1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Copyright (C) 2015 Freescale Semiconductor, Inc.
5 * Configuration settings for the SolidRun mx6 based boards
7 #ifndef __MX6CUBOXI_CONFIG_H
8 #define __MX6CUBOXI_CONFIG_H
10 #include <linux/stringify.h>
12 #include "mx6_common.h"
15 #define CFG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
18 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
20 /* Command definition */
22 #define CONFIG_MXC_UART_BASE UART1_BASE
24 #define CONFIG_EXTRA_ENV_SETTINGS \
25 "som_rev=undefined\0" \
26 "has_emmc=undefined\0" \
27 "fdtfile=undefined\0" \
28 "fdt_addr_r=0x18000000\0" \
29 "fdt_addr=0x18000000\0" \
30 "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
31 "pxefile_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
32 "scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
33 "ramdisk_addr_r=0x13000000\0" \
34 "ramdiskaddr=0x13000000\0" \
35 "initrd_high=0xffffffff\0" \
38 "bootm_size=0x10000000\0" \
39 "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
40 "finduuid=part uuid mmc 1:1 uuid\0" \
41 "update_sd_firmware=" \
42 "if test ${ip_dyn} = yes; then " \
43 "setenv get_cmd dhcp; " \
45 "setenv get_cmd tftp; " \
47 "if mmc dev ${mmcdev}; then " \
48 "if ${get_cmd} ${update_sd_firmware_filename}; then " \
49 "setexpr fw_sz ${filesize} / 0x200; " \
50 "setexpr fw_sz ${fw_sz} + 1; " \
51 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
55 "if test ${board_rev} = MX6Q; then " \
56 "setenv fdtprefix imx6q; fi; " \
57 "if test ${board_rev} = MX6DL; then " \
58 "setenv fdtprefix imx6dl; fi; " \
59 "if test ${som_rev} = V15; then " \
60 "setenv fdtsuffix -som-v15; fi; " \
61 "if test ${has_emmc} = yes; then " \
62 "setenv emmcsuffix -emmc; fi; " \
63 "if test ${board_name} = HUMMINGBOARD2 ; then " \
64 "setenv fdtfile ${fdtprefix}-hummingboard2${emmcsuffix}${fdtsuffix}.dtb; fi; " \
65 "if test ${board_name} = HUMMINGBOARD ; then " \
66 "setenv fdtfile ${fdtprefix}-hummingboard${emmcsuffix}${fdtsuffix}.dtb; fi; " \
67 "if test ${board_name} = CUBOXI ; then " \
68 "setenv fdtfile ${fdtprefix}-cubox-i${emmcsuffix}${fdtsuffix}.dtb; fi; " \
69 "if test ${fdtfile} = undefined; then " \
70 "echo WARNING: Could not determine dtb to use; fi; \0" \
73 #define BOOT_TARGET_DEVICES(func) \
81 #include <config_distro_bootcmd.h>
83 /* Physical Memory Map */
84 #define CFG_SYS_SDRAM_BASE MMDC0_ARB_BASE_ADDR
85 #define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
86 #define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE
88 /* Environment organization */
90 #endif /* __MX6CUBOXI_CONFIG_H */