include/configs/mx53cx9020.h

   1 /*
   2  * Copyright (C) 2015  Beckhoff Automation GmbH & Co. KG
   3  * Patrick Bruenn <p.bruenn@beckhoff.com>
   4  *
   5  * Configuration settings for Beckhoff CX9020.
   6  *
   7  * Based on Freescale's Linux i.MX mx53loco.h file:
   8  * Copyright (C) 2010-2011 Freescale Semiconductor.
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #ifndef __CONFIG_H
  14 #define __CONFIG_H
  15
  16 #include <asm/arch/imx-regs.h>
  17
  18 #define CONFIG_CMDLINE_TAG
  19 #define CONFIG_SETUP_MEMORY_TAGS
  20 #define CONFIG_INITRD_TAG
  21
  22 #define CONFIG_SYS_FSL_CLK
  23
  24 /* Size of malloc() pool */
  25 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
  26
  27 #define CONFIG_BOARD_EARLY_INIT_F
  28 #define CONFIG_BOARD_LATE_INIT
  29 #define CONFIG_MXC_GPIO
  30 #define CONFIG_REVISION_TAG
  31
  32 #define CONFIG_MXC_UART_BASE UART2_BASE
  33
  34 #define CONFIG_FPGA_COUNT 1
  35
  36 /* MMC Configs */
  37 #define CONFIG_FSL_ESDHC
  38 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  39 #define CONFIG_SYS_FSL_ESDHC_NUM        2
  40
  41 #define CONFIG_MMC
  42 #define CONFIG_GENERIC_MMC
  43
  44 /* bootz: zImage/initrd.img support */
  45 #define CONFIG_DOS_PARTITION
  46
  47 /* Eth Configs */
  48 #define CONFIG_MII
  49 #define IMX_FEC_BASE    FEC_BASE_ADDR
  50 #define CONFIG_ETHPRIME         "FEC0"
  51 #define CONFIG_FEC_MXC_PHYADDR  0x1F
  52
  53 /* USB Configs */
  54 #define CONFIG_USB_EHCI
  55 #define CONFIG_USB_EHCI_MX5
  56 #define CONFIG_USB_STORAGE
  57 #define CONFIG_USB_HOST_ETHER
  58 #define CONFIG_USB_ETHER_ASIX
  59 #define CONFIG_USB_ETHER_MCS7830
  60 #define CONFIG_USB_ETHER_SMSC95XX
  61 #define CONFIG_MXC_USB_PORT     1
  62 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
  63 #define CONFIG_MXC_USB_FLAGS    0
  64
  65 /* allow to overwrite serial and ethaddr */
  66 #define CONFIG_ENV_OVERWRITE
  67 #define CONFIG_CONS_INDEX               1
  68 #define CONFIG_BAUDRATE                 115200
  69
  70 /* Command definition */
  71 #define CONFIG_SUPPORT_RAW_INITRD
  72
  73 #define CONFIG_LOADADDR         0x70010000      /* loadaddr env var */
  74 #define CONFIG_SYS_TEXT_BASE    0x77800000
  75
  76 #define CONFIG_EXTRA_ENV_SETTINGS \
  77         "fdt_addr=0x71ff0000\0" \
  78         "rdaddr=0x72000000\0" \
  79         "console=ttymxc1,115200\0" \
  80         "uenv=/boot/uEnv.txt\0" \
  81         "optargs=\0" \
  82         "cmdline=\0" \
  83         "mmcdev=0\0" \
  84         "mmcpart=1\0" \
  85         "mmcrootfstype=ext4 rootwait fixrtc\0" \
  86         "mmcargs=setenv bootargs console=${console} " \
  87                 "${optargs} " \
  88                 "root=/dev/mmcblk${mmcdev}p${mmcpart} ro " \
  89                 "rootfstype=${mmcrootfstype} " \
  90                 "${cmdline}\0" \
  91         "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
  92         "loadrd=load mmc ${bootpart} ${rdaddr} ${bootdir}/${rdfile};" \
  93                 "setenv rdsize ${filesize}\0" \
  94         "loadfdt=echo loading ${fdt_path} ...;" \
  95                 "load mmc ${bootpart} ${fdt_addr} ${fdt_path}\0" \
  96         "mmcboot=mmc dev ${mmcdev}; " \
  97                 "if mmc rescan; then " \
  98                         "echo SD/MMC found on device ${mmcdev};" \
  99                         "echo Checking for: ${uenv} ...;" \
 100                         "setenv bootpart ${mmcdev}:${mmcpart};" \
 101                         "if test -e mmc ${bootpart} ${uenv}; then " \
 102                                 "load mmc ${bootpart} ${loadaddr} ${uenv};" \
 103                                 "env import -t ${loadaddr} ${filesize};" \
 104                                 "echo Loaded environment from ${uenv};" \
 105                                 "if test -n ${dtb}; then " \
 106                                         "setenv fdt_file ${dtb};" \
 107                                         "echo Using: dtb=${fdt_file} ...;" \
 108                                 "fi;" \
 109                                 "echo Checking for uname_r in ${uenv}...;" \
