include/configs/mx6qarm2.h

   1 /*
   2  * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Freescale i.MX6Q Armadillo2 board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #define CONFIG_MX6
  13
  14 #include "mx6_common.h"
  15
  16 #define CONFIG_DISPLAY_CPUINFO
  17 #define CONFIG_DISPLAY_BOARDINFO
  18
  19 #define CONFIG_CMDLINE_TAG
  20 #define CONFIG_SETUP_MEMORY_TAGS
  21 #define CONFIG_INITRD_TAG
  22
  23 #define CONFIG_SYS_GENERIC_BOARD
  24
  25 /* Size of malloc() pool */
  26 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
  27
  28 #define CONFIG_BOARD_EARLY_INIT_F
  29 #define CONFIG_MXC_GPIO
  30
  31 #define CONFIG_MXC_UART
  32 #define CONFIG_MXC_UART_BASE            UART4_BASE
  33
  34 /* MMC Configs */
  35 #define CONFIG_FSL_ESDHC
  36 #define CONFIG_FSL_USDHC
  37 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC4_BASE_ADDR
  38 #define CONFIG_SYS_FSL_USDHC_NUM        2
  39
  40 #define CONFIG_MMC
  41 #define CONFIG_CMD_MMC
  42 #define CONFIG_GENERIC_MMC
  43 #define CONFIG_BOUNCE_BUFFER
  44 #define CONFIG_CMD_FAT
  45 #define CONFIG_DOS_PARTITION
  46
  47 #define CONFIG_CMD_PING
  48 #define CONFIG_CMD_DHCP
  49 #define CONFIG_CMD_MII
  50 #define CONFIG_CMD_NET
  51 #define CONFIG_FEC_MXC
  52 #define CONFIG_MII
  53 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  54 #define CONFIG_FEC_XCV_TYPE             RGMII
  55 #define CONFIG_FEC_MXC_PHYADDR          0
  56
  57 /* allow to overwrite serial and ethaddr */
  58 #define CONFIG_ENV_OVERWRITE
  59 #define CONFIG_CONS_INDEX               1
  60 #define CONFIG_BAUDRATE                 115200
  61
  62 /* Command definition */
  63
  64 #define CONFIG_BOOTDELAY                3
  65
  66 #define CONFIG_LOADADDR                 0x12000000
  67 #define CONFIG_SYS_TEXT_BASE            0x17800000
  68
  69 #define CONFIG_EXTRA_ENV_SETTINGS \
  70         "script=boot.scr\0" \
  71         "image=zImage\0" \
  72         "console=ttymxc3\0" \
  73         "fdt_file=imx6q-arm2.dtb\0" \
  74         "fdt_addr=0x18000000\0" \
  75         "fdt_high=0xffffffff\0" \
  76         "initrd_high=0xffffffff\0" \
  77         "boot_fdt=try\0" \
  78         "ip_dyn=yes\0" \
  79         "mmcdev=1\0" \
  80         "mmcpart=1\0" \
  81         "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
  82         "mmcargs=setenv bootargs console=${console},${baudrate} " \
  83                 "root=${mmcroot}\0" \
  84         "loadbootscript=" \
  85                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
  86         "bootscript=echo Running bootscript from mmc ...; " \
  87                 "source\0" \
  88         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
  89         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
  90         "mmcboot=echo Booting from mmc ...; " \
  91                 "run mmcargs; " \
  92                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
  93                         "if run loadfdt; then " \
  94                                 "bootz ${loadaddr} - ${fdt_addr}; " \
  95                         "else " \
  96                                 "if test ${boot_fdt} = try; then " \
  97                                         "bootz; " \
  98                                 "else " \
  99                                         "echo WARN: Cannot load the DT; " \
 100                                 "fi; " \
 101                         "fi; " \
 102                 "else " \
 103                         "bootz; " \
 104                 "fi;\0" \
 105         "netargs=setenv bootargs console=${console},${baudrate} " \
 106                 "root=/dev/nfs " \
 107                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 108         "netboot=echo Booting from net ...; " \
 109                 "run netargs; " \
 110                 "if test ${ip_dyn} = yes; then " \
 111                         "setenv get_cmd dhcp; " \
 112                 "else " \
 113                         "setenv get_cmd tftp; " \
 114                 "fi; " \
 115                 "${get_cmd} ${image}; " \
 116                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 117                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 118                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 119                         "else " \
 120                                 "if test ${boot_fdt} = try; then " \
 121                                         "bootz; " \
 122                                 "else " \
 123                                         "echo WARN: Cannot load the DT; " \
 124                                 "fi; " \
 125                         "fi; " \
 126                 "else " \
 127                         "bootz; " \
 128                 "fi;\0"
 129
 130 #define CONFIG_BOOTCOMMAND \
 131         "mmc dev ${mmcdev};" \
 132         "mmc dev ${mmcdev}; if mmc rescan; then " \
 133                 "if run loadbootscript; then " \
 134                         "run bootscript; " \
 135                 "else " \
 136                         "if run loadimage; then " \
 137                                 "run mmcboot; " \
 138                         "else run netboot; " \
 139                         "fi; " \
 140                 "fi; " \
 141         "else run netboot; fi"
 142
 143 #define CONFIG_ARP_TIMEOUT      200UL
 144
 145 /* Miscellaneous configurable options */
 146 #define CONFIG_SYS_LONGHELP
 147 #define CONFIG_SYS_HUSH_PARSER
 148 #define CONFIG_AUTO_COMPLETE
 149 #define CONFIG_SYS_CBSIZE               256
 150
 151 #define CONFIG_SYS_MAXARGS              16
 152 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 153
 154 #define CONFIG_SYS_MEMTEST_START        0x10000000
 155 #define CONFIG_SYS_MEMTEST_END          0x10010000
 156
 157 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 158
 159 #define CONFIG_CMDLINE_EDITING
 160
 161 /* Physical Memory Map */
 162 #define CONFIG_NR_DRAM_BANKS            1
 163 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 164
 165 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 166 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 167 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 168
 169 #define CONFIG_SYS_INIT_SP_OFFSET \
 170         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 171 #define CONFIG_SYS_INIT_SP_ADDR \
 172         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 173
 174 /* Environment organization */
 175 #define CONFIG_ENV_OFFSET               (6 * 64 * 1024)
 176 #define CONFIG_ENV_SIZE                 (8 * 1024)
 177 #define CONFIG_ENV_IS_IN_MMC
 178 #define CONFIG_SYS_MMC_ENV_DEV          1
 179
 180 #define CONFIG_OF_LIBFDT
 181 #define CONFIG_CMD_BOOTZ
 182
 183 /* USB Configs */
 184 #define CONFIG_CMD_USB
 185 #ifdef CONFIG_CMD_USB
 186 #define CONFIG_USB_EHCI
 187 #define CONFIG_USB_EHCI_MX6
 188 #define CONFIG_USB_STORAGE
 189 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 190 #define CONFIG_USB_HOST_ETHER
 191 #define CONFIG_USB_ETHER_ASIX
 192 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
 193 #define CONFIG_MXC_USB_FLAGS            0
 194 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1
 195 #endif
 196
 197 #endif                          /* __CONFIG_H */