include/configs/mx6cuboxi.h

   1 /*
   2  * Copyright (C) 2015 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the SolidRun mx6 based boards
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8 #ifndef __MX6CUBOXI_CONFIG_H
   9 #define __MX6CUBOXI_CONFIG_H
  10
  11 #include <linux/sizes.h>
  12 #include <asm/arch/imx-regs.h>
  13 #include <asm/imx-common/gpio.h>
  14 #include "mx6_common.h"
  15
  16 #define CONFIG_MX6
  17 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  18 #define CONFIG_SPL_MMC_SUPPORT
  19 #include "imx6_spl.h"
  20
  21 #define CONFIG_DISPLAY_CPUINFO
  22 #define CONFIG_DISPLAY_BOARDINFO
  23 #define CONFIG_CMDLINE_TAG
  24 #define CONFIG_SETUP_MEMORY_TAGS
  25 #define CONFIG_INITRD_TAG
  26 #define CONFIG_REVISION_TAG
  27 #define CONFIG_IMX6_THERMAL
  28 #define CONFIG_SYS_GENERIC_BOARD
  29
  30 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  31 #define CONFIG_BOARD_EARLY_INIT_F
  32 #define CONFIG_BOARD_LATE_INIT
  33 #define CONFIG_MXC_GPIO
  34 #define CONFIG_MXC_UART
  35 #define CONFIG_CMD_FUSE
  36 #define CONFIG_MXC_OCOTP
  37
  38 /* MMC Configs */
  39 #define CONFIG_FSL_ESDHC
  40 #define CONFIG_FSL_USDHC
  41 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC2_BASE_ADDR
  42 #define CONFIG_MMC
  43 #define CONFIG_CMD_MMC
  44 #define CONFIG_GENERIC_MMC
  45 #define CONFIG_BOUNCE_BUFFER
  46 #define CONFIG_CMD_EXT4
  47 #define CONFIG_CMD_EXT4_WRITE
  48 #define CONFIG_CMD_FAT
  49 #define CONFIG_DOS_PARTITION
  50
  51 /* Ethernet Configuration */
  52 #define CONFIG_FEC_MXC
  53 #define CONFIG_CMD_PING
  54 #define CONFIG_CMD_DHCP
  55 #define CONFIG_CMD_MII
  56 #define CONFIG_CMD_NET
  57 #define CONFIG_MII
  58 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  59 #define CONFIG_FEC_XCV_TYPE             RGMII
  60 #define CONFIG_FEC_MXC_PHYADDR          0
  61 #define CONFIG_PHYLIB
  62 #define CONFIG_PHY_ATHEROS
  63
  64 /* allow to overwrite serial and ethaddr */
  65 #define CONFIG_ENV_OVERWRITE
  66 #define CONFIG_CONS_INDEX               1
  67 #define CONFIG_BAUDRATE                 115200
  68
  69 /* Framebuffer */
  70 #define CONFIG_VIDEO
  71 #define CONFIG_VIDEO_IPUV3
  72 #define CONFIG_IPUV3_CLK                260000000
  73 #define CONFIG_CFB_CONSOLE
  74 #define CONFIG_VGA_AS_SINGLE_DEVICE
  75 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
  76 #define CONFIG_VIDEO_BMP_RLE8
  77 #define CONFIG_SPLASH_SCREEN
  78 #define CONFIG_SPLASH_SCREEN_ALIGN
  79 #define CONFIG_BMP_16BPP
  80 #define CONFIG_VIDEO_LOGO
  81 #define CONFIG_VIDEO_BMP_LOGO
  82 #define CONFIG_IMX_HDMI
  83 #define CONFIG_IMX_VIDEO_SKIP
  84
  85 #define CONFIG_SYS_NO_FLASH
  86
  87 /* Command definition */
  88 #include <config_cmd_default.h>
  89
  90 #define CONFIG_CMD_BOOTZ
  91 #define CONFIG_CMD_SETEXPR
  92
  93 #define CONFIG_BOOTDELAY                1
  94
  95 #define CONFIG_LOADADDR                 0x12000000
  96 #define CONFIG_SYS_TEXT_BASE            0x17800000
  97
  98 #define CONFIG_MXC_UART_BASE    UART1_BASE
  99 #define CONFIG_CONSOLE_DEV      "ttymxc0"
 100 #define CONFIG_MMCROOT          "/dev/mmcblk0p2"
 101 #define CONFIG_SYS_FSL_USDHC_NUM        1
 102 #define CONFIG_SYS_MMC_ENV_DEV          0       /* SDHC2 */
 103
 104 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 105 #define CONFIG_EXTRA_ENV_SETTINGS \
 106         "script=boot.scr\0" \
 107         "image=zImage\0" \
 108         "fdtfile=undefined\0" \
 109         "fdt_addr_r=0x18000000\0" \
 110         "boot_fdt=try\0" \
 111         "ip_dyn=yes\0" \
 112         "console=" CONFIG_CONSOLE_DEV "\0" \
 113         "bootm_size=0x10000000\0" \
 114         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
 115         "mmcpart=1\0" \
 116         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
 117         "update_sd_firmware=" \
 118                 "if test ${ip_dyn} = yes; then " \
 119                         "setenv get_cmd dhcp; " \
 120                 "else " \
 121                         "setenv get_cmd tftp; " \
 122                 "fi; " \
 123                 "if mmc dev ${mmcdev}; then "   \
 124                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 125                                 "setexpr fw_sz ${filesize} / 0x200; " \
 126                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 127                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 128                         "fi; "  \
 129                 "fi\0" \
 130         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 131                 "root=${mmcroot}\0" \
 132         "loadbootscript=" \
 133                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 134         "bootscript=echo Running bootscript from mmc ...; " \