 110                                 "if test -n ${uname_r}; then " \
 111                                         "echo Running uname_boot ...;" \
 112                                         "run uname_boot;" \
 113                                 "fi;" \
 114                         "fi;" \
 115                 "fi;\0" \
 116         "uname_boot="\
 117                 "setenv bootdir /boot; " \
 118                 "setenv bootfile vmlinuz-${uname_r}; " \
 119                 "setenv ccatfile /boot/ccat.rbf; " \
 120                 "echo loading CCAT firmware from ${ccatfile}; " \
 121                 "load mmc ${bootpart} ${loadaddr} ${ccatfile}; " \
 122                 "fpga load 0 ${loadaddr} ${filesize}; " \
 123                 "if test -e mmc ${bootpart} ${bootdir}/${bootfile}; then " \
 124                         "echo loading ${bootdir}/${bootfile} ...; " \
 125                         "run loadimage;" \
 126                         "setenv fdt_path /boot/dtbs/${uname_r}/${fdt_file}; " \
 127                         "if test -e mmc ${bootpart} ${fdt_path}; then " \
 128                                 "run loadfdt;" \
 129                         "else " \
 130                                 "echo; echo unable to find ${fdt_file} ...;" \
 131                                 "echo booting legacy ...;"\
 132                                 "run mmcargs;" \
 133                                 "echo debug: [${bootargs}] ... ;" \
 134                                 "echo debug: [bootz ${loadaddr}] ... ;" \
 135                                 "bootz ${loadaddr}; " \
 136                         "fi;" \
 137                         "run mmcargs;" \
 138                         "echo debug: [${bootargs}] ... ;" \
 139                         "echo debug: [bootz ${loadaddr} - ${fdt_addr}] ... ;" \
 140                         "bootz ${loadaddr} - ${fdt_addr}; " \
 141                 "fi;\0"
 142
 143 #define CONFIG_BOOTCOMMAND \
 144         "run mmcboot;"
 145
 146 #define CONFIG_ARP_TIMEOUT      200UL
 147
 148 /* Miscellaneous configurable options */
 149 #define CONFIG_SYS_LONGHELP     /* undef to save memory */
 150 #define CONFIG_AUTO_COMPLETE
 151 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
 152
 153 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
 154 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE   /* Boot Argument Buffer Size */
 155
 156 #define CONFIG_SYS_MEMTEST_START       0x70000000
 157 #define CONFIG_SYS_MEMTEST_END         0x70010000
 158
 159 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 160
 161 #define CONFIG_CMDLINE_EDITING
 162
 163 /* Physical Memory Map */
 164 #define CONFIG_NR_DRAM_BANKS    2
 165 #define PHYS_SDRAM_1                    CSD0_BASE_ADDR
 166 #define PHYS_SDRAM_1_SIZE               (gd->bd->bi_dram[0].size)
 167 #define PHYS_SDRAM_2                    CSD1_BASE_ADDR
 168 #define PHYS_SDRAM_2_SIZE               (gd->bd->bi_dram[1].size)
 169 #define PHYS_SDRAM_SIZE                 (gd->ram_size)
 170
 171 #define CONFIG_SYS_SDRAM_BASE           (PHYS_SDRAM_1)
 172 #define CONFIG_SYS_INIT_RAM_ADDR        (IRAM_BASE_ADDR)
 173 #define CONFIG_SYS_INIT_RAM_SIZE        (IRAM_SIZE)
 174
 175 #define CONFIG_SYS_INIT_SP_OFFSET \
 176         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 177 #define CONFIG_SYS_INIT_SP_ADDR \
 178         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 179
 180 /* FLASH and environment organization */
 181 #define CONFIG_SYS_NO_FLASH
 182
 183 #define CONFIG_ENV_OFFSET      (6 * 64 * 1024)
 184 #define CONFIG_ENV_SIZE        (8 * 1024)
 185 #define CONFIG_ENV_IS_IN_MMC
 186 #define CONFIG_SYS_MMC_ENV_DEV 0
 187
 188 /* Framebuffer and LCD */
 189 #define CONFIG_PREBOOT
 190 #define CONFIG_VIDEO_IPUV3
 191 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 192 #define CONFIG_VIDEO_BMP_RLE8
 193 #define CONFIG_SPLASH_SCREEN
 194 #define CONFIG_BMP_16BPP
 195 #define CONFIG_VIDEO_LOGO
 196 #define CONFIG_IPUV3_CLK        200000000
 197
 198 #endif /* __CONFIG_H */