Merge branch 'master' of git://git.denx.de/u-boot-i2c
[platform/kernel/u-boot.git] / include / configs / mx53loco.h
1 /*
2  * Copyright (C) 2011 Freescale Semiconductor, Inc.
3  * Jason Liu <r64343@freescale.com>
4  *
5  * Configuration settings for Freescale MX53 low cost board.
6  *
7  * SPDX-License-Identifier:     GPL-2.0+ 
8  */
9
10 #ifndef __CONFIG_H
11 #define __CONFIG_H
12
13 #define CONFIG_MX53
14
15 #define CONFIG_DISPLAY_BOARDINFO
16
17 #define CONFIG_MACH_TYPE        MACH_TYPE_MX53_LOCO
18
19 #include <asm/arch/imx-regs.h>
20
21 #define CONFIG_CMDLINE_TAG
22 #define CONFIG_SETUP_MEMORY_TAGS
23 #define CONFIG_INITRD_TAG
24
25 /* Size of malloc() pool */
26 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
27
28 #define CONFIG_BOARD_EARLY_INIT_F
29 #define CONFIG_BOARD_LATE_INIT
30 #define CONFIG_MXC_GPIO
31 #define CONFIG_REVISION_TAG
32
33 #define CONFIG_MXC_UART
34 #define CONFIG_MXC_UART_BASE    UART1_BASE
35
36 /* MMC Configs */
37 #define CONFIG_FSL_ESDHC
38 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
39 #define CONFIG_SYS_FSL_ESDHC_NUM        2
40
41 #define CONFIG_MMC
42 #define CONFIG_CMD_MMC
43 #define CONFIG_GENERIC_MMC
44 #define CONFIG_CMD_FAT
45 #define CONFIG_CMD_EXT2
46 #define CONFIG_DOS_PARTITION
47
48 /* Eth Configs */
49 #define CONFIG_MII
50
51 #define CONFIG_FEC_MXC
52 #define IMX_FEC_BASE    FEC_BASE_ADDR
53 #define CONFIG_FEC_MXC_PHYADDR  0x1F
54
55 #define CONFIG_CMD_PING
56 #define CONFIG_CMD_DHCP
57 #define CONFIG_CMD_MII
58 #define CONFIG_CMD_NET
59
60 /* USB Configs */
61 #define CONFIG_CMD_USB
62 #define CONFIG_CMD_FAT
63 #define CONFIG_USB_EHCI
64 #define CONFIG_USB_EHCI_MX5
65 #define CONFIG_USB_STORAGE
66 #define CONFIG_USB_HOST_ETHER
67 #define CONFIG_USB_ETHER_ASIX
68 #define CONFIG_USB_ETHER_SMSC95XX
69 #define CONFIG_MXC_USB_PORT     1
70 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
71 #define CONFIG_MXC_USB_FLAGS    0
72
73 /* I2C Configs */
74 #define CONFIG_HARD_I2C
75 #define CONFIG_I2C_MXC
76 #define CONFIG_SYS_I2C_BASE             I2C1_BASE_ADDR
77 #define CONFIG_SYS_I2C_SPEED            100000
78
79 /* PMIC Controller */
80 #define CONFIG_POWER
81 #define CONFIG_POWER_I2C
82 #define CONFIG_DIALOG_POWER
83 #define CONFIG_POWER_FSL
84 #define CONFIG_PMIC_FSL_MC13892
85 #define CONFIG_SYS_DIALOG_PMIC_I2C_ADDR 0x48
86 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR    0x8
87
88 /* allow to overwrite serial and ethaddr */
89 #define CONFIG_ENV_OVERWRITE
90 #define CONFIG_CONS_INDEX               1
91 #define CONFIG_BAUDRATE                 115200
92
93 /* Command definition */
94 #include <config_cmd_default.h>
95 #define CONFIG_CMD_BOOTZ
96
97 #undef CONFIG_CMD_IMLS
98
99 #define CONFIG_BOOTDELAY        1
100
101 #define CONFIG_ETHPRIME         "FEC0"
102
103 #define CONFIG_LOADADDR         0x72000000      /* loadaddr env var */
104 #define CONFIG_SYS_TEXT_BASE    0x77800000
105
106 #define CONFIG_EXTRA_ENV_SETTINGS \
107         "script=boot.scr\0" \
108         "uimage=uImage\0" \
109         "fdt_file=imx53-qsb.dtb\0" \
110         "fdt_addr=0x71000000\0" \
111         "boot_fdt=try\0" \
112         "ip_dyn=yes\0" \
113         "mmcdev=0\0" \
114         "mmcpart=1\0" \
115         "mmcroot=/dev/mmcblk0p2 rw rootwait\0" \
116         "mmcargs=setenv bootargs console=ttymxc0,${baudrate} root=${mmcroot}\0" \
117         "loadbootscript=" \
118                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
119         "bootscript=echo Running bootscript from mmc ...; " \
120                 "source\0" \
121         "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
122         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
123         "mmcboot=echo Booting from mmc ...; " \
124                 "run mmcargs; " \
125                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
126                         "if run loadfdt; then " \
127                                 "bootm ${loadaddr} - ${fdt_addr}; " \
128                         "else " \
129                                 "if test ${boot_fdt} = try; then " \
130                                         "bootm; " \
131                                 "else " \
132                                         "echo WARN: Cannot load the DT; " \
133                                 "fi; " \
134                         "fi; " \
135                 "else " \
136                         "bootm; " \
137                 "fi;\0" \
138         "netargs=setenv bootargs console=ttymxc0,${baudrate} " \