 135                 "source\0" \
 136         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 137         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile}\0" \
 138         "mmcboot=echo Booting from mmc ...; " \
 139                 "run mmcargs; " \
 140                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 141                         "if run loadfdt; then " \
 142                                 "bootz ${loadaddr} - ${fdt_addr_r}; " \
 143                         "else " \
 144                                 "if test ${boot_fdt} = try; then " \
 145                                         "bootz; " \
 146                                 "else " \
 147                                         "echo WARN: Cannot load the DT; " \
 148                                 "fi; " \
 149                         "fi; " \
 150                 "else " \
 151                         "bootz; " \
 152                 "fi;\0" \
 153         "netargs=setenv bootargs console=${console},${baudrate} " \
 154                 "root=/dev/nfs " \
 155                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 156         "netboot=echo Booting from net ...; " \
 157                 "run netargs; " \
 158                 "if test ${ip_dyn} = yes; then " \
 159                         "setenv get_cmd dhcp; " \
 160                 "else " \
 161                         "setenv get_cmd tftp; " \
 162                 "fi; " \
 163                 "${get_cmd} ${image}; " \
 164                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 165                         "if ${get_cmd} ${fdt_addr_r} ${fdtfile}; then " \
 166                                 "bootz ${loadaddr} - ${fdt_addr_r}; " \
 167                         "else " \
 168                                 "if test ${boot_fdt} = try; then " \
 169                                         "bootz; " \
 170                                 "else " \
 171                                         "echo WARN: Cannot load the DT; " \
 172                                 "fi; " \
 173                         "fi; " \
 174                 "else " \
 175                         "bootz; " \
 176                 "fi;\0" \
 177         "findfdt="\
 178                 "if test $board_name = HUMMINGBOARD && test $board_rev = MX6Q ; then " \
 179                         "setenv fdtfile imx6q-hummingboard.dtb; fi; " \
 180                 "if test $board_name = HUMMINGBOARD && test $board_rev = MX6DL ; then " \
 181                         "setenv fdtfile imx6dl-hummingboard.dtb; fi; " \
 182                 "if test $board_name = CUBOXI && test $board_rev = MX6Q ; then " \
 183                         "setenv fdtfile imx6q-cubox-i.dtb; fi; " \
 184                 "if test $board_name = CUBOXI && test $board_rev = MX6DL ; then " \
 185                         "setenv fdtfile imx6dl-cubox-i.dtb; fi; " \
 186                 "if test $fdtfile = undefined; then " \
 187                         "echo WARNING: Could not determine dtb to use; fi; \0" \
 188
 189 #define CONFIG_BOOTCOMMAND \
 190         "run findfdt; " \
 191         "mmc dev ${mmcdev};" \
 192         "if mmc rescan; then " \
 193                 "if run loadbootscript; then " \
 194                 "run bootscript; " \
 195                 "else " \
 196                         "if run loadimage; then " \
 197                                 "run mmcboot; " \
 198                         "else run netboot; " \
 199                         "fi; " \
 200                 "fi; " \
 201         "else run netboot; fi"
 202
 203 /* Miscellaneous configurable options */
 204 #define CONFIG_SYS_LONGHELP
 205 #define CONFIG_SYS_HUSH_PARSER
 206 #define CONFIG_AUTO_COMPLETE
 207 #define CONFIG_SYS_CBSIZE              256
 208 #define CONFIG_SYS_MAXARGS             16
 209 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 210
 211 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 212
 213 #define CONFIG_CMDLINE_EDITING
 214
 215 /* Physical Memory Map */
 216 #define CONFIG_NR_DRAM_BANKS           1
 217 #define CONFIG_SYS_SDRAM_BASE          MMDC0_ARB_BASE_ADDR
 218 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 219 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 220
 221 #define CONFIG_SYS_INIT_SP_OFFSET \
 222         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 223 #define CONFIG_SYS_INIT_SP_ADDR \
 224         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 225
 226 /* Environment organization */
 227 #define CONFIG_ENV_SIZE                 (8 * 1024)
 228 #define CONFIG_ENV_IS_IN_MMC
 229 #define CONFIG_ENV_OFFSET               (8 * 64 * 1024)
 230
 231 #define CONFIG_OF_LIBFDT
 232 #define CONFIG_CMD_CACHE
 233
 234 #endif                         /* __MX6CUBOXI_CONFIG_H */