Merge branch 'master' of git://git.denx.de/u-boot-sunxi
[platform/kernel/u-boot.git] / include / configs / mx53ppd.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright (C) 2011 Freescale Semiconductor, Inc.
4  * Jason Liu <r64343@freescale.com>
5  *
6  * Configuration settings for Freescale MX53 low cost board.
7  */
8
9 #ifndef __CONFIG_H
10 #define __CONFIG_H
11
12 #include <asm/arch/imx-regs.h>
13
14 #define CONSOLE_DEV     "ttymxc0"
15
16 #define CONFIG_CMDLINE_TAG
17 #define CONFIG_SETUP_MEMORY_TAGS
18 #define CONFIG_INITRD_TAG
19
20 #define CONFIG_SYS_FSL_CLK
21
22 /* Size of malloc() pool */
23 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
24
25 #define CONFIG_WATCHDOG_TIMEOUT_MSECS 8000
26
27 #define CONFIG_BOARD_LATE_INIT
28 #define CONFIG_REVISION_TAG
29
30 #define CONFIG_MXC_UART
31 #define CONFIG_MXC_UART_BASE    UART1_BASE
32
33 /* Eth Configs */
34
35 #define CONFIG_FEC_MXC
36 #define IMX_FEC_BASE    FEC_BASE_ADDR
37 #define CONFIG_FEC_MXC_PHYADDR  0x1F
38
39 /* USB Configs */
40 #define CONFIG_USB_EHCI_MX5
41 #define CONFIG_USB_HOST_ETHER
42 #define CONFIG_USB_ETHER_ASIX
43 #define CONFIG_USB_ETHER_MCS7830
44 #define CONFIG_USB_ETHER_SMSC95XX
45 #define CONFIG_MXC_USB_PORT     1
46 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
47 #define CONFIG_MXC_USB_FLAGS    0
48
49 #define CONFIG_SYS_RTC_BUS_NUM          2
50 #define CONFIG_SYS_I2C_RTC_ADDR 0x30
51
52 /* I2C Configs */
53 #define CONFIG_SYS_I2C
54 #define CONFIG_SYS_I2C_MXC
55 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
56 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
57 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
58
59 /* PMIC Controller */
60 #define CONFIG_POWER
61 #define CONFIG_POWER_I2C
62 #define CONFIG_DIALOG_POWER
63 #define CONFIG_POWER_FSL
64 #define CONFIG_POWER_FSL_MC13892
65 #define CONFIG_SYS_DIALOG_PMIC_I2C_ADDR 0x48
66 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR    0x8
67
68 /* allow to overwrite serial and ethaddr */
69 #define CONFIG_ENV_OVERWRITE
70 #define CONFIG_BAUDRATE                 115200
71
72 /* Command definition */
73
74 #define CONFIG_ETHPRIME         "FEC0"
75
76 #define CONFIG_LOADADDR         0x72000000      /* loadaddr env var */
77
78 #define PPD_CONFIG_NFS \
79         "nfsserver=192.168.252.95\0" \
80         "gatewayip=192.168.252.95\0" \
81         "netmask=255.255.255.0\0" \
82         "ipaddr=192.168.252.99\0" \
83         "kernsize=0x2000\0" \
84         "use_dhcp=0\0" \
85         "nfsroot=/opt/springdale/rd\0" \
86         "bootargs_nfs=setenv bootargs ${bootargs} root=/dev/nfs " \
87                 "${kern_ipconf} nfsroot=${nfsserver}:${nfsroot},v3,tcp rw\0" \
88         "choose_ip=if test $use_dhcp = 1; then setenv kern_ipconf ip=dhcp; " \
89                 "setenv getcmd dhcp; else setenv kern_ipconf " \
90                 "ip=${ipaddr}:${nfsserver}:${gatewayip}:${netmask}::eth0:off; " \
91                 "setenv getcmd tftp; fi\0" \
92         "nfs=run choose_ip setargs bootargs_nfs; ${getcmd} ${loadaddr} " \
93                 "${nfsserver}:${image}; bootm ${loadaddr}\0" \
94
95 #define CONFIG_EXTRA_ENV_SETTINGS \
96         PPD_CONFIG_NFS \
97         "image=/boot/fitImage\0" \
98         "fdt_high=0xffffffff\0" \
99         "dev=mmc\0" \
100         "devnum=2\0" \
101         "rootdev=mmcblk0p\0" \
102         "quiet=quiet loglevel=0\0" \
103         "console=" CONSOLE_DEV "\0" \
104         "lvds=ldb\0" \
105         "setargs=setenv bootargs ${lvds} jtag=on mem=2G " \
106                 "vt.global_cursor_default=0 bootcause=${bootcause} ${quiet} " \
107                 "console=${console} ${rtc_status}\0" \
108         "bootargs_emmc=setenv bootargs root=/dev/${rootdev}${partnum} ro " \
109                 "rootwait ${bootargs}\0" \
110         "doquiet=if ext2load ${dev} ${devnum}:5 0x7000A000 /boot/console; " \
111                 "then setenv quiet; fi\0" \
112         "hasfirstboot=ext2load ${dev} ${devnum}:${partnum} 0x7000A000 " \
113                 "/boot/bootcause/firstboot\0" \
114         "swappartitions=setexpr partnum 3 - ${partnum}\0" \
115         "failbootcmd=" \
116                 "ppd_lcd_enable; " \
117                 "msg=\"Monitor failed to start.  " \
118                         "Try again, or contact GE Service for support.\"; " \
119                 "echo $msg; " \
