include/configs/mx6sabre_common.h

   1 /*
   2  * Copyright (C) 2012 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Freescale i.MX6Q SabreSD board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __MX6QSABRE_COMMON_CONFIG_H
  10 #define __MX6QSABRE_COMMON_CONFIG_H
  11
  12 #include "mx6_common.h"
  13
  14 #define CONFIG_IMX_THERMAL
  15
  16 /* Size of malloc() pool */
  17 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  18
  19 #define CONFIG_MXC_UART
  20
  21 /* MMC Configs */
  22 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  23
  24 #define CONFIG_FEC_MXC
  25 #define CONFIG_MII
  26 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  27 #define CONFIG_FEC_XCV_TYPE             RGMII
  28 #define CONFIG_ETHPRIME                 "FEC"
  29 #define CONFIG_FEC_MXC_PHYADDR          1
  30
  31 #define CONFIG_PHY_ATHEROS
  32
  33 #ifdef CONFIG_CMD_SF
  34 #define CONFIG_MXC_SPI
  35 #define CONFIG_SF_DEFAULT_BUS           0
  36 #define CONFIG_SF_DEFAULT_CS            0
  37 #define CONFIG_SF_DEFAULT_SPEED         20000000
  38 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
  39 #endif
  40
  41 #ifdef CONFIG_SUPPORT_EMMC_BOOT
  42 #define EMMC_ENV \
  43         "emmcdev=2\0" \
  44         "update_emmc_firmware=" \
  45                 "if test ${ip_dyn} = yes; then " \
  46                         "setenv get_cmd dhcp; " \
  47                 "else " \
  48                         "setenv get_cmd tftp; " \
  49                 "fi; " \
  50                 "if ${get_cmd} ${update_sd_firmware_filename}; then " \
  51                         "if mmc dev ${emmcdev} 1; then "        \
  52                                 "setexpr fw_sz ${filesize} / 0x200; " \
  53                                 "setexpr fw_sz ${fw_sz} + 1; "  \
  54                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
  55                         "fi; "  \
  56                 "fi\0"
  57 #else
  58 #define EMMC_ENV ""
  59 #endif
  60
  61 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  62
  63 #define CONFIG_EXTRA_ENV_SETTINGS \
  64         "script=boot.scr\0" \
  65         "image=zImage\0" \
  66         "fdt_file=undefined\0" \
  67         "fdt_addr=0x18000000\0" \
  68         "boot_fdt=try\0" \
  69         "ip_dyn=yes\0" \
  70         "console=" CONSOLE_DEV "\0" \
  71         "dfuspi=dfu 0 sf 0:0:10000000:0\0" \
  72         "dfu_alt_info_spl=spl raw 0x400\0" \
  73         "dfu_alt_info_img=u-boot raw 0x10000\0" \
  74         "dfu_alt_info=spl raw 0x400\0" \
  75         "fdt_high=0xffffffff\0"   \
  76         "initrd_high=0xffffffff\0" \
  77         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
  78         "mmcpart=1\0" \
  79         "finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \
  80         "update_sd_firmware=" \
  81                 "if test ${ip_dyn} = yes; then " \
  82                         "setenv get_cmd dhcp; " \
  83                 "else " \
  84                         "setenv get_cmd tftp; " \
  85                 "fi; " \
  86                 "if mmc dev ${mmcdev}; then "   \
  87                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
  88                                 "setexpr fw_sz ${filesize} / 0x200; " \
  89                                 "setexpr fw_sz ${fw_sz} + 1; "  \
  90                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
  91                         "fi; "  \
  92                 "fi\0" \
  93         EMMC_ENV          \
  94         "mmcargs=setenv bootargs console=${console},${baudrate} " \
  95                 "root=PARTUUID=${uuid} rootwait rw\0" \
  96         "loadbootscript=" \
  97                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
  98         "bootscript=echo Running bootscript from mmc ...; " \
  99                 "source\0" \
 100         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 101         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 102         "mmcboot=echo Booting from mmc ...; " \
 103                 "run finduuid; " \
 104                 "run mmcargs; " \
 105                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 106                         "if run loadfdt; then " \
 107                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 108                         "else " \
 109                                 "if test ${boot_fdt} = try; then " \
 110                                         "bootz; " \
 111                                 "else " \
 112                                         "echo WARN: Cannot load the DT; " \
 113                                 "fi; " \
 114                         "fi; " \
 115                 "else " \
 116                         "bootz; " \
 117                 "fi;\0" \
 118         "netargs=setenv bootargs console=${console},${baudrate} " \
 119                 "root=/dev/nfs " \
