include/configs/mx6sabre_common.h

   1 /*
   2  * Copyright (C) 2012 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Freescale i.MX6Q SabreSD board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __MX6QSABRE_COMMON_CONFIG_H
  10 #define __MX6QSABRE_COMMON_CONFIG_H
  11
  12 #include "mx6_common.h"
  13
  14 #define CONFIG_IMX6_THERMAL
  15
  16 /* Size of malloc() pool */
  17 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  18
  19 #define CONFIG_BOARD_EARLY_INIT_F
  20 #define CONFIG_BOARD_LATE_INIT
  21
  22 #define CONFIG_MXC_UART
  23
  24 /* MMC Configs */
  25 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  26
  27 #define CONFIG_CMD_PING
  28 #define CONFIG_CMD_DHCP
  29 #define CONFIG_CMD_MII
  30 #define CONFIG_FEC_MXC
  31 #define CONFIG_MII
  32 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  33 #define CONFIG_FEC_XCV_TYPE             RGMII
  34 #define CONFIG_ETHPRIME                 "FEC"
  35 #define CONFIG_FEC_MXC_PHYADDR          1
  36
  37 #define CONFIG_PHYLIB
  38 #define CONFIG_PHY_ATHEROS
  39
  40 #define CONFIG_CMD_SF
  41 #ifdef CONFIG_CMD_SF
  42 #define CONFIG_SPI_FLASH_STMICRO
  43 #define CONFIG_MXC_SPI
  44 #define CONFIG_SF_DEFAULT_BUS           0
  45 #define CONFIG_SF_DEFAULT_CS            0
  46 #define CONFIG_SF_DEFAULT_SPEED         20000000
  47 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
  48 #endif
  49
  50 /* Command definition */
  51 #define CONFIG_CMD_BMODE
  52
  53 #ifdef CONFIG_SUPPORT_EMMC_BOOT
  54 #define EMMC_ENV \
  55         "emmcdev=2\0" \
  56         "update_emmc_firmware=" \
  57                 "if test ${ip_dyn} = yes; then " \
  58                         "setenv get_cmd dhcp; " \
  59                 "else " \
  60                         "setenv get_cmd tftp; " \
  61                 "fi; " \
  62                 "if ${get_cmd} ${update_sd_firmware_filename}; then " \
  63                         "if mmc dev ${emmcdev} 1; then "        \
  64                                 "setexpr fw_sz ${filesize} / 0x200; " \
  65                                 "setexpr fw_sz ${fw_sz} + 1; "  \
  66                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
  67                         "fi; "  \
  68                 "fi\0"
  69 #else
  70 #define EMMC_ENV ""
  71 #endif
  72
  73 #define CONFIG_EXTRA_ENV_SETTINGS \
  74         "script=boot.scr\0" \
  75         "image=zImage\0" \
  76         "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
  77         "fdt_addr=0x18000000\0" \
  78         "boot_fdt=try\0" \
  79         "ip_dyn=yes\0" \
  80         "console=" CONFIG_CONSOLE_DEV "\0" \
  81         "fdt_high=0xffffffff\0"   \
  82         "initrd_high=0xffffffff\0" \
  83         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
  84         "mmcpart=1\0" \
  85         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
  86         "update_sd_firmware=" \
  87                 "if test ${ip_dyn} = yes; then " \
  88                         "setenv get_cmd dhcp; " \
  89                 "else " \
  90                         "setenv get_cmd tftp; " \
  91                 "fi; " \
  92                 "if mmc dev ${mmcdev}; then "   \
  93                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
  94                                 "setexpr fw_sz ${filesize} / 0x200; " \
  95                                 "setexpr fw_sz ${fw_sz} + 1; "  \
  96                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
  97                         "fi; "  \
  98                 "fi\0" \
  99         EMMC_ENV          \
 100         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 101                 "root=${mmcroot}\0" \
 102         "loadbootscript=" \
 103                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 104         "bootscript=echo Running bootscript from mmc ...; " \
 105                 "source\0" \
 106         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 107         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 108         "mmcboot=echo Booting from mmc ...; " \
 109                 "run mmcargs; " \
 110                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 111                         "if run loadfdt; then " \
 112                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 113                         "else " \
