include/configs/mx6cuboxi.h

   1 /*
   2  * Copyright (C) 2015 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the SolidRun mx6 based boards
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8 #ifndef __MX6CUBOXI_CONFIG_H
   9 #define __MX6CUBOXI_CONFIG_H
  10
  11 #include "mx6_common.h"
  12
  13 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  14 #define CONFIG_SPL_MMC_SUPPORT
  15 #include "imx6_spl.h"
  16
  17 #define CONFIG_IMX6_THERMAL
  18
  19 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  20 #define CONFIG_BOARD_EARLY_INIT_F
  21 #define CONFIG_BOARD_LATE_INIT
  22 #define CONFIG_MXC_UART
  23 #define CONFIG_CMD_FUSE
  24 #define CONFIG_MXC_OCOTP
  25
  26 /* MMC Configs */
  27 #define CONFIG_FSL_ESDHC
  28 #define CONFIG_FSL_USDHC
  29 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC2_BASE_ADDR
  30 #define CONFIG_MMC
  31 #define CONFIG_CMD_MMC
  32 #define CONFIG_GENERIC_MMC
  33 #define CONFIG_BOUNCE_BUFFER
  34 #define CONFIG_CMD_EXT4
  35 #define CONFIG_CMD_EXT4_WRITE
  36 #define CONFIG_CMD_FAT
  37 #define CONFIG_DOS_PARTITION
  38
  39 /* Ethernet Configuration */
  40 #define CONFIG_FEC_MXC
  41 #define CONFIG_CMD_PING
  42 #define CONFIG_CMD_DHCP
  43 #define CONFIG_CMD_MII
  44 #define CONFIG_CMD_NET
  45 #define CONFIG_MII
  46 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  47 #define CONFIG_FEC_XCV_TYPE             RGMII
  48 #define CONFIG_FEC_MXC_PHYADDR          0
  49 #define CONFIG_PHYLIB
  50 #define CONFIG_PHY_ATHEROS
  51
  52 /* Framebuffer */
  53 #define CONFIG_VIDEO
  54 #define CONFIG_VIDEO_IPUV3
  55 #define CONFIG_IPUV3_CLK                260000000
  56 #define CONFIG_CFB_CONSOLE
  57 #define CONFIG_VGA_AS_SINGLE_DEVICE
  58 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
  59 #define CONFIG_VIDEO_BMP_RLE8
  60 #define CONFIG_SPLASH_SCREEN
  61 #define CONFIG_SPLASH_SCREEN_ALIGN
  62 #define CONFIG_BMP_16BPP
  63 #define CONFIG_VIDEO_LOGO
  64 #define CONFIG_VIDEO_BMP_LOGO
  65 #define CONFIG_IMX_HDMI
  66 #define CONFIG_CMD_HDMIDETECT
  67 #define CONFIG_IMX_VIDEO_SKIP
  68 #define CONFIG_CONSOLE_MUX
  69
  70 /* USB */
  71 #define CONFIG_CMD_USB
  72 #define CONFIG_USB_EHCI
  73 #define CONFIG_USB_EHCI_MX6
  74 #define CONFIG_USB_STORAGE
  75 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  76 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
  77 #define CONFIG_MXC_USB_FLAGS            0
  78 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
  79 #define CONFIG_USB_KEYBOARD
  80 #define CONFIG_SYS_USB_EVENT_POLL
  81 #define CONFIG_PREBOOT \
  82         "if hdmidet; then " \
  83                 "usb start; "                  \
  84                 "setenv stdin  serial,usbkbd; "\
  85                 "setenv stdout serial,vga; "   \
  86                 "setenv stderr serial,vga; "   \
  87         "else " \
  88                 "setenv stdin  serial; " \
  89                 "setenv stdout serial; " \
  90                 "setenv stderr serial; " \
  91         "fi;"
  92
  93 /* Command definition */
  94 #define CONFIG_CMD_BOOTZ
  95 #define CONFIG_CMD_SETEXPR
  96
  97 #define CONFIG_MXC_UART_BASE    UART1_BASE
  98 #define CONFIG_CONSOLE_DEV      "ttymxc0"
  99 #define CONFIG_MMCROOT          "/dev/mmcblk0p2"
 100 #define CONFIG_SYS_FSL_USDHC_NUM        1
 101 #define CONFIG_SYS_MMC_ENV_DEV          0       /* SDHC2 */
 102
 103 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 104 #define CONFIG_EXTRA_ENV_SETTINGS \
 105         "script=boot.scr\0" \
 106         "image=zImage\0" \
 107         "fdtfile=undefined\0" \
 108         "fdt_addr_r=0x18000000\0" \
 109         "boot_fdt=try\0" \
 110         "ip_dyn=yes\0" \
 111         "console=" CONFIG_CONSOLE_DEV "\0" \
 112         "bootm_size=0x10000000\0" \
 113         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
 114         "mmcpart=1\0" \
 115         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
 116         "update_sd_firmware=" \
 117                 "if test ${ip_dyn} = yes; then " \
 118                         "setenv get_cmd dhcp; " \
 119                 "else " \
 120                         "setenv get_cmd tftp; " \
 121                 "fi; " \
 122                 "if mmc dev ${mmcdev}; then "   \
 123                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 124                                 "setexpr fw_sz ${filesize} / 0x200; " \
 125                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 126                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 127                         "fi; "  \
 128                 "fi\0" \
 129         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 130                 "root=${mmcroot}\0" \
 131         "loadbootscript=" \
