include/configs/mx6cuboxi.h

   1 /*
   2  * Copyright (C) 2015 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the SolidRun mx6 based boards
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8 #ifndef __MX6CUBOXI_CONFIG_H
   9 #define __MX6CUBOXI_CONFIG_H
  10
  11 #include <linux/sizes.h>
  12 #include <asm/arch/imx-regs.h>
  13 #include <asm/imx-common/gpio.h>
  14 #include "mx6_common.h"
  15
  16 #define CONFIG_MX6
  17 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  18 #define CONFIG_SPL_MMC_SUPPORT
  19 #include "imx6_spl.h"
  20
  21 #define CONFIG_DISPLAY_CPUINFO
  22 #define CONFIG_DISPLAY_BOARDINFO
  23 #define CONFIG_CMDLINE_TAG
  24 #define CONFIG_SETUP_MEMORY_TAGS
  25 #define CONFIG_INITRD_TAG
  26 #define CONFIG_REVISION_TAG
  27 #define CONFIG_IMX6_THERMAL
  28 #define CONFIG_SYS_GENERIC_BOARD
  29
  30 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  31 #define CONFIG_BOARD_EARLY_INIT_F
  32 #define CONFIG_BOARD_LATE_INIT
  33 #define CONFIG_MXC_GPIO
  34 #define CONFIG_MXC_UART
  35 #define CONFIG_CMD_FUSE
  36 #define CONFIG_MXC_OCOTP
  37
  38 /* MMC Configs */
  39 #define CONFIG_FSL_ESDHC
  40 #define CONFIG_FSL_USDHC
  41 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC2_BASE_ADDR
  42 #define CONFIG_MMC
  43 #define CONFIG_CMD_MMC
  44 #define CONFIG_GENERIC_MMC
  45 #define CONFIG_BOUNCE_BUFFER
  46 #define CONFIG_CMD_EXT4
  47 #define CONFIG_CMD_EXT4_WRITE
  48 #define CONFIG_CMD_FAT
  49 #define CONFIG_DOS_PARTITION
  50
  51 /* Ethernet Configuration */
  52 #define CONFIG_FEC_MXC
  53 #define CONFIG_CMD_PING
  54 #define CONFIG_CMD_DHCP
  55 #define CONFIG_CMD_MII
  56 #define CONFIG_CMD_NET
  57 #define CONFIG_MII
  58 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  59 #define CONFIG_FEC_XCV_TYPE             RGMII
  60 #define CONFIG_FEC_MXC_PHYADDR          0
  61 #define CONFIG_PHYLIB
  62 #define CONFIG_PHY_ATHEROS
  63
  64 /* allow to overwrite serial and ethaddr */
  65 #define CONFIG_ENV_OVERWRITE
  66 #define CONFIG_CONS_INDEX               1
  67 #define CONFIG_BAUDRATE                 115200
  68
  69 /* Framebuffer */
  70 #define CONFIG_VIDEO
  71 #define CONFIG_VIDEO_IPUV3
  72 #define CONFIG_IPUV3_CLK                260000000
  73 #define CONFIG_CFB_CONSOLE
  74 #define CONFIG_VGA_AS_SINGLE_DEVICE
  75 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
  76 #define CONFIG_VIDEO_BMP_RLE8
  77 #define CONFIG_SPLASH_SCREEN
  78 #define CONFIG_SPLASH_SCREEN_ALIGN
  79 #define CONFIG_BMP_16BPP
  80 #define CONFIG_VIDEO_LOGO
  81 #define CONFIG_VIDEO_BMP_LOGO
  82 #define CONFIG_IMX_HDMI
  83 #define CONFIG_CMD_HDMIDETECT
  84 #define CONFIG_IMX_VIDEO_SKIP
  85 #define CONFIG_CONSOLE_MUX
  86
  87 /* USB */
  88 #define CONFIG_CMD_USB
  89 #define CONFIG_USB_EHCI
  90 #define CONFIG_USB_EHCI_MX6
  91 #define CONFIG_USB_STORAGE
  92 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  93 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
  94 #define CONFIG_MXC_USB_FLAGS            0
  95 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
  96 #define CONFIG_USB_KEYBOARD
  97 #define CONFIG_SYS_USB_EVENT_POLL
  98 #define CONFIG_PREBOOT \
  99         "if hdmidet; then " \
 100                 "usb start; "                  \
 101                 "setenv stdin  serial,usbkbd; "\
 102                 "setenv stdout serial,vga; "   \
 103                 "setenv stderr serial,vga; "   \
 104         "else " \
 105                 "setenv stdin  serial; " \
 106                 "setenv stdout serial; " \
 107                 "setenv stderr serial; " \
 108         "fi;"
 109
 110 #define CONFIG_SYS_NO_FLASH
 111
 112 /* Command definition */
 113 #include <config_cmd_default.h>
 114
 115 #define CONFIG_CMD_BOOTZ
 116 #define CONFIG_CMD_SETEXPR
 117
 118 #define CONFIG_BOOTDELAY                1
 119
 120 #define CONFIG_LOADADDR                 0x12000000
 121 #define CONFIG_SYS_TEXT_BASE            0x17800000
 122
 123 #define CONFIG_MXC_UART_BASE    UART1_BASE
 124 #define CONFIG_CONSOLE_DEV      "ttymxc0"
 125 #define CONFIG_MMCROOT          "/dev/mmcblk0p2"
 126 #define CONFIG_SYS_FSL_USDHC_NUM        1
 127 #define CONFIG_SYS_MMC_ENV_DEV          0       /* SDHC2 */
 128
 129 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 130 #define CONFIG_EXTRA_ENV_SETTINGS \
 131         "script=boot.scr\0" \
 132         "image=zImage\0" \
 133         "fdtfile=undefined\0" \
 134         "fdt_addr_r=0x18000000\0" \
 135         "boot_fdt=try\0" \
 136         "ip_dyn=yes\0" \
 137         "console=" CONFIG_CONSOLE_DEV "\0" \
 138         "bootm_size=0x10000000\0" \
 139         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
 140         "mmcpart=1\0" \
 141         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
 142         "update_sd_firmware=" \
 143                 "if test ${ip_dyn} = yes; then " \
 144                         "setenv get_cmd dhcp; " \
 145                 "else " \
 146                         "setenv get_cmd tftp; " \
 147                 "fi; " \
 148                 "if mmc dev ${mmcdev}; then "   \
 149                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 150                                 "setexpr fw_sz ${filesize} / 0x200; " \
