include/configs/mx53ppd.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2011 Freescale Semiconductor, Inc.
   4  * Jason Liu <r64343@freescale.com>
   5  *
   6  * Configuration settings for Freescale MX53 low cost board.
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #include <asm/arch/imx-regs.h>
  13
  14 #define CONFIG_CMDLINE_TAG
  15 #define CONFIG_SETUP_MEMORY_TAGS
  16 #define CONFIG_INITRD_TAG
  17
  18 #define CONFIG_SYS_FSL_CLK
  19
  20 /* Size of malloc() pool */
  21 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
  22
  23 #define CONFIG_BOARD_LATE_INIT
  24 #define CONFIG_REVISION_TAG
  25
  26 /* USB Configs */
  27 #define CONFIG_USB_HOST_ETHER
  28 #define CONFIG_USB_ETHER_ASIX
  29 #define CONFIG_USB_ETHER_MCS7830
  30 #define CONFIG_USB_ETHER_SMSC95XX
  31 #define CONFIG_MXC_USB_PORT     1
  32 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
  33 #define CONFIG_MXC_USB_FLAGS    0
  34
  35 /* allow to overwrite serial and ethaddr */
  36 #define CONFIG_ENV_OVERWRITE
  37 #define CONFIG_BAUDRATE                 115200
  38
  39 /* Command definition */
  40
  41 #define CONFIG_LOADADDR         0x72000000      /* loadaddr env var */
  42
  43 #define PPD_CONFIG_NFS \
  44         "nfsserver=192.168.252.95\0" \
  45         "gatewayip=192.168.252.95\0" \
  46         "netmask=255.255.255.0\0" \
  47         "ipaddr=192.168.252.99\0" \
  48         "kernsize=0x2000\0" \
  49         "use_dhcp=0\0" \
  50         "nfsroot=/opt/springdale/rd\0" \
  51         "bootargs_nfs=setenv bootargs ${bootargs} root=/dev/nfs " \
  52                 "${kern_ipconf} nfsroot=${nfsserver}:${nfsroot},v3,tcp rw\0" \
  53         "choose_ip=if test $use_dhcp = 1; then setenv kern_ipconf ip=dhcp; " \
  54                 "setenv getcmd dhcp; else setenv kern_ipconf " \
  55                 "ip=${ipaddr}:${nfsserver}:${gatewayip}:${netmask}::eth0:off; " \
  56                 "setenv getcmd tftp; fi\0" \
  57         "nfs=run choose_ip setargs bootargs_nfs; ${getcmd} ${loadaddr} " \
  58                 "${nfsserver}:${image}; bootm ${loadaddr}\0" \
  59
  60 #define CONFIG_EXTRA_ENV_SETTINGS \
  61         PPD_CONFIG_NFS \
  62         "image=/boot/fitImage\0" \
  63         "fdt_high=0xffffffff\0" \
  64         "dev=mmc\0" \
  65         "devnum=2\0" \
  66         "rootdev=mmcblk0p\0" \
  67         "quiet=quiet loglevel=0\0" \
  68         "lvds=ldb\0" \
  69         "setargs=setenv bootargs ${lvds} jtag=on mem=2G " \
  70                 "vt.global_cursor_default=0 bootcause=${bootcause} ${quiet}\0" \
  71         "bootargs_emmc=setenv bootargs root=/dev/${rootdev}${partnum} ro " \
  72                 "rootwait ${bootargs}\0" \
  73         "doquiet=if ext2load ${dev} ${devnum}:5 0x7000A000 /boot/console; " \
  74                 "then setenv quiet; fi\0" \
  75         "hasfirstboot=ext2load ${dev} ${devnum}:${partnum} 0x7000A000 " \
  76                 "/boot/bootcause/firstboot\0" \
  77         "swappartitions=setexpr partnum 3 - ${partnum}\0" \
  78         "failbootcmd=" \
  79                 "cls; " \
  80                 "setcurs 5 4; " \
  81                 "lcdputs \"Monitor failed to start. " \
  82                 "Try again, or contact GE Service for support.\"; " \
  83                 "bootcount reset; \0" \
  84         "altbootcmd=" \
  85                 "run doquiet; " \
  86                 "setenv partnum 1; run hasfirstboot || setenv partnum 2; " \
  87                 "run hasfirstboot || setenv partnum 0; " \
  88                 "if test ${partnum} != 0; then " \
  89                         "setenv bootcause REVERT; " \
  90                         "run swappartitions loadimage doboot; " \
  91                 "fi; " \
  92                 "run failbootcmd\0" \
  93         "loadimage=" \
  94                 "ext2load ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \
  95         "doboot=" \
  96                 "echo Booting from ${dev}:${devnum}:${partnum} ...; " \
  97                 "run setargs; " \
  98                 "run bootargs_emmc; " \
  99                 "bootm ${loadaddr}\0" \
 100         "tryboot=" \
 101                 "setenv partnum 1; run hasfirstboot || setenv partnum 2; " \
 102                 "run loadimage || run swappartitions && run loadimage || " \
 103                         "setenv partnum 0 && echo MISSING IMAGE;" \
 104                 "run doboot; " \
 105                 "run failbootcmd\0" \
 106         "video-mode=" \
 107                 "lcd:800x480-24@60,monitor=lcd\0" \
 108
 109 #define CONFIG_MMCBOOTCOMMAND \
 110         "if mmc dev ${devnum}; then " \
 111                 "run doquiet; " \
 112                 "run tryboot; " \
 113         "fi; " \
 114
 115 #define CONFIG_BOOTCOMMAND CONFIG_MMCBOOTCOMMAND
 116
 117 #define CONFIG_ARP_TIMEOUT      200UL
 118
 119 /* Miscellaneous configurable options */
 120 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size */
 121
 122 #define CONFIG_SYS_MAXARGS      48      /* max number of command args */
 123 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
 124
 125 #define CONFIG_SYS_MEMTEST_START       0x70000000
 126 #define CONFIG_SYS_MEMTEST_END         0x70010000
 127
 128 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 129
 130 /* Physical Memory Map */
 131 #define PHYS_SDRAM_1                    CSD0_BASE_ADDR
 132 #define PHYS_SDRAM_1_SIZE               (gd->bd->bi_dram[0].size)
 133 #define PHYS_SDRAM_2                    CSD1_BASE_ADDR
 134 #define PHYS_SDRAM_2_SIZE               (gd->bd->bi_dram[1].size)
 135 #define PHYS_SDRAM_SIZE                 (gd->ram_size)
 136
 137 #define CONFIG_SYS_SDRAM_BASE           (PHYS_SDRAM_1)
 138 #define CONFIG_SYS_INIT_RAM_ADDR        (IRAM_BASE_ADDR)
 139 #define CONFIG_SYS_INIT_RAM_SIZE        (IRAM_SIZE)
 140
 141 #define CONFIG_SYS_INIT_SP_OFFSET \
 142         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 143 #define CONFIG_SYS_INIT_SP_ADDR \
 144         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 145
 146 /* FLASH and environment organization */
 147 #define CONFIG_SYS_MMC_ENV_DEV 0
 148
 149 #define CONFIG_CMD_FUSE
 150 #define CONFIG_FSL_IIM
 151
 152 #define CONFIG_BCH
 153
 154 /* Backlight Control */
 155 #define CONFIG_IMX6_PWM_PER_CLK 66666000
 156
 157 #define CONFIG_IMX_VIDEO_SKIP
 158
 159 #endif                          /* __CONFIG_H */