 132                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 133         "bootscript=echo Running bootscript from mmc ...; " \
 134                 "source\0" \
 135         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 136         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile}\0" \
 137         "mmcboot=echo Booting from mmc ...; " \
 138                 "run mmcargs; " \
 139                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 140                         "if run loadfdt; then " \
 141                                 "bootz ${loadaddr} - ${fdt_addr_r}; " \
 142                         "else " \
 143                                 "if test ${boot_fdt} = try; then " \
 144                                         "bootz; " \
 145                                 "else " \
 146                                         "echo WARN: Cannot load the DT; " \
 147                                 "fi; " \
 148                         "fi; " \
 149                 "else " \
 150                         "bootz; " \
 151                 "fi;\0" \
 152         "netargs=setenv bootargs console=${console},${baudrate} " \
 153                 "root=/dev/nfs " \
 154                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 155         "netboot=echo Booting from net ...; " \
 156                 "run netargs; " \
 157                 "if test ${ip_dyn} = yes; then " \
 158                         "setenv get_cmd dhcp; " \
 159                 "else " \
 160                         "setenv get_cmd tftp; " \
 161                 "fi; " \
 162                 "${get_cmd} ${image}; " \
 163                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 164                         "if ${get_cmd} ${fdt_addr_r} ${fdtfile}; then " \
 165                                 "bootz ${loadaddr} - ${fdt_addr_r}; " \
 166                         "else " \
 167                                 "if test ${boot_fdt} = try; then " \
 168                                         "bootz; " \
 169                                 "else " \
 170                                         "echo WARN: Cannot load the DT; " \
 171                                 "fi; " \
 172                         "fi; " \
 173                 "else " \
 174                         "bootz; " \
 175                 "fi;\0" \
 176         "findfdt="\
 177                 "if test $board_name = HUMMINGBOARD && test $board_rev = MX6Q ; then " \
 178                         "setenv fdtfile imx6q-hummingboard.dtb; fi; " \
 179                 "if test $board_name = HUMMINGBOARD && test $board_rev = MX6DL ; then " \
 180                         "setenv fdtfile imx6dl-hummingboard.dtb; fi; " \
 181                 "if test $board_name = CUBOXI && test $board_rev = MX6Q ; then " \
 182                         "setenv fdtfile imx6q-cubox-i.dtb; fi; " \
 183                 "if test $board_name = CUBOXI && test $board_rev = MX6DL ; then " \
 184                         "setenv fdtfile imx6dl-cubox-i.dtb; fi; " \
 185                 "if test $fdtfile = undefined; then " \
 186                         "echo WARNING: Could not determine dtb to use; fi; \0" \
 187
 188 #define CONFIG_BOOTCOMMAND \
 189         "run findfdt; " \
 190         "mmc dev ${mmcdev};" \
 191         "if mmc rescan; then " \
 192                 "if run loadbootscript; then " \
 193                 "run bootscript; " \
 194                 "else " \
 195                         "if run loadimage; then " \
 196                                 "run mmcboot; " \
 197                         "else run netboot; " \
 198                         "fi; " \
 199                 "fi; " \
 200         "else run netboot; fi"
 201
 202 /* Miscellaneous configurable options */
 203 #define CONFIG_SYS_LONGHELP
 204 #define CONFIG_SYS_HUSH_PARSER
 205 #define CONFIG_AUTO_COMPLETE
 206 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 207
 208 #define CONFIG_CMDLINE_EDITING
 209
 210 /* Physical Memory Map */
 211 #define CONFIG_NR_DRAM_BANKS           1
 212 #define CONFIG_SYS_SDRAM_BASE          MMDC0_ARB_BASE_ADDR
 213 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 214 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 215
 216 #define CONFIG_SYS_INIT_SP_OFFSET \
 217         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 218 #define CONFIG_SYS_INIT_SP_ADDR \
 219         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 220
 221 /* Environment organization */
 222 #define CONFIG_ENV_SIZE                 (8 * 1024)
 223 #define CONFIG_ENV_IS_IN_MMC
 224 #define CONFIG_ENV_OFFSET               (8 * 64 * 1024)
 225
 226 #define CONFIG_OF_LIBFDT
 227 #define CONFIG_CMD_CACHE
 228
 229 #endif                         /* __MX6CUBOXI_CONFIG_H */