 114                                 "if test ${boot_fdt} = try; then " \
 115                                         "bootz; " \
 116                                 "else " \
 117                                         "echo WARN: Cannot load the DT; " \
 118                                 "fi; " \
 119                         "fi; " \
 120                 "else " \
 121                         "bootz; " \
 122                 "fi;\0" \
 123         "netargs=setenv bootargs console=${console},${baudrate} " \
 124                 "root=/dev/nfs " \
 125                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 126         "netboot=echo Booting from net ...; " \
 127                 "run netargs; " \
 128                 "if test ${ip_dyn} = yes; then " \
 129                         "setenv get_cmd dhcp; " \
 130                 "else " \
 131                         "setenv get_cmd tftp; " \
 132                 "fi; " \
 133                 "${get_cmd} ${image}; " \
 134                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 135                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 136                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 137                         "else " \
 138                                 "if test ${boot_fdt} = try; then " \
 139                                         "bootz; " \
 140                                 "else " \
 141                                         "echo WARN: Cannot load the DT; " \
 142                                 "fi; " \
 143                         "fi; " \
 144                 "else " \
 145                         "bootz; " \
 146                 "fi;\0"
 147
 148 #define CONFIG_BOOTCOMMAND \
 149         "mmc dev ${mmcdev};" \
 150         "if mmc rescan; then " \
 151                 "if run loadbootscript; then " \
 152                 "run bootscript; " \
 153                 "else " \
 154                         "if run loadimage; then " \
 155                                 "run mmcboot; " \
 156                         "else run netboot; " \
 157                         "fi; " \
 158                 "fi; " \
 159         "else run netboot; fi"
 160
 161 #define CONFIG_ARP_TIMEOUT     200UL
 162
 163 #define CONFIG_SYS_MEMTEST_START       0x10000000
 164 #define CONFIG_SYS_MEMTEST_END         0x10010000
 165 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 166
 167 #define CONFIG_STACKSIZE               (128 * 1024)
 168
 169 /* Physical Memory Map */
 170 #define CONFIG_NR_DRAM_BANKS           1
 171 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 172
 173 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 174 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 175 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 176
 177 #define CONFIG_SYS_INIT_SP_OFFSET \
 178         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 179 #define CONFIG_SYS_INIT_SP_ADDR \
 180         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 181
 182 /* Environment organization */
 183 #define CONFIG_ENV_SIZE                 (8 * 1024)
 184
 185 #define CONFIG_ENV_IS_IN_MMC
 186
 187 #if defined(CONFIG_ENV_IS_IN_MMC)
 188 #define CONFIG_ENV_OFFSET               (8 * 64 * 1024)
 189 #endif
 190
 191 /* Framebuffer */
 192 #define CONFIG_VIDEO
 193 #define CONFIG_VIDEO_IPUV3
 194 #define CONFIG_CFB_CONSOLE
 195 #define CONFIG_VGA_AS_SINGLE_DEVICE
 196 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 197 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 198 #define CONFIG_VIDEO_BMP_RLE8
 199 #define CONFIG_SPLASH_SCREEN
 200 #define CONFIG_SPLASH_SCREEN_ALIGN
 201 #define CONFIG_BMP_16BPP
 202 #define CONFIG_VIDEO_LOGO
 203 #define CONFIG_VIDEO_BMP_LOGO
 204 #define CONFIG_IPUV3_CLK 260000000
 205 #define CONFIG_IMX_HDMI
 206 #define CONFIG_IMX_VIDEO_SKIP
 207
 208 #ifndef CONFIG_SPL
 209 #define CONFIG_CI_UDC
 210 #define CONFIG_USBD_HS
 211 #define CONFIG_USB_GADGET_DUALSPEED
 212
 213 #define CONFIG_USB_GADGET
 214 #define CONFIG_CMD_USB_MASS_STORAGE
 215 #define CONFIG_USB_GADGET_MASS_STORAGE
 216 #define CONFIG_USBDOWNLOAD_GADGET
 217 #define CONFIG_USB_GADGET_VBUS_DRAW     2
 218
 219 #define CONFIG_G_DNL_VENDOR_NUM         0x0525
 220 #define CONFIG_G_DNL_PRODUCT_NUM        0xa4a5
 221 #define CONFIG_G_DNL_MANUFACTURER       "FSL"
 222 #endif
 223
 224 #endif                         /* __MX6QSABRE_COMMON_CONFIG_H */