120                 "setenv stdout vga; " \
121                 "echo \"\n\n\n\n    \" $msg; " \
122                 "setenv stdout serial; " \
123                 "mw.b 0x7000A000 0xbc; " \
124                 "mw.b 0x7000A001 0x00; " \
125                 "ext4write ${dev} ${devnum}:5 0x7000A000 /boot/failures 2\0" \
126         "altbootcmd=" \
127                 "run doquiet; " \
128                 "setenv partnum 1; run hasfirstboot || setenv partnum 2; " \
129                 "run hasfirstboot || setenv partnum 0; " \
130                 "if test ${partnum} != 0; then " \
131                         "setenv bootcause REVERT; " \
132                         "run swappartitions loadimage doboot; " \
133                 "fi; " \
134                 "run failbootcmd\0" \
135         "loadimage=" \
136                 "ext2load ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \
137         "doboot=" \
138                 "echo Booting from ${dev}:${devnum}:${partnum} ...; " \
139                 "run setargs; " \
140                 "run bootargs_emmc; " \
141                 "bootm ${loadaddr}\0" \
142         "tryboot=" \
143                 "setenv partnum 1; run hasfirstboot || setenv partnum 2; " \
144                 "run loadimage || run swappartitions && run loadimage || " \
145                         "setenv partnum 0 && echo MISSING IMAGE;" \
146                 "run doboot; " \
147                 "run failbootcmd\0" \
148         "video-mode=" \
149                 "lcd:800x480-24@60,monitor=lcd\0" \
150
151 #define CONFIG_MMCBOOTCOMMAND \
152         "if mmc dev ${devnum}; then " \
153                 "run doquiet; " \
154                 "run tryboot; " \
155         "fi; " \
156
157 #define CONFIG_BOOTCOMMAND CONFIG_MMCBOOTCOMMAND
158
159 #define CONFIG_ARP_TIMEOUT      200UL
160
161 /* Miscellaneous configurable options */
162 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size */
163
164 #define CONFIG_SYS_MAXARGS      48      /* max number of command args */
165 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
166
167 #define CONFIG_SYS_MEMTEST_START       0x70000000
168 #define CONFIG_SYS_MEMTEST_END         0x70010000
169
170 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
171
172 /* Physical Memory Map */
173 #define PHYS_SDRAM_1                    CSD0_BASE_ADDR
174 #define PHYS_SDRAM_1_SIZE               (gd->bd->bi_dram[0].size)
175 #define PHYS_SDRAM_2                    CSD1_BASE_ADDR
176 #define PHYS_SDRAM_2_SIZE               (gd->bd->bi_dram[1].size)
177 #define PHYS_SDRAM_SIZE                 (gd->ram_size)
178
179 #define CONFIG_SYS_SDRAM_BASE           (PHYS_SDRAM_1)
180 #define CONFIG_SYS_INIT_RAM_ADDR        (IRAM_BASE_ADDR)
181 #define CONFIG_SYS_INIT_RAM_SIZE        (IRAM_SIZE)
182
183 #define CONFIG_SYS_INIT_SP_OFFSET \
184         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
185 #define CONFIG_SYS_INIT_SP_ADDR \
186         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
187
188 /* FLASH and environment organization */
189 #define CONFIG_ENV_OFFSET      (12 * 64 * 1024)
190 #define CONFIG_ENV_SIZE        (10 * 1024)
191 #define CONFIG_SYS_MMC_ENV_DEV 0
192
193 #define CONFIG_CMD_FUSE
194 #define CONFIG_FSL_IIM
195
196 #define CONFIG_SYS_I2C_SPEED    100000
197
198 /* I2C1 */
199 #define CONFIG_SYS_NUM_I2C_BUSES        9
200 #define CONFIG_SYS_I2C_MAX_HOPS         1
201 #define CONFIG_SYS_I2C_BUSES    {       {0, {I2C_NULL_HOP} }, \
202                                         {0, {{I2C_MUX_PCA9547, 0x70, 0} } }, \
203                                         {0, {{I2C_MUX_PCA9547, 0x70, 1} } }, \
204                                         {0, {{I2C_MUX_PCA9547, 0x70, 2} } }, \
205                                         {0, {{I2C_MUX_PCA9547, 0x70, 3} } }, \
206                                         {0, {{I2C_MUX_PCA9547, 0x70, 4} } }, \
207                                         {0, {{I2C_MUX_PCA9547, 0x70, 5} } }, \
208                                         {0, {{I2C_MUX_PCA9547, 0x70, 6} } }, \
209                                         {0, {{I2C_MUX_PCA9547, 0x70, 7} } }, \
210                                 }
211
212 #define CONFIG_BCH
213
214 /* Backlight Control */
215 #define CONFIG_PWM_IMX
216 #define CONFIG_IMX6_PWM_PER_CLK 66666000
217
218 #endif                          /* __CONFIG_H */