Merge branch 'master' of git://www.denx.de/git/u-boot-arc
[platform/kernel/u-boot.git] / include / configs / mx6cuboxi.h
1 /*
2  * Copyright (C) 2015 Freescale Semiconductor, Inc.
3  *
4  * Configuration settings for the SolidRun mx6 based boards
5  *
6  * SPDX-License-Identifier:     GPL-2.0+
7  */
8 #ifndef __MX6CUBOXI_CONFIG_H
9 #define __MX6CUBOXI_CONFIG_H
10
11 #include <config_distro_defaults.h>
12 #include "mx6_common.h"
13
14 #include "imx6_spl.h"
15
16 #define CONFIG_IMX_THERMAL
17
18 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
19 #define CONFIG_BOARD_EARLY_INIT_F
20 #define CONFIG_BOARD_LATE_INIT
21 #define CONFIG_MXC_UART
22
23 /* MMC Configs */
24 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC2_BASE_ADDR
25
26 /* Ethernet Configuration */
27 #define CONFIG_FEC_MXC
28 #define CONFIG_MII
29 #define IMX_FEC_BASE                    ENET_BASE_ADDR
30 #define CONFIG_FEC_XCV_TYPE             RGMII
31 #define CONFIG_FEC_MXC_PHYADDR          0
32 #define CONFIG_PHYLIB
33 #define CONFIG_PHY_ATHEROS
34
35 /* Framebuffer */
36 #define CONFIG_VIDEO
37 #define CONFIG_VIDEO_IPUV3
38 #define CONFIG_IPUV3_CLK                260000000
39 #define CONFIG_CFB_CONSOLE
40 #define CONFIG_VGA_AS_SINGLE_DEVICE
41 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
42 #define CONFIG_VIDEO_BMP_RLE8
43 #define CONFIG_SPLASH_SCREEN
44 #define CONFIG_SPLASH_SCREEN_ALIGN
45 #define CONFIG_BMP_16BPP
46 #define CONFIG_VIDEO_LOGO
47 #define CONFIG_VIDEO_BMP_LOGO
48 #define CONFIG_IMX_HDMI
49 #define CONFIG_CMD_HDMIDETECT
50 #define CONFIG_IMX_VIDEO_SKIP
51 #define CONFIG_CONSOLE_MUX
52
53 /* USB */
54 #define CONFIG_USB_EHCI
55 #define CONFIG_USB_EHCI_MX6
56 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
57 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
58 #define CONFIG_MXC_USB_FLAGS            0
59 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
60 #define CONFIG_USB_KEYBOARD
61 #define CONFIG_SYS_USB_EVENT_POLL
62 #define CONFIG_PREBOOT \
63         "if hdmidet; then " \
64                 "usb start; "                  \
65                 "setenv stdin  serial,usbkbd; "\
66                 "setenv stdout serial,vga; "   \
67                 "setenv stderr serial,vga; "   \
68         "else " \
69                 "setenv stdin  serial; " \
70                 "setenv stdout serial; " \
71                 "setenv stderr serial; " \
72         "fi;"
73
74 /* Command definition */
75
76 #define CONFIG_MXC_UART_BASE    UART1_BASE
77 #define CONFIG_CONSOLE_DEV      "ttymxc0"
78 #define CONFIG_SYS_FSL_USDHC_NUM        1
79 #define CONFIG_SYS_MMC_ENV_DEV          0       /* SDHC2 */
80
81 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
82 #ifndef CONFIG_SPL_BUILD
83 #define CONFIG_EXTRA_ENV_SETTINGS \
84         "fdtfile=undefined\0" \
85         "fdt_addr_r=0x18000000\0" \
86         "fdt_addr=0x18000000\0" \
87         "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0"  \
88         "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
89         "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
90         "ramdisk_addr_r=0x13000000\0" \
91         "ramdiskaddr=0x13000000\0" \
92         "initrd_high=0xffffffff\0" \
93         "fdt_high=0xffffffff\0" \
94         "ip_dyn=yes\0" \
95         "console=" CONFIG_CONSOLE_DEV "\0" \
96         "bootm_size=0x10000000\0" \
97         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
98         "update_sd_firmware=" \
99                 "if test ${ip_dyn} = yes; then " \
100                         "setenv get_cmd dhcp; " \
101                 "else " \
102                         "setenv get_cmd tftp; " \
103                 "fi; " \
104                 "if mmc dev ${mmcdev}; then "   \
105                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
106                                 "setexpr fw_sz ${filesize} / 0x200; " \
107                                 "setexpr fw_sz ${fw_sz} + 1; "  \
108                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
109                         "fi; "  \
110                 "fi\0" \
111         "findfdt="\
112                 "if test $board_name = HUMMINGBOARD && test $board_rev = MX6Q ; then " \
113                         "setenv fdtfile imx6q-hummingboard.dtb; fi; " \
114                 "if test $board_name = HUMMINGBOARD && test $board_rev = MX6DL ; then " \
115                         "setenv fdtfile imx6dl-hummingboard.dtb; fi; " \
116                 "if test $board_name = CUBOXI && test $board_rev = MX6Q ; then " \
117                         "setenv fdtfile imx6q-cubox-i.dtb; fi; " \
118                 "if test $board_name = CUBOXI && test $board_rev = MX6DL ; then " \
119                         "setenv fdtfile imx6dl-cubox-i.dtb; fi; " \
120                 "if test $fdtfile = undefined; then " \
121                         "echo WARNING: Could not determine dtb to use; fi; \0" \
122         BOOTENV
123
124 #define CONFIG_BOOTCOMMAND \
125         "run findfdt; " \
126         "run distro_bootcmd"
127
128 #define BOOT_TARGET_DEVICES(func) \
129         func(MMC, mmc, 0) \
130         func(USB, usb, 0) \
131         func(PXE, pxe, na) \
132         func(DHCP, dhcp, na)
133
134 #include <config_distro_bootcmd.h>
135
136 #else
137 #define CONFIG_EXTRA_ENV_SETTINGS
138 #endif /* CONFIG_SPL_BUILD */
139
140 /* Physical Memory Map */
141 #define CONFIG_NR_DRAM_BANKS           1
142 #define CONFIG_SYS_SDRAM_BASE          MMDC0_ARB_BASE_ADDR
143 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
144 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
145
146 #define CONFIG_SYS_INIT_SP_OFFSET \
147         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
148 #define CONFIG_SYS_INIT_SP_ADDR \
149         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
150
151 /* Environment organization */
152 #define CONFIG_ENV_SIZE                 (8 * 1024)
153 #define CONFIG_ENV_IS_IN_MMC
154 #define CONFIG_ENV_OFFSET               (8 * 64 * 1024)
155
156 #endif                         /* __MX6CUBOXI_CONFIG_H */