1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Copyright (C) 2012 Freescale Semiconductor, Inc.
5 * Configuration settings for the Freescale i.MX6Q SabreSD board.
8 #ifndef __MX6QSABRE_COMMON_CONFIG_H
9 #define __MX6QSABRE_COMMON_CONFIG_H
11 #include "mx6_common.h"
13 #define CONFIG_IMX_THERMAL
15 /* Size of malloc() pool */
16 #define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
18 #define CONFIG_MXC_UART
21 #define CONFIG_SYS_FSL_ESDHC_ADDR 0
23 #define CONFIG_FEC_MXC
24 #define IMX_FEC_BASE ENET_BASE_ADDR
25 #define CONFIG_FEC_XCV_TYPE RGMII
26 #define CONFIG_ETHPRIME "FEC"
27 #define CONFIG_FEC_MXC_PHYADDR 1
29 #define CONFIG_PHY_ATHEROS
31 #ifdef CONFIG_SUPPORT_EMMC_BOOT
34 "update_emmc_firmware=" \
35 "if test ${ip_dyn} = yes; then " \
36 "setenv get_cmd dhcp; " \
38 "setenv get_cmd tftp; " \
40 "if ${get_cmd} ${update_sd_firmware_filename}; then " \
41 "if mmc dev ${emmcdev} 1; then " \
42 "setexpr fw_sz ${filesize} / 0x200; " \
43 "setexpr fw_sz ${fw_sz} + 1; " \
44 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
51 #define CONFIG_EXTRA_ENV_SETTINGS \
54 "fdt_file=undefined\0" \
55 "fdt_addr=0x18000000\0" \
58 "console=" CONSOLE_DEV "\0" \
59 "dfuspi=dfu 0 sf 0:0:10000000:0\0" \
60 "dfu_alt_info_spl=spl raw 0x400\0" \
61 "dfu_alt_info_img=u-boot raw 0x10000\0" \
62 "dfu_alt_info=spl raw 0x400\0" \
63 "fdt_high=0xffffffff\0" \
64 "initrd_high=0xffffffff\0" \
65 "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
67 "finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \
68 "update_sd_firmware=" \
69 "if test ${ip_dyn} = yes; then " \
70 "setenv get_cmd dhcp; " \
72 "setenv get_cmd tftp; " \
74 "if mmc dev ${mmcdev}; then " \
75 "if ${get_cmd} ${update_sd_firmware_filename}; then " \
76 "setexpr fw_sz ${filesize} / 0x200; " \
77 "setexpr fw_sz ${fw_sz} + 1; " \
78 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
82 "mmcargs=setenv bootargs console=${console},${baudrate} " \
83 "root=PARTUUID=${uuid} rootwait rw\0" \
85 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
86 "bootscript=echo Running bootscript from mmc ...; " \
88 "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
89 "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
90 "mmcboot=echo Booting from mmc ...; " \
93 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
94 "if run loadfdt; then " \
95 "bootz ${loadaddr} - ${fdt_addr}; " \
97 "if test ${boot_fdt} = try; then " \
100 "echo WARN: Cannot load the DT; " \
106 "netargs=setenv bootargs console=${console},${baudrate} " \
108 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
109 "netboot=echo Booting from net ...; " \
111 "if test ${ip_dyn} = yes; then " \
112 "setenv get_cmd dhcp; " \
114 "setenv get_cmd tftp; " \
116 "${get_cmd} ${image}; " \
117 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
118 "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
119 "bootz ${loadaddr} - ${fdt_addr}; " \
121 "if test ${boot_fdt} = try; then " \
124 "echo WARN: Cannot load the DT; " \
131 "if test $fdt_file = undefined; then " \
132 "if test $board_name = SABREAUTO && test $board_rev = MX6QP; then " \
133 "setenv fdt_file imx6qp-sabreauto.dtb; fi; " \
134 "if test $board_name = SABREAUTO && test $board_rev = MX6Q; then " \
135 "setenv fdt_file imx6q-sabreauto.dtb; fi; " \
136 "if test $board_name = SABREAUTO && test $board_rev = MX6DL; then " \
137 "setenv fdt_file imx6dl-sabreauto.dtb; fi; " \
138 "if test $board_name = SABRESD && test $board_rev = MX6QP; then " \
139 "setenv fdt_file imx6qp-sabresd.dtb; fi; " \
140 "if test $board_name = SABRESD && test $board_rev = MX6Q; then " \
141 "setenv fdt_file imx6q-sabresd.dtb; fi; " \
142 "if test $board_name = SABRESD && test $board_rev = MX6DL; then " \
143 "setenv fdt_file imx6dl-sabresd.dtb; fi; " \
144 "if test $fdt_file = undefined; then " \
145 "echo WARNING: Could not determine dtb to use; fi; " \
148 #define CONFIG_BOOTCOMMAND \
150 "mmc dev ${mmcdev};" \
151 "if mmc rescan; then " \
152 "if run loadbootscript; then " \
155 "if run loadimage; then " \
157 "else run netboot; " \
160 "else run netboot; fi"
162 #define CONFIG_ARP_TIMEOUT 200UL
164 #define CONFIG_SYS_MEMTEST_START 0x10000000
165 #define CONFIG_SYS_MEMTEST_END 0x10010000
166 #define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
168 /* Physical Memory Map */
169 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
171 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
172 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
173 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
175 #define CONFIG_SYS_INIT_SP_OFFSET \
176 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
177 #define CONFIG_SYS_INIT_SP_ADDR \
178 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
180 /* Environment organization */
181 #define CONFIG_ENV_SIZE (8 * 1024)
183 #if defined(CONFIG_ENV_IS_IN_MMC)
184 #define CONFIG_ENV_OFFSET (768 * 1024)
188 #define CONFIG_VIDEO_BMP_RLE8
189 #define CONFIG_SPLASH_SCREEN
190 #define CONFIG_SPLASH_SCREEN_ALIGN
191 #define CONFIG_BMP_16BPP
192 #define CONFIG_VIDEO_LOGO
193 #define CONFIG_VIDEO_BMP_LOGO
194 #define CONFIG_IMX_HDMI
195 #define CONFIG_IMX_VIDEO_SKIP
197 #define CONFIG_USBD_HS
199 #endif /* __MX6QSABRE_COMMON_CONFIG_H */