include/configs/mx6sabre_common.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2012 Freescale Semiconductor, Inc.
   4  *
   5  * Configuration settings for the Freescale i.MX6Q SabreSD board.
   6  */
   7
   8 #ifndef __MX6QSABRE_COMMON_CONFIG_H
   9 #define __MX6QSABRE_COMMON_CONFIG_H
  10
  11 #include "mx6_common.h"
  12
  13 #define CONFIG_IMX_THERMAL
  14
  15 /* Size of malloc() pool */
  16 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  17
  18 #define CONFIG_MXC_UART
  19
  20 /* MMC Configs */
  21 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  22
  23 #define CONFIG_FEC_MXC
  24 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  25 #define CONFIG_FEC_XCV_TYPE             RGMII
  26 #define CONFIG_ETHPRIME                 "FEC"
  27 #define CONFIG_FEC_MXC_PHYADDR          1
  28
  29 #define CONFIG_PHY_ATHEROS
  30
  31 #ifdef CONFIG_SUPPORT_EMMC_BOOT
  32 #define EMMC_ENV \
  33         "emmcdev=2\0" \
  34         "update_emmc_firmware=" \
  35                 "if test ${ip_dyn} = yes; then " \
  36                         "setenv get_cmd dhcp; " \
  37                 "else " \
  38                         "setenv get_cmd tftp; " \
  39                 "fi; " \
  40                 "if ${get_cmd} ${update_sd_firmware_filename}; then " \
  41                         "if mmc dev ${emmcdev} 1; then "        \
  42                                 "setexpr fw_sz ${filesize} / 0x200; " \
  43                                 "setexpr fw_sz ${fw_sz} + 1; "  \
  44                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
  45                         "fi; "  \
  46                 "fi\0"
  47 #else
  48 #define EMMC_ENV ""
  49 #endif
  50
  51 #define CONFIG_EXTRA_ENV_SETTINGS \
  52         "script=boot.scr\0" \
  53         "image=zImage\0" \
  54         "fdtfile=undefined\0" \
  55         "fdt_addr=0x18000000\0" \
  56         "boot_fdt=try\0" \
  57         "ip_dyn=yes\0" \
  58         "console=" CONSOLE_DEV "\0" \
  59         "dfuspi=dfu 0 sf 0:0:10000000:0\0" \
  60         "dfu_alt_info_spl=spl raw 0x400\0" \
  61         "dfu_alt_info_img=u-boot raw 0x10000\0" \
  62         "dfu_alt_info=spl raw 0x400\0" \
  63         "fdt_high=0xffffffff\0"   \
  64         "initrd_high=0xffffffff\0" \
  65         "splashimage=" __stringify(CONFIG_LOADADDR) "\0" \
  66         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
  67         "mmcpart=1\0" \
  68         "finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \
  69         "update_sd_firmware=" \
  70                 "if test ${ip_dyn} = yes; then " \
  71                         "setenv get_cmd dhcp; " \
  72                 "else " \
  73                         "setenv get_cmd tftp; " \
  74                 "fi; " \
  75                 "if mmc dev ${mmcdev}; then "   \
  76                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
  77                                 "setexpr fw_sz ${filesize} / 0x200; " \
  78                                 "setexpr fw_sz ${fw_sz} + 1; "  \
  79                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
  80                         "fi; "  \
  81                 "fi\0" \
  82         EMMC_ENV          \
  83         "mmcargs=setenv bootargs console=${console},${baudrate} " \
  84                 "root=PARTUUID=${uuid} rootwait rw\0" \
  85         "loadbootscript=" \
  86                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
  87         "bootscript=echo Running bootscript from mmc ...; " \
  88                 "source\0" \
  89         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
  90         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdtfile}\0" \
  91         "mmcboot=echo Booting from mmc ...; " \
  92                 "run finduuid; " \
  93                 "run mmcargs; " \
  94                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
  95                         "if run loadfdt; then " \
  96                                 "bootz ${loadaddr} - ${fdt_addr}; " \
  97                         "else " \
  98                                 "if test ${boot_fdt} = try; then " \
  99                                         "bootz; " \
 100                                 "else " \
 101                                         "echo WARN: Cannot load the DT; " \
 102                                 "fi; " \
 103                         "fi; " \
 104                 "else " \
 105                         "bootz; " \
 106                 "fi;\0" \
