Merge branch 'master' of git://git.denx.de/u-boot-socfpga
[platform/kernel/u-boot.git] / include / configs / mx6cuboxi.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright (C) 2015 Freescale Semiconductor, Inc.
4  *
5  * Configuration settings for the SolidRun mx6 based boards
6  */
7 #ifndef __MX6CUBOXI_CONFIG_H
8 #define __MX6CUBOXI_CONFIG_H
9
10 #include "mx6_common.h"
11
12 #include "imx6_spl.h"
13
14 #define CONFIG_IMX_THERMAL
15
16 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
17 #define CONFIG_MXC_UART
18
19 /* MMC Configs */
20 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC2_BASE_ADDR
21
22 /* SATA Configuration */
23 #ifdef CONFIG_CMD_SATA
24 #define CONFIG_SYS_SATA_MAX_DEVICE      1
25 #define CONFIG_DWC_AHSATA_PORT_ID       0
26 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
27 #define CONFIG_LBA48
28 #endif
29
30 /* Ethernet Configuration */
31 #define CONFIG_FEC_MXC
32 #define IMX_FEC_BASE                    ENET_BASE_ADDR
33 #define CONFIG_FEC_XCV_TYPE             RGMII
34 #define CONFIG_FEC_MXC_PHYADDR          0
35 #define CONFIG_PHY_ATHEROS
36
37 /* Framebuffer */
38 #define CONFIG_VIDEO_BMP_RLE8
39 #define CONFIG_SPLASH_SCREEN
40 #define CONFIG_SPLASH_SCREEN_ALIGN
41 #define CONFIG_BMP_16BPP
42 #define CONFIG_VIDEO_LOGO
43 #define CONFIG_VIDEO_BMP_LOGO
44 #define CONFIG_IMX_HDMI
45 #define CONFIG_IMX_VIDEO_SKIP
46
47 /* USB */
48 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
49 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
50 #define CONFIG_MXC_USB_FLAGS            0
51 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
52
53 /* Command definition */
54
55 #define CONFIG_MXC_UART_BASE    UART1_BASE
56 #define CONSOLE_DEV     "ttymxc0"
57 #define CONFIG_SYS_MMC_ENV_DEV          0       /* SDHC2 */
58
59 #ifndef CONFIG_SPL_BUILD
60 #define CONFIG_EXTRA_ENV_SETTINGS \
61         "som_rev=undefined\0" \
62         "has_emmc=undefined\0" \
63         "fdtfile=undefined\0" \
64         "fdt_addr_r=0x18000000\0" \
65         "fdt_addr=0x18000000\0" \
66         "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0"  \
67         "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
68         "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
69         "ramdisk_addr_r=0x13000000\0" \
70         "ramdiskaddr=0x13000000\0" \
71         "initrd_high=0xffffffff\0" \
72         "fdt_high=0xffffffff\0" \
73         "ip_dyn=yes\0" \
74         "console=" CONSOLE_DEV ",115200\0" \
75         "bootm_size=0x10000000\0" \
76         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
77         "finduuid=part uuid mmc 0:1 uuid\0" \
78         "update_sd_firmware=" \
79                 "if test ${ip_dyn} = yes; then " \
80                         "setenv get_cmd dhcp; " \
81                 "else " \
82                         "setenv get_cmd tftp; " \
83                 "fi; " \
84                 "if mmc dev ${mmcdev}; then "   \
85                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
86                                 "setexpr fw_sz ${filesize} / 0x200; " \
87                                 "setexpr fw_sz ${fw_sz} + 1; "  \
88                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
89                         "fi; "  \
90                 "fi\0" \
91         "findfdt="\
92                 "if test ${board_rev} = MX6Q; then " \
93                         "setenv fdtprefix imx6q; fi; " \
94                 "if test ${board_rev} = MX6DL; then " \
95                         "setenv fdtprefix imx6dl; fi; " \
96                 "if test ${som_rev} = V15; then " \
97                         "setenv fdtsuffix -som-v15; fi; " \
98                 "if test ${has_emmc} = yes; then " \
99                         "setenv emmcsuffix -emmc; fi; " \
100                 "if test ${board_name} = HUMMINGBOARD2 ; then " \
101                         "setenv fdtfile ${fdtprefix}-hummingboard2${emmcsuffix}${fdtsuffix}.dtb; fi; " \
102                 "if test ${board_name} = HUMMINGBOARD ; then " \
103                         "setenv fdtfile ${fdtprefix}-hummingboard${emmcsuffix}${fdtsuffix}.dtb; fi; " \
104                 "if test ${board_name} = CUBOXI ; then " \
105                         "setenv fdtfile ${fdtprefix}-cubox-i${emmcsuffix}${fdtsuffix}.dtb; fi; " \
106                 "if test ${fdtfile} = undefined; then " \
107                         "echo WARNING: Could not determine dtb to use; fi; \0" \
108         BOOTENV
109
110 #define BOOT_TARGET_DEVICES(func) \
111         func(MMC, mmc, 0) \
112         func(SATA, sata, 0) \
113         func(USB, usb, 0) \
114         func(PXE, pxe, na) \
115         func(DHCP, dhcp, na)
116
117 #include <config_distro_bootcmd.h>
118
119 #else
120 #define CONFIG_EXTRA_ENV_SETTINGS
121 #endif /* CONFIG_SPL_BUILD */
122
123 /* Physical Memory Map */
124 #define CONFIG_SYS_SDRAM_BASE          MMDC0_ARB_BASE_ADDR
125 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
126 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
127
128 #define CONFIG_SYS_INIT_SP_OFFSET \
129         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
130 #define CONFIG_SYS_INIT_SP_ADDR \
131         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
132
133 /* Environment organization */
134
135 #endif                         /* __MX6CUBOXI_CONFIG_H */