 120                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 121         "netboot=echo Booting from net ...; " \
 122                 "run netargs; " \
 123                 "if test ${ip_dyn} = yes; then " \
 124                         "setenv get_cmd dhcp; " \
 125                 "else " \
 126                         "setenv get_cmd tftp; " \
 127                 "fi; " \
 128                 "${get_cmd} ${image}; " \
 129                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 130                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 131                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 132                         "else " \
 133                                 "if test ${boot_fdt} = try; then " \
 134                                         "bootz; " \
 135                                 "else " \
 136                                         "echo WARN: Cannot load the DT; " \
 137                                 "fi; " \
 138                         "fi; " \
 139                 "else " \
 140                         "bootz; " \
 141                 "fi;\0" \
 142                 "findfdt="\
 143                         "if test $fdt_file = undefined; then " \
 144                                 "if test $board_name = SABREAUTO && test $board_rev = MX6QP; then " \
 145                                         "setenv fdt_file imx6qp-sabreauto.dtb; fi; " \
 146                                 "if test $board_name = SABREAUTO && test $board_rev = MX6Q; then " \
 147                                         "setenv fdt_file imx6q-sabreauto.dtb; fi; " \
 148                                 "if test $board_name = SABREAUTO && test $board_rev = MX6DL; then " \
 149                                         "setenv fdt_file imx6dl-sabreauto.dtb; fi; " \
 150                                 "if test $board_name = SABRESD && test $board_rev = MX6QP; then " \
 151                                         "setenv fdt_file imx6qp-sabresd.dtb; fi; " \
 152                                 "if test $board_name = SABRESD && test $board_rev = MX6Q; then " \
 153                                         "setenv fdt_file imx6q-sabresd.dtb; fi; " \
 154                                 "if test $board_name = SABRESD && test $board_rev = MX6DL; then " \
 155                                         "setenv fdt_file imx6dl-sabresd.dtb; fi; " \
 156                                 "if test $fdt_file = undefined; then " \
 157                                         "echo WARNING: Could not determine dtb to use; fi; " \
 158                         "fi;\0" \
 159
 160 #define CONFIG_BOOTCOMMAND \
 161         "run findfdt;" \
 162         "mmc dev ${mmcdev};" \
 163         "if mmc rescan; then " \
 164                 "if run loadbootscript; then " \
 165                 "run bootscript; " \
 166                 "else " \
 167                         "if run loadimage; then " \
 168                                 "run mmcboot; " \
 169                         "else run netboot; " \
 170                         "fi; " \
 171                 "fi; " \
 172         "else run netboot; fi"
 173
 174 #define CONFIG_ARP_TIMEOUT     200UL
 175
 176 #define CONFIG_SYS_MEMTEST_START       0x10000000
 177 #define CONFIG_SYS_MEMTEST_END         0x10010000
 178 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 179
 180 /* Physical Memory Map */
 181 #define CONFIG_NR_DRAM_BANKS           1
 182 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 183
 184 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 185 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 186 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 187
 188 #define CONFIG_SYS_INIT_SP_OFFSET \
 189         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 190 #define CONFIG_SYS_INIT_SP_ADDR \
 191         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 192
 193 /* Environment organization */
 194 #define CONFIG_ENV_SIZE                 (8 * 1024)
 195
 196 #if defined(CONFIG_ENV_IS_IN_MMC)
 197 #define CONFIG_ENV_OFFSET               (768 * 1024)
 198 #endif
 199
 200 /* Framebuffer */
 201 #define CONFIG_VIDEO_IPUV3
 202 #define CONFIG_VIDEO_BMP_RLE8
 203 #define CONFIG_SPLASH_SCREEN
 204 #define CONFIG_SPLASH_SCREEN_ALIGN
 205 #define CONFIG_BMP_16BPP
 206 #define CONFIG_VIDEO_LOGO
 207 #define CONFIG_VIDEO_BMP_LOGO
 208 #ifdef CONFIG_MX6DL
 209 #define CONFIG_IPUV3_CLK 198000000
 210 #else
 211 #define CONFIG_IPUV3_CLK 264000000
 212 #endif
 213 #define CONFIG_IMX_HDMI
 214 #define CONFIG_IMX_VIDEO_SKIP
 215
 216 #ifndef CONFIG_SPL
 217 #define CONFIG_USBD_HS
 218
 219 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 220
 221 #define CONFIG_USB_FUNCTION_FASTBOOT
 222 #define CONFIG_CMD_FASTBOOT
 223 #define CONFIG_ANDROID_BOOT_IMAGE
 224 #define CONFIG_FASTBOOT_BUF_ADDR   CONFIG_SYS_LOAD_ADDR
 225 #define CONFIG_FASTBOOT_BUF_SIZE   0x07000000
 226 #endif
 227
 228 #endif                         /* __MX6QSABRE_COMMON_CONFIG_H */