139                 "root=/dev/nfs " \
140                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
141         "netboot=echo Booting from net ...; " \
142                 "run netargs; " \
143                 "if test ${ip_dyn} = yes; then " \
144                         "setenv get_cmd dhcp; " \
145                 "else " \
146                         "setenv get_cmd tftp; " \
147                 "fi; " \
148                 "${get_cmd} ${uimage}; " \
149                 "if test ${boot_fdt} = yes ||  test ${boot_fdt} = try; then " \
150                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
151                                 "bootm ${loadaddr} - ${fdt_addr}; " \
152                         "else " \
153                                 "if test ${boot_fdt} = try; then " \
154                                         "bootm; " \
155                                 "else " \
156                                         "echo ERROR: Cannot load the DT; " \
157                                         "exit; " \
158                                 "fi; " \
159                         "fi; " \
160                 "else " \
161                         "bootm; " \
162                 "fi;\0"
163
164 #define CONFIG_BOOTCOMMAND \
165         "mmc dev ${mmcdev}; if mmc rescan; then " \
166                 "if run loadbootscript; then " \
167                         "run bootscript; " \
168                 "else " \
169                         "if run loaduimage; then " \
170                                 "run mmcboot; " \
171                         "else run netboot; " \
172                         "fi; " \
173                 "fi; " \
174         "else run netboot; fi"
175
176 #define CONFIG_ARP_TIMEOUT      200UL
177
178 /* Miscellaneous configurable options */
179 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
180 #define CONFIG_SYS_HUSH_PARSER          /* use "hush" command parser */
181 #define CONFIG_SYS_PROMPT               "MX53LOCO U-Boot > "
182 #define CONFIG_AUTO_COMPLETE
183 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
184
185 /* Print Buffer Size */
186 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
187 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
188 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
189
190 #define CONFIG_SYS_MEMTEST_START       0x70000000
191 #define CONFIG_SYS_MEMTEST_END         0x70010000
192
193 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
194
195 #define CONFIG_SYS_HZ           1000
196 #define CONFIG_CMDLINE_EDITING
197
198 /* Physical Memory Map */
199 #define CONFIG_NR_DRAM_BANKS    2
200 #define PHYS_SDRAM_1            CSD0_BASE_ADDR
201 #define PHYS_SDRAM_1_SIZE       (512 * 1024 * 1024)
202 #define PHYS_SDRAM_2            CSD1_BASE_ADDR
203 #define PHYS_SDRAM_2_SIZE       (512 * 1024 * 1024)
204 #define PHYS_SDRAM_SIZE         (PHYS_SDRAM_1_SIZE + PHYS_SDRAM_2_SIZE)
205
206 #define CONFIG_SYS_SDRAM_BASE           (PHYS_SDRAM_1)
207 #define CONFIG_SYS_INIT_RAM_ADDR        (IRAM_BASE_ADDR)
208 #define CONFIG_SYS_INIT_RAM_SIZE        (IRAM_SIZE)
209
210 #define CONFIG_SYS_INIT_SP_OFFSET \
211         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
212 #define CONFIG_SYS_INIT_SP_ADDR \
213         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
214
215 /* FLASH and environment organization */
216 #define CONFIG_SYS_NO_FLASH
217
218 #define CONFIG_ENV_OFFSET      (6 * 64 * 1024)
219 #define CONFIG_ENV_SIZE        (8 * 1024)
220 #define CONFIG_ENV_IS_IN_MMC
221 #define CONFIG_SYS_MMC_ENV_DEV 0
222
223 #define CONFIG_OF_LIBFDT
224
225 #define CONFIG_CMD_SATA
226 #ifdef CONFIG_CMD_SATA
227         #define CONFIG_DWC_AHSATA
228         #define CONFIG_SYS_SATA_MAX_DEVICE      1
229         #define CONFIG_DWC_AHSATA_PORT_ID       0
230         #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_BASE_ADDR
231         #define CONFIG_LBA48
232         #define CONFIG_LIBATA
233 #endif
234
235 /* Framebuffer and LCD */
236 #define CONFIG_PREBOOT
237 #define CONFIG_VIDEO
238 #define CONFIG_VIDEO_IPUV3
239 #define CONFIG_CFB_CONSOLE
240 #define CONFIG_VGA_AS_SINGLE_DEVICE
241 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
242 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
243 #define CONFIG_VIDEO_BMP_RLE8
244 #define CONFIG_SPLASH_SCREEN
245 #define CONFIG_BMP_16BPP
246 #define CONFIG_VIDEO_LOGO
247 #define CONFIG_IPUV3_CLK        200000000
248
249 #endif                          /* __CONFIG_H */