EDITING
 203 #define CONFIG_STACKSIZE               (128 * 1024)
 204
 205 /* Physical Memory Map */
 206 #define CONFIG_NR_DRAM_BANKS           1
 207 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 208
 209 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 210 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 211 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 212
 213 #define CONFIG_SYS_INIT_SP_OFFSET \
 214         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 215 #define CONFIG_SYS_INIT_SP_ADDR \
 216         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 217
 218 /* Environment organization */
 219 #define CONFIG_ENV_SIZE                 (8 * 1024)
 220
 221 #define CONFIG_ENV_IS_IN_MMC
 222
 223 #if defined(CONFIG_ENV_IS_IN_MMC)
 224 #define CONFIG_ENV_OFFSET               (8 * 64 * 1024)
 225 #endif
 226
 227 #define CONFIG_OF_LIBFDT
 228
 229 #ifndef CONFIG_SYS_DCACHE_OFF
 230 #define CONFIG_CMD_CACHE
 231 #endif
 232
 233 /* Framebuffer */
 234 #define CONFIG_VIDEO
 235 #define CONFIG_VIDEO_IPUV3
 236 #define CONFIG_CFB_CONSOLE
 237 #define CONFIG_VGA_AS_SINGLE_DEVICE
 238 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 239 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 240 #define CONFIG_VIDEO_BMP_RLE8
 241 #define CONFIG_SPLASH_SCREEN
 242 #define CONFIG_SPLASH_SCREEN_ALIGN
 243 #define CONFIG_BMP_16BPP
 244 #define CONFIG_VIDEO_LOGO
 245 #define CONFIG_VIDEO_BMP_LOGO
 246 #define CONFIG_IPUV3_CLK 260000000
 247 #define CONFIG_IMX_HDMI
 248 #define CONFIG_IMX_VIDEO_SKIP
 249
 250 #ifndef CONFIG_SPL
 251 #define CONFIG_CI_UDC
 252 #define CONFIG_USBD_HS
 253 #define CONFIG_USB_GADGET_DUALSPEED
 254
 255 #define CONFIG_USB_GADGET
 256 #define CONFIG_CMD_USB_MASS_STORAGE
 257 #define CONFIG_USB_GADGET_MASS_STORAGE
 258 #define CONFIG_USBDOWNLOAD_GADGET
 259 #define CONFIG_USB_GADGET_VBUS_DRAW     2
 260
 261 #define CONFIG_G_DNL_VENDOR_NUM         0x0525
 262 #define CONFIG_G_DNL_PRODUCT_NUM        0xa4a5
 263 #define CONFIG_G_DNL_MANUFACTURER       "FSL"
 264 #endif
 265
 266 #endif                         /* __MX6QSABRE_COMMON_CONFIG_H */