 151                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 152                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 153                         "fi; "  \
 154                 "fi\0" \
 155         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 156                 "root=${mmcroot}\0" \
 157         "loadbootscript=" \
 158                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 159         "bootscript=echo Running bootscript from mmc ...; " \
 160                 "source\0" \
 161         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 162         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile}\0" \
 163         "mmcboot=echo Booting from mmc ...; " \
 164                 "run mmcargs; " \
 165                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 166                         "if run loadfdt; then " \
 167                                 "bootz ${loadaddr} - ${fdt_addr_r}; " \
 168                         "else " \
 169                                 "if test ${boot_fdt} = try; then " \
 170                                         "bootz; " \
 171                                 "else " \
 172                                         "echo WARN: Cannot load the DT; " \
 173                                 "fi; " \
 174                         "fi; " \
 175                 "else " \
 176                         "bootz; " \
 177                 "fi;\0" \
 178         "netargs=setenv bootargs console=${console},${baudrate} " \
 179                 "root=/dev/nfs " \
 180                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 181         "netboot=echo Booting from net ...; " \
 182                 "run netargs; " \
 183                 "if test ${ip_dyn} = yes; then " \
 184                         "setenv get_cmd dhcp; " \
 185                 "else " \
 186                         "setenv get_cmd tftp; " \
 187                 "fi; " \
 188                 "${get_cmd} ${image}; " \
 189                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 190                         "if ${get_cmd} ${fdt_addr_r} ${fdtfile}; then " \
 191                                 "bootz ${loadaddr} - ${fdt_addr_r}; " \
 192                         "else " \
 193                                 "if test ${boot_fdt} = try; then " \
 194                                         "bootz; " \
 195                                 "else " \
 196                                         "echo WARN: Cannot load the DT; " \
 197                                 "fi; " \
 198                         "fi; " \
 199                 "else " \
 200                         "bootz; " \
 201                 "fi;\0" \
 202         "findfdt="\
 203                 "if test $board_name = HUMMINGBOARD && test $board_rev = MX6Q ; then " \
 204                         "setenv fdtfile imx6q-hummingboard.dtb; fi; " \
 205                 "if test $board_name = HUMMINGBOARD && test $board_rev = MX6DL ; then " \
 206                         "setenv fdtfile imx6dl-hummingboard.dtb; fi; " \
 207                 "if test $board_name = CUBOXI && test $board_rev = MX6Q ; then " \
 208                         "setenv fdtfile imx6q-cubox-i.dtb; fi; " \
 209                 "if test $board_name = CUBOXI && test $board_rev = MX6DL ; then " \
 210                         "setenv fdtfile imx6dl-cubox-i.dtb; fi; " \
 211                 "if test $fdtfile = undefined; then " \
 212                         "echo WARNING: Could not determine dtb to use; fi; \0" \
 213
 214 #define CONFIG_BOOTCOMMAND \
 215         "run findfdt; " \
 216         "mmc dev ${mmcdev};" \
 217         "if mmc rescan; then " \
 218                 "if run loadbootscript; then " \
 219                 "run bootscript; " \
 220                 "else " \
 221                         "if run loadimage; then " \
 222                                 "run mmcboot; " \
 223                         "else run netboot; " \
 224                         "fi; " \
 225                 "fi; " \
 226         "else run netboot; fi"
 227
 228 /* Miscellaneous configurable options */
 229 #define CONFIG_SYS_LONGHELP
 230 #define CONFIG_SYS_HUSH_PARSER
 231 #define CONFIG_AUTO_COMPLETE
 232 #define CONFIG_SYS_CBSIZE              256
 233 #define CONFIG_SYS_MAXARGS             16
 234 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 235
 236 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 237
 238 #define CONFIG_CMDLINE_EDITING
 239
 240 /* Physical Memory Map */
 241 #define CONFIG_NR_DRAM_BANKS           1
 242 #define CONFIG_SYS_SDRAM_BASE          MMDC0_ARB_BASE_ADDR
 243 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 244 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 245
 246 #define CONFIG_SYS_INIT_SP_OFFSET \
 247         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 248 #define CONFIG_SYS_INIT_SP_ADDR \
 249         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 250
 251 /* Environment organization */
 252 #define CONFIG_ENV_SIZE                 (8 * 1024)
 253 #define CONFIG_ENV_IS_IN_MMC
 254 #define CONFIG_ENV_OFFSET               (8 * 64 * 1024)
 255
 256 #define CONFIG_OF_LIBFDT
 257 #define CONFIG_CMD_CACHE
 258
 259 #endif                         /* __MX6CUBOXI_CONFIG_H */