include/configs/mx6sabre_common.h

   1 /*
   2  * Copyright (C) 2012 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Freescale i.MX6Q SabreSD board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __MX6QSABRE_COMMON_CONFIG_H
  10 #define __MX6QSABRE_COMMON_CONFIG_H
  11
  12 #define CONFIG_MX6
  13
  14 #include "mx6_common.h"
  15
  16 #define CONFIG_DISPLAY_CPUINFO
  17 #define CONFIG_DISPLAY_BOARDINFO
  18
  19 #define CONFIG_CMDLINE_TAG
  20 #define CONFIG_SETUP_MEMORY_TAGS
  21 #define CONFIG_INITRD_TAG
  22 #define CONFIG_REVISION_TAG
  23
  24 #define CONFIG_IMX6_THERMAL
  25
  26 #define CONFIG_SYS_GENERIC_BOARD
  27
  28 /* Size of malloc() pool */
  29 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  30
  31 #define CONFIG_BOARD_EARLY_INIT_F
  32 #define CONFIG_BOARD_LATE_INIT
  33 #define CONFIG_MXC_GPIO
  34
  35 #define CONFIG_MXC_UART
  36
  37 #define CONFIG_CMD_FUSE
  38 #if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL)
  39 #define CONFIG_MXC_OCOTP
  40 #endif
  41
  42 /* MMC Configs */
  43 #define CONFIG_FSL_ESDHC
  44 #define CONFIG_FSL_USDHC
  45 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  46
  47 #define CONFIG_MMC
  48 #define CONFIG_CMD_MMC
  49 #define CONFIG_GENERIC_MMC
  50 #define CONFIG_BOUNCE_BUFFER
  51 #define CONFIG_CMD_EXT2
  52 #define CONFIG_CMD_EXT4
  53 #define CONFIG_CMD_EXT4_WRITE
  54 #define CONFIG_CMD_FAT
  55 #define CONFIG_DOS_PARTITION
  56
  57 #define CONFIG_CMD_PING
  58 #define CONFIG_CMD_DHCP
  59 #define CONFIG_CMD_MII
  60 #define CONFIG_CMD_NET
  61 #define CONFIG_FEC_MXC
  62 #define CONFIG_MII
  63 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  64 #define CONFIG_FEC_XCV_TYPE             RGMII
  65 #define CONFIG_ETHPRIME                 "FEC"
  66 #define CONFIG_FEC_MXC_PHYADDR          1
  67
  68 #define CONFIG_PHYLIB
  69 #define CONFIG_PHY_ATHEROS
  70
  71 #define CONFIG_CMD_SF
  72 #ifdef CONFIG_CMD_SF
  73 #define CONFIG_SPI_FLASH
  74 #define CONFIG_SPI_FLASH_STMICRO
  75 #define CONFIG_MXC_SPI
  76 #define CONFIG_SF_DEFAULT_BUS           0
  77 #define CONFIG_SF_DEFAULT_CS            0
  78 #define CONFIG_SF_DEFAULT_SPEED         20000000
  79 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
  80 #endif
  81
  82 /* allow to overwrite serial and ethaddr */
  83 #define CONFIG_ENV_OVERWRITE
  84 #define CONFIG_CONS_INDEX              1
  85 #define CONFIG_BAUDRATE                        115200
  86
  87 /* Command definition */
  88 #define CONFIG_CMD_BMODE
  89 #define CONFIG_CMD_BOOTZ
  90 #define CONFIG_CMD_SETEXPR
  91
  92 #define CONFIG_BOOTDELAY               1
  93
  94 #define CONFIG_LOADADDR                        0x12000000
  95 #define CONFIG_SYS_TEXT_BASE           0x17800000
  96
  97 #ifdef CONFIG_SUPPORT_EMMC_BOOT
  98 #define EMMC_ENV \
  99         "emmcdev=2\0" \
 100         "update_emmc_firmware=" \
 101                 "if test ${ip_dyn} = yes; then " \
 102                         "setenv get_cmd dhcp; " \
 103                 "else " \
 104                         "setenv get_cmd tftp; " \
 105                 "fi; " \
 106                 "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 107                         "if mmc dev ${emmcdev} 1; then "        \
 108                                 "setexpr fw_sz ${filesize} / 0x200; " \
 109                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 110                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 111                         "fi; "  \
 112                 "fi\0"
 113 #else
 114 #define EMMC_ENV ""
 115 #endif
 116
 117 #define CONFIG_EXTRA_ENV_SETTINGS \
 118         "script=boot.scr\0" \
 119         "image=zImage\0" \
 120         "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
 121         "fdt_addr=0x18000000\0" \
 122         "boot_fdt=try\0" \
 123         "ip_dyn=yes\0" \
 124         "console=" CONFIG_CONSOLE_DEV "\0" \
 125         "fdt_high=0xffffffff\0"   \
 126         "initrd_high=0xffffffff\0" \
 127         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
 128         "mmcpart=1\0" \
 129         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
 130         "update_sd_firmware=" \
 131                 "if test ${ip_dyn} = yes; then " \
 132                         "setenv get_cmd dhcp; " \
 133                 "else " \
 134                         "setenv get_cmd tftp; " \
 135                 "fi; " \
 136                 "if mmc dev ${mmcdev}; then "   \
 137                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 138                                 "setexpr fw_sz ${filesize} / 0x200; " \
 139                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 140                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 141                         "fi; "  \
 142                 "fi\0" \
 143         EMMC_ENV          \
 144         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 145                 "root=${mmcroot}\0" \
 146         "loadbootscript=" \
 147                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 148         "bootscript=echo Running bootscript from mmc ...; " \
 149                 "source\0" \
 150         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 151         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 152         "mmcboot=echo Booting from mmc ...; " \
