1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Copyright (C) 2015 Freescale Semiconductor, Inc.
5 * Configuration settings for the SolidRun mx6 based boards
7 #ifndef __MX6CUBOXI_CONFIG_H
8 #define __MX6CUBOXI_CONFIG_H
10 #include <linux/stringify.h>
12 #include "mx6_common.h"
17 #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
20 #define CONFIG_IMX_HDMI
21 #define CONFIG_IMX_VIDEO_SKIP
24 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
26 /* Command definition */
28 #define CONFIG_MXC_UART_BASE UART1_BASE
30 #define CONFIG_EXTRA_ENV_SETTINGS \
31 "som_rev=undefined\0" \
32 "has_emmc=undefined\0" \
33 "fdtfile=undefined\0" \
34 "fdt_addr_r=0x18000000\0" \
35 "fdt_addr=0x18000000\0" \
36 "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
37 "pxefile_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
38 "scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
39 "ramdisk_addr_r=0x13000000\0" \
40 "ramdiskaddr=0x13000000\0" \
41 "initrd_high=0xffffffff\0" \
44 "bootm_size=0x10000000\0" \
45 "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
46 "finduuid=part uuid mmc 1:1 uuid\0" \
47 "update_sd_firmware=" \
48 "if test ${ip_dyn} = yes; then " \
49 "setenv get_cmd dhcp; " \
51 "setenv get_cmd tftp; " \
53 "if mmc dev ${mmcdev}; then " \
54 "if ${get_cmd} ${update_sd_firmware_filename}; then " \
55 "setexpr fw_sz ${filesize} / 0x200; " \
56 "setexpr fw_sz ${fw_sz} + 1; " \
57 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
61 "if test ${board_rev} = MX6Q; then " \
62 "setenv fdtprefix imx6q; fi; " \
63 "if test ${board_rev} = MX6DL; then " \
64 "setenv fdtprefix imx6dl; fi; " \
65 "if test ${som_rev} = V15; then " \
66 "setenv fdtsuffix -som-v15; fi; " \
67 "if test ${has_emmc} = yes; then " \
68 "setenv emmcsuffix -emmc; fi; " \
69 "if test ${board_name} = HUMMINGBOARD2 ; then " \
70 "setenv fdtfile ${fdtprefix}-hummingboard2${emmcsuffix}${fdtsuffix}.dtb; fi; " \
71 "if test ${board_name} = HUMMINGBOARD ; then " \
72 "setenv fdtfile ${fdtprefix}-hummingboard${emmcsuffix}${fdtsuffix}.dtb; fi; " \
73 "if test ${board_name} = CUBOXI ; then " \
74 "setenv fdtfile ${fdtprefix}-cubox-i${emmcsuffix}${fdtsuffix}.dtb; fi; " \
75 "if test ${fdtfile} = undefined; then " \
76 "echo WARNING: Could not determine dtb to use; fi; \0" \
79 #define BOOT_TARGET_DEVICES(func) \
87 #include <config_distro_bootcmd.h>
89 /* Physical Memory Map */
90 #define CONFIG_SYS_SDRAM_BASE MMDC0_ARB_BASE_ADDR
91 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
92 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
94 /* Environment organization */
96 #endif /* __MX6CUBOXI_CONFIG_H */