 107         "netargs=setenv bootargs console=${console},${baudrate} " \
 108                 "root=/dev/nfs " \
 109                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 110         "netboot=echo Booting from net ...; " \
 111                 "run netargs; " \
 112                 "if test ${ip_dyn} = yes; then " \
 113                         "setenv get_cmd dhcp; " \
 114                 "else " \
 115                         "setenv get_cmd tftp; " \
 116                 "fi; " \
 117                 "${get_cmd} ${image}; " \
 118                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 119                         "if ${get_cmd} ${fdt_addr} ${fdtfile}; then " \
 120                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 121                         "else " \
 122                                 "if test ${boot_fdt} = try; then " \
 123                                         "bootz; " \
 124                                 "else " \
 125                                         "echo WARN: Cannot load the DT; " \
 126                                 "fi; " \
 127                         "fi; " \
 128                 "else " \
 129                         "bootz; " \
 130                 "fi;\0" \
 131                 "findfdt="\
 132                         "if test $fdtfile = undefined; then " \
 133                                 "if test $board_name = SABREAUTO && test $board_rev = MX6QP; then " \
 134                                         "setenv fdtfile imx6qp-sabreauto.dtb; fi; " \
 135                                 "if test $board_name = SABREAUTO && test $board_rev = MX6Q; then " \
 136                                         "setenv fdtfile imx6q-sabreauto.dtb; fi; " \
 137                                 "if test $board_name = SABREAUTO && test $board_rev = MX6DL; then " \
 138                                         "setenv fdtfile imx6dl-sabreauto.dtb; fi; " \
 139                                 "if test $board_name = SABRESD && test $board_rev = MX6QP; then " \
 140                                         "setenv fdtfile imx6qp-sabresd.dtb; fi; " \
 141                                 "if test $board_name = SABRESD && test $board_rev = MX6Q; then " \
 142                                         "setenv fdtfile imx6q-sabresd.dtb; fi; " \
 143                                 "if test $board_name = SABRESD && test $board_rev = MX6DL; then " \
 144                                         "setenv fdtfile imx6dl-sabresd.dtb; fi; " \
 145                                 "if test $fdtfile = undefined; then " \
 146                                         "echo WARNING: Could not determine dtb to use; fi; " \
 147                         "fi;\0" \
 148
 149 #define CONFIG_BOOTCOMMAND \
 150         "run findfdt;" \
 151         "mmc dev ${mmcdev};" \
 152         "if mmc rescan; then " \
 153                 "if run loadbootscript; then " \
 154                 "run bootscript; " \
 155                 "else " \
 156                         "if run loadimage; then " \
 157                                 "run mmcboot; " \
 158                         "else run netboot; " \
 159                         "fi; " \
 160                 "fi; " \
 161         "else run netboot; fi"
 162
 163 #define CONFIG_ARP_TIMEOUT     200UL
 164
 165 #define CONFIG_SYS_MEMTEST_START       0x10000000
 166 #define CONFIG_SYS_MEMTEST_END         0x10010000
 167 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 168
 169 /* Physical Memory Map */
 170 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 171
 172 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 173 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 174 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 175
 176 #define CONFIG_SYS_INIT_SP_OFFSET \
 177         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 178 #define CONFIG_SYS_INIT_SP_ADDR \
 179         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 180
 181 /* Environment organization */
 182 #define CONFIG_ENV_SIZE                 (8 * 1024)
 183
 184 #if defined(CONFIG_ENV_IS_IN_MMC)
 185 #define CONFIG_ENV_OFFSET               (768 * 1024)
 186 #endif
 187
 188 /* Framebuffer */
 189 #define CONFIG_VIDEO_BMP_RLE8
 190 #define CONFIG_SPLASH_SCREEN
 191 #define CONFIG_SPLASH_SCREEN_ALIGN
 192 #define CONFIG_BMP_16BPP
 193 #define CONFIG_VIDEO_LOGO
 194 #define CONFIG_VIDEO_BMP_LOGO
 195 #define CONFIG_IMX_HDMI
 196 #define CONFIG_IMX_VIDEO_SKIP
 197
 198 #define CONFIG_USBD_HS
 199
 200 #endif                         /* __MX6QSABRE_COMMON_CONFIG_H */