 153                 "run mmcargs; " \
 154                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 155                         "if run loadfdt; then " \
 156                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 157                         "else " \
 158                                 "if test ${boot_fdt} = try; then " \
 159                                         "bootz; " \
 160                                 "else " \
 161                                         "echo WARN: Cannot load the DT; " \
 162                                 "fi; " \
 163                         "fi; " \
 164                 "else " \
 165                         "bootz; " \
 166                 "fi;\0" \
 167         "netargs=setenv bootargs console=${console},${baudrate} " \
 168                 "root=/dev/nfs " \
 169                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 170         "netboot=echo Booting from net ...; " \
 171                 "run netargs; " \
 172                 "if test ${ip_dyn} = yes; then " \
 173                         "setenv get_cmd dhcp; " \
 174                 "else " \
 175                         "setenv get_cmd tftp; " \
 176                 "fi; " \
 177                 "${get_cmd} ${image}; " \
 178                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 179                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 180                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 181                         "else " \
 182                                 "if test ${boot_fdt} = try; then " \
 183                                         "bootz; " \
 184                                 "else " \
 185                                         "echo WARN: Cannot load the DT; " \
 186                                 "fi; " \
 187                         "fi; " \
 188                 "else " \
 189                         "bootz; " \
 190                 "fi;\0"
 191
 192 #define CONFIG_BOOTCOMMAND \
 193         "mmc dev ${mmcdev};" \
 194         "if mmc rescan; then " \
 195                 "if run loadbootscript; then " \
 196                 "run bootscript; " \
 197                 "else " \
 198                         "if run loadimage; then " \
 199                                 "run mmcboot; " \
 200                         "else run netboot; " \
 201                         "fi; " \
 202                 "fi; " \
 203         "else run netboot; fi"
 204
 205 #define CONFIG_ARP_TIMEOUT     200UL
 206
 207 /* Miscellaneous configurable options */
 208 #define CONFIG_SYS_LONGHELP
 209 #define CONFIG_SYS_HUSH_PARSER
 210 #define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 211 #define CONFIG_AUTO_COMPLETE
 212 #define CONFIG_SYS_CBSIZE              256
 213 #define CONFIG_SYS_MAXARGS             16
 214 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 215
 216 #define CONFIG_SYS_MEMTEST_START       0x10000000
 217 #define CONFIG_SYS_MEMTEST_END         0x10010000
 218 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 219
 220 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 221
 222 #define CONFIG_CMDLINE_EDITING
 223 #define CONFIG_STACKSIZE               (128 * 1024)
 224
 225 /* Physical Memory Map */
 226 #define CONFIG_NR_DRAM_BANKS           1
 227 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 228
 229 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 230 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 231 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 232
 233 #define CONFIG_SYS_INIT_SP_OFFSET \
 234         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 235 #define CONFIG_SYS_INIT_SP_ADDR \
 236         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 237
 238 /* Environment organization */
 239 #define CONFIG_ENV_SIZE                 (8 * 1024)
 240
 241 #define CONFIG_ENV_IS_IN_MMC
 242
 243 #if defined(CONFIG_ENV_IS_IN_MMC)
 244 #define CONFIG_ENV_OFFSET               (8 * 64 * 1024)
 245 #endif
 246
 247 #define CONFIG_OF_LIBFDT
 248
 249 #ifndef CONFIG_SYS_DCACHE_OFF
 250 #define CONFIG_CMD_CACHE
 251 #endif
 252
 253 /* Framebuffer */
 254 #define CONFIG_VIDEO
 255 #define CONFIG_VIDEO_IPUV3
 256 #define CONFIG_CFB_CONSOLE
 257 #define CONFIG_VGA_AS_SINGLE_DEVICE
 258 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 259 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 260 #define CONFIG_VIDEO_BMP_RLE8
 261 #define CONFIG_SPLASH_SCREEN
 262 #define CONFIG_SPLASH_SCREEN_ALIGN
 263 #define CONFIG_BMP_16BPP
 264 #define CONFIG_VIDEO_LOGO
 265 #define CONFIG_VIDEO_BMP_LOGO
 266 #define CONFIG_IPUV3_CLK 260000000
 267 #define CONFIG_IMX_HDMI
 268 #define CONFIG_IMX_VIDEO_SKIP
 269
 270 #ifndef CONFIG_SPL
 271 #define CONFIG_CI_UDC
 272 #define CONFIG_USBD_HS
 273 #define CONFIG_USB_GADGET_DUALSPEED
 274
 275 #define CONFIG_USB_GADGET
 276 #define CONFIG_CMD_USB_MASS_STORAGE
 277 #define CONFIG_USB_GADGET_MASS_STORAGE
 278 #define CONFIG_USBDOWNLOAD_GADGET
 279 #define CONFIG_USB_GADGET_VBUS_DRAW     2
 280
 281 #define CONFIG_G_DNL_VENDOR_NUM         0x0525
 282 #define CONFIG_G_DNL_PRODUCT_NUM        0xa4a5
 283 #define CONFIG_G_DNL_MANUFACTURER       "FSL"
 284 #endif
 285
 286 #endif                         /* __MX6QSABRE_COMMON_